Emad Natsheh

Dr. Emad Natsheh

Computer Engineering, An-Najah National University, Nablus, Palestinian Territory, Occupied
orcid
Associate Professor | AI & Machine Learning

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 April 2019 in IEEE Access
Verified
Journal Article
Open access
SSSufyan Samara
Sufyan Samara
Emad NatshehEmad Natsheh
Emad Natsheh
Photovoltaic panels system is becoming a popular choice as an alternative source of energy. This system comes with many challenges. To harness reliable energy efficiently, the photovoltaic panels system must remain in its best condition. This requires continuous maintenance and monitoring. However, in case of weather dependable energy yield change, and in order to identify if this change is normal due to environmental conditions, or is not normal because of faulty, or shaded, or dust-covered panel, an intelligent monitoring system is required. In this paper, we present a novel real-time monitoring system utilizing a small but efficient artificial neural network that is adequate to run on a low-cost system. The presented PV monitoring system can identify if the photovoltaic panel exhibit degradation due to fault conditions. In order to do that, the monitoring system implements an efficient small artificial neural network reference model. This artificial intelligent reference model is used to predict the output power of a normal operational photovoltaic panel under a set of changing environmental conditions. Moreover, the introduced monitoring system can monitor heterogamous PV panels with different manufacturing characteristics. In addition, the proposed monitoring system has the ability to log data online, over the internet, to facilitate other important features such as notification, system configuration update and further training, and data analysis. This paper discusses the different components of this novel artificial intelligent heterogeneous PV panels monitoring system.

1 July 2013 in IET Science, Measurement & Technology
Verified
Journal Article
Open access
PDF file
Emad NatshehEmad Natsheh
Emad Natsheh
ANAbdel Razzak Natsheh
Abdel Razzak Natsheh
AAAlhussein Albarbar
Alhussein Albarbar
This study presents a novel adaptive management strategy for power flow in standalone hybrid power systems. The method introduces an on‐line energy management by using a hierarchical controller between three energy sources: photovoltaic (PV) panels, battery storage and proton exchange membrane fuel cell. The proposed method includes a feed‐forward, back‐propagation neural network controller in the first layer, which is added in order to achieve the maximum power point for the different types of PV panels. In the second layer, a fuzzy logic controller has been developed to optimise performance by distributing the power inside the hybrid system and by managing the charge and discharge of the current flow. Finally, and in the third layer, local controllers are presented to regulate the fuel cell/battery set points in order to reach to best performance. Moreover, perturb and observe algorithm with two different controller techniques – the linear proportional‐integral (PI) and the non‐linear passivity‐based controller – are provided for a comparison with the proposed maximum power point tracking controller system. The comparison revealed the robustness of the proposed PV control system for solar irradiance and load resistance changes. Real‐time measured parameters and practical load profiles are used as inputs for the developed management system. The proposed model and its control strategy offer a proper tool for optimising the hybrid power system performance, such as the one used in smart‐house applications.

1 August 2016 in Energy
Verified
Journal Article
Closed access
Dhiaa Halboot MuhsenDhiaa Halboot Muhsen
Dhiaa Halboot Muhsen
AGAbu Bakar Ghazali
Abu Bakar Ghazali
TKTamer Khatib
Tamer Khatib
IAIssa Ahmed Abed
Issa Ahmed Abed
Emad NatshehEmad Natsheh
Emad Natsheh

1 December 2011
Verified
Conference Paper
Closed access
Emad NatshehEmad Natsheh
Emad Natsheh
AAA. Albarbar
A. Albarbar
JYJ. Yazdani
J. Yazdani
Performance optimization, system reliability and operational efficiency are key characteristics of smart grid systems. In this paper a novel model of smart grid-connected PV/WT hybrid system is developed. It comprises photovoltaic array, wind turbine, asynchronous (induction) generator, controller and converters. The model is implemented using MATLAB/SIMULINK software package. Perturb and observe (P&O) algorithm is used for maximizing the generated power based on maximum power point tracker (MPPT) implementation. The dynamic behavior of the proposed model is examined under different operating conditions. Solar irradiance, temperature and wind speed data is gathered from a grid connected, 28.8kW solar power system located in central Manchester. Real-time measured parameters are used as inputs for the developed system. The proposed model and its control strategy offer a proper tool for smart grid performance optimization.

