Pultrusion is a technological process in which fibers impregnated with resin move through the heated die and solidify into a composite profile with a constant cross section, as in the metallic die. The effectiveness and productivity of conventional pultrusion processes, preserving the quality of pultruded profiles, could be improved by process optimization or by the application of new, effective heating sources instead of electrical resistances with high heat losses. Due to the large dimension of the numerical problem and multiple iterations applied for the solution of government equations, an optimization methodology was developed, using the method of experimental design and the response surface technique. To develop microwave-assisted pultrusion processes, as well as pultrusion tooling design and process control, new effective electromagnetic-thermo-chemical finite element models and algorithms were developed by using general-purpose finite element software that results in considerable savings in development time and costs and makes available various modeling features of the finite element packages. The effectiveness and productivity of the optimized conventional pultrusion processes and the developed microwave-assisted pultrusion processes are estimated in comparison with the real pultrusion processes used in laboratory and industrial shops.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
A non-destructive technique – numerical-experimental method, based on vibration tests is applied for the characterization of lamina properties of asymmetric carbon fiber reinforced laminates. The main idea of this procedure is the determination of simple mathematical models (response surfaces), using the finite element analysis at the reference points of experimental design. Therefore, a significant reduction of computational efforts can be attained. For the purpose of characterization, two asymmetric carbon fiber laminated specimens were prepared, using the prepreg manual layout technology. To evaluate the elastic material properties obtained, the numerical resonant frequency, determinated by using identified material properties, were successfully compared with experimentally measured and high accuracy with average relative error less than 1% was reached.