In this paper, numerical simulations of lubricating grease flow in the grease pocket of a double restriction seal geometry using computational fluid dynamics are presented. The grease is treated as a single-phase Herschel–Bulkley fluid with different rheological properties corresponding to NLGI grade 00, 1 and 2. The numerical code and rheology model have been validated with a semi-analytical solution based on flow measurements using microparticle image velocimetry. The flow has been modelled for low and high rotational speeds driving the flow, and elevated temperatures. Also, the evolution of contaminant particles in the grease pocket is investigated. It was found that the flow and velocity distribution in the pocket—and consequently the contaminant particle concentration evolution, is characterized by the shear thinning rheology of the grease. With higher shear rates in the grease and higher temperatures, the grease approaches a more Newtonian type of behaviour leading to a reduced yield and shear thinning characteristics directly affecting the grease ability to transport contaminant particles.
A non-transferred plasma torch is a device used to generate a steady thermal plasma jet. Plasma torches have the potential to replace fossil fuel burners used as heat sources in the process industry. Today, however, the available plasma torches are of small scale compared to the power used in the burners in the process industry. In order to understand the effects of large scales on the plasma flow dynamics, it is essential to understand the operation of the plasma torch under different operating conditions and for different geometries. In this study, the analysis of a non-transferred plasma torch has been carried out using both computational and experimental methods. Computationally, the magnetohydrodynamic (MHD) equations are solved using a single-fluid model on a 2D axisymmetric torch geometry. The experiments are performed using emission spectroscopy to measure the plasma jet temperature at the outlet. This paper explains the changes in the arc formation, temperature, and velocity for different working gases and power inputs. Furthermore, the possibilities and disadvantages of the MHD approach, considering a local thermal equilibrium, are discussed. It was found that in general, the computational temperature obtained is supported by the experimental and equilibrium data. The computational temperatures agree by within 10% with the experimental ones at the center of the plasma torch. The paper concludes by explaining the significant impact of input properties like working gas and power input on the output properties like velocity and temperature of plasma jet.
In this paper, the flow dynamics of polymer greases was investigated using micro-particle image velocimetry. Polymer greases have a different thickener structure, compared to widely used lithium-based greases, and they have the well-known ability to release oil. How these properties affect grease deformation and its ability to flow is investigated and compared to the corresponding behavior of a lithium complex grease with the same consistency. Two main tests were carried out, where velocity profiles in a straight channel were measured and analyzed, and velocity evolution during the transition period from a no-flow to a fully-established flow was measured, respectively. It was found that the polymer grease flow dynamics is different from that of the lithium grease. This indicates that the internal structure of the grease and the grease ability to bleed oil have a strong influence on the deformation on a global scale, which in turn entails other lubricating abilities for the two grease types.
Low Reynolds number flows are central to the performance of airfoils used in small unmanned aerial vehicles (UAVs), micro air vehicles (MAVs), and aerodynamic platforms operating in rarefied atmospheres. Consequently, a deep understanding of airfoil behavior and accurate prediction of aerodynamic performance are essential for the optimal design of such systems. The present study employs Computational Fluid Dynamics (CFD) simulations to analyze the aerodynamic performance of a cambered plate at a Reynolds number of 10,000. Two Reynolds-Averaged Navier–Stokes (RANS) turbulence models, – and , are utilized, along with the Unsteady Navier–Stokes (UNS) equations. The simulation results are compared against experimental data, with a focus on lift, drag, and pressure coefficients. The models studied perform moderately well at small angles of attack. The – model yields the lowest lift and drag errors (below 0.17 and 0.04, respectively), while the other models show significantly higher discrepancies, particularly in lift prediction. The – model demonstrates good overall accuracy, with notable deviation only in the prediction of the stall angle. In contrast, the model and the UNS equations capture the general flow trend up to stall but fail to provide reliable predictions beyond that point. These findings indicate that the – model is the most suitable among those tested for low Reynolds number transitional flow simulations.
In 2021, the Ingenuity helicopter performed the inaugural flight on Mars, heralding a new epoch of exploration. However, the aerodynamics on Mars present unique challenges not found on Earth, such as low chord-based Reynolds number flows, which pose significant hurdles for future missions. The Ingenuity’s design incorporated a Reynolds number of approximately 20,000, dictated by the rotor’s dimensions. This paper investigates the implications of flows at a Reynolds number of 50,000, conducting a comparative analysis with those at 20,000 Re. The objective is to evaluate the feasibility of using larger rotor dimensions or extended airfoil chord lengths. An increase in the Reynolds number alters the size and position of Laminar Separation Bubbles (LSBs) on the airfoil, significantly impacting performance. This study leverages previous research on the structure and dynamics of LSBs to examine the flow around a cambered plate with 6% camber and 1% thickness in Martian conditions. This paper details the methods and mesh used for analysis, assesses airfoil performance, and provides a thorough explanation of the results obtained.