This paper presents a simulation model environment for the popular and low-cost remotely operated vehicle (ROV) BlueROV2 implemented in Simulink™ which has been designed and experimentally validated for benchmark control algorithms for underwater vehicles. The BlueROV2 model is based on Fossen’s equations and includes a kinematic model of the vehicle, the hydrodynamics of vehicle and water interaction, a dynamic model of the thrusters, and, lastly, the gravitational/buoyant forces. The hydrodynamic parameters and thruster model have been validated in a test facility. The benchmark model also includes the ocean current, modeled as constant velocity. The tether connecting the ROV to the top-site facility has been modeled using the lumped mass method and is implemented as a force input to the ROV model. At last, to show the usefulness of the benchmark model, a case study is presented where a BlueROV2 is deployed to inspect an offshore monopile structure. The case study uses a sliding mode controller designed for the BlueROV2. The controller fulfills the design criteria defined for the case study by following the provided trajectory with a low error. It is concluded that the simulator establishes a benchmark for future control schemes for position control and trajectory tracking under the influence of environmental disturbances.

Increasing developments in the offshore energy sector have led to demand for robotics use in inspection, maintenance, and repair maintenance tasks, particularly for the service life extension of structures. These robots experience slippage due to varying surface conditions caused by environmental factors and marine growth, leading to inconsistent traction forces and potential mission failures in single-drive systems. This paper explores control strategies and mechanical configurations both in simulation and on the physical industrial robot to mitigate slippage in offshore robotic operations, improving reliability and reducing costs. This study examines mechanical and control modifications such as multi-wheel drive (MWD), PID velocity control, and a feedback-linearized slip control system with an individual wheel disturbance observer to detect surface variations. The results indicate that a 3 WD setup with slip control handles the widest range of conditions but suffers from high control effort due to chattering effects. The simulations show potential for slip control; practically, challenges arise from low sampling rates compared to traction changes. In real-world conditions, a PID-controlled MWD system, combined with increased normal force, achieves better traction and stability. The findings highlight the need for further investigation into the mechanical design and sensor feedback, with the refinement of slip control strategies and observer design for the offshore environment.