Enrico Giacomini

Mr. Enrico Giacomini

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 September 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
EGEnrico Giacomini
Enrico Giacomini
LWLars G. Westerberg
Lars G. Westerberg
Low Reynolds number flows are central to the performance of airfoils used in small unmanned aerial vehicles (UAVs), micro air vehicles (MAVs), and aerodynamic platforms operating in rarefied atmospheres. Consequently, a deep understanding of airfoil behavior and accurate prediction of aerodynamic performance are essential for the optimal design of such systems. The present study employs Computational Fluid Dynamics (CFD) simulations to analyze the aerodynamic performance of a cambered plate at a Reynolds number of 10,000. Two Reynolds-Averaged Navier–Stokes (RANS) turbulence models, γ–Reθ and k-kL-ω, are utilized, along with the Unsteady Navier–Stokes (UNS) equations. The simulation results are compared against experimental data, with a focus on lift, drag, and pressure coefficients. The models studied perform moderately well at small angles of attack. The γ–Reθ model yields the lowest lift and drag errors (below 0.17 and 0.04, respectively), while the other models show significantly higher discrepancies, particularly in lift prediction. The γ–Reθ model demonstrates good overall accuracy, with notable deviation only in the prediction of the stall angle. In contrast, the k-kL-ω model and the UNS equations capture the general flow trend up to stall but fail to provide reliable predictions beyond that point. These findings indicate that the γ–Reθ model is the most suitable among those tested for low Reynolds number transitional flow simulations.

1 August 2024 in Aerospace
Verified
Journal Article
Open access
PDF file
EGEnrico Giacomini
Enrico Giacomini
LWLars G. Westerberg
Lars G. Westerberg
In 2021, the Ingenuity helicopter performed the inaugural flight on Mars, heralding a new epoch of exploration. However, the aerodynamics on Mars present unique challenges not found on Earth, such as low chord-based Reynolds number flows, which pose significant hurdles for future missions. The Ingenuity’s design incorporated a Reynolds number of approximately 20,000, dictated by the rotor’s dimensions. This paper investigates the implications of flows at a Reynolds number of 50,000, conducting a comparative analysis with those at 20,000 Re. The objective is to evaluate the feasibility of using larger rotor dimensions or extended airfoil chord lengths. An increase in the Reynolds number alters the size and position of Laminar Separation Bubbles (LSBs) on the airfoil, significantly impacting performance. This study leverages previous research on the structure and dynamics of LSBs to examine the flow around a cambered plate with 6% camber and 1% thickness in Martian conditions. This paper details the methods and mesh used for analysis, assesses airfoil performance, and provides a thorough explanation of the results obtained.

23 April 2025 in Aerospace
Verified
Journal Article
Open access
PDF file
EGEnrico Giacomini
Enrico Giacomini
LWLars G. Westerberg
Lars G. Westerberg
Unmanned aerial vehicles (UAVs) have emerged as practical and potentially advantageous tools for scientific investigation and reconnaissance of planetary surfaces, such as Mars. Their ability to traverse difficult terrain and provide high-resolution imagery has revolutionized the concept of exploration. However, operating drones in the Martian environment presents fundamental challenges due to the harsh conditions and the different atmosphere. Aerodynamic challenges include low chord-based Reynolds number flows and the presence of dust particles, which can accumulate on the airfoil surface. This paper investigates the accumulation of dust on cambered plates with 6% and 1% camber, suitable for the type of flow studied. The analysis is conducted for Reynolds numbers of around 20,000 as a result of dimension restrictions, assuming a wind speed ranging from 12 to 14 m/s. Computational simulations are performed using a 2D C-type mesh in ANSYS Fluent, employing the γ-Re SST turbulence model. Dust particle modeling is achieved through the Discrete Phase Model (DPM), with one-way coupling between phases. The accumulation of particles is monitored over a 6-month period with monthly intervals, and the airfoil is set at a 0° angle of attack. A deposition model, developed using user-defined functions in Fluent, considers particle–airfoil interaction and forces acting on particles. Results indicate a decrease in airfoil performance for negative angles of attack due to geometric changes, particularly due to accumulation on the bottom side near the tip. The discussion includes potential model enhancements and future research directions arising from the assumptions made in this study.