4 December 2020 in Energies
Verified
Journal Article
Open access
PDF file
RARamez Abdallah
Ramez Abdallah
Emad NatshehEmad Natsheh
Emad Natsheh
Adel JuaidiAdel Juaidi
Adel Juaidi
SSSufyan Samara
Sufyan Samara
Francisco Manzano-AgugliaroFrancisco Manzano-Agugliaro
Francisco Manzano-Agugliaro
With the growing demand for clean and economically feasible renewable energy, solar photovoltaic (PV) system usage has increased. Among many factors, the tilt and azimuth angles are of great importance and influence in determining the photovoltaic panel’s efficiency to generate electricity. Although much research was conducted related to solar PV panels’ performance, this work critically determined the tilt and azimuth angles for PV panels in all countries worldwide. The optimum tilt and azimuth angles are estimated worldwide by the photovoltaic geographic information system (PVGIS). Also, annual and average daily solar irradiation incident on the tilted and oriented plate optimally (AR1 and DR1) are calculated. Besides, annual and average daily solar irradiation incident on plate tilt optimally and oriented because of the south in the northern hemisphere and because of the north in the southern hemisphere (AR2 and DR2) are estimated. PVGIS is also used to calculate the annual and average daily solar irradiation incident on the horizontal plate (AR3 and DR3). The data collected from PVGIS are used to develop an efficient and accurate artificial neural network model based on feed-forward neural network approach. This model is an essential subpart that can be used in an embedded system or an online system for further PV system analysis and optimization. The developed neural model reflected very high accuracy in predicting the PV panels’ optimal tilt and azimuth angles worldwide. The benefit of tilting is generally increased by increasing the latitude. As the latitude increases, the tilt factor (F) increases because of the increase in the optimum tilt angle by increasing the latitude. The optimal orientation is due to the north in the southern hemisphere and due to the south in the northern hemisphere for most cities worldwide. In sum, it can be concluded that the optimum tilt angle is equal to or greater than the latitude until the latitude 30°. The optimum tilt angle becomes less than the latitude, and the difference is increased until it reaches more than 20°. Hence in this study the aim is to develop a simple neural network model which can accurately predict the annual radiation and optimum tilt and azimuth angle in any region of the world and can be easily implemented in a low-cost microcontroller.

5 March 2020 in Sustainability
Verified
Journal Article
Open access
PDF file
SSSufyan Samara
Sufyan Samara
Emad NatshehEmad Natsheh
Emad Natsheh
The expanding use of photovoltaic (PV) systems as an alternative green source for electricity presents many challenges, one of which is the timely diagnosis of faults to maintain the quality and high productivity of such systems. In recent years, various studies have been conducted on the fault diagnosis of PV systems. However, very few instances of fault diagnostic techniques could be implemented on integrated circuits, and these techniques require costly and complex hardware. This work presents a novel and effective, yet small and implementable, fault diagnosis algorithm based on an artificial intelligent nonlinear autoregressive exogenous (NARX) neural network and Sugeno fuzzy inference. The algorithm uses Sugeno fuzzy inference to isolate and classify faults that may occur in a PV system. The fuzzy inference requires the actual sensed PV system output power, the predicted PV system output power, and the sensed surrounding conditions. An artificial intelligent NARX-based neural network is used to obtain the predicted PV system output power. The actual output power of the PV system and the surrounding conditions are obtained in real-time using sensors. The algorithm is proven to be implementable on a low-cost microcontroller. The obtained results indicate that the fault diagnosis algorithm can detect multiple faults such as open and short circuit degradation, faulty maximum power point tracking (MPPT), and conditions of partial shading (PS) that may affect the PV system. Moreover, radiation and temperature, among other non-linear associations of patterns between predictors, can be captured by the proposed algorithm to determine the accurate point of the maximum power for the PV system.