Musaed N. J. AlAwad

Prof. Dr. Musaed N. J. AlAwad

orcid

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2002 in Journal of King Saud University – Engineering Sciences
Verified
Journal Article
Open access
PDF file
Musaed N. J. AlAwadMusaed N. J. AlAwad
Musaed N. J. AlAwad
The evaluation of Mohr-Coulomb failure criterion as well as other mechanical properties for reservoir rocks is essential for well planning, development and characterization of oil and gas reservoirs. This is because the understanding of the rock-stress relationship can solve many reservoir problems and avoid cost of remedial work. For example, a Mohr-Coulomb failure criterion may be used for borehole instability analysis, water injection design, production optimization techniques, compaction and sand production prediction, etc. A Mohr-Coulomb failure criterion is a function of the apparent cohesion (τ0) and the angle of internal friction (φ). The evaluation of these two parameters requires testing of many rock samples using an expensive and time-consuming triaxial testing set-up. In this study, a correlation between the apparent cohesion and the uniaxial compressive strength was developed. It is based on laboratory data of more than 200 rock samples of different types obtained from the literature. The correlation coefficient of the developed correlation equals to 0.82. Verification of the developed correlation using data from other references has shown an average error of estimation equal to 10%. Therefore, the Mohr-Coulomb failure criterion’s parameters as well as Poisson’s ratio can be estimated using the developed correlation based on fast and cheap measurements of the uniaxial compressive strength.

31 July 2020 in Journal of King Saud University – Engineering Sciences
Verified
Journal Article
Open access
PDF file
Musaed N. J. AlAwadMusaed N. J. AlAwad
Musaed N. J. AlAwad
To achieve fast, safe and economical drilling operations through formations containing natural fractures or vugs, all fractures and vugs must be perfectly sealed using proper fractures seal materials in a process called wellbore strengthening. Wellbore strengthening may elevate the overall tensile strength of the treated formation to a value approaches the intrinsic tensile strength of unfractured rock. Numerous studies have been conducted for testing fractures seal materials suitability for wellbore strengthening application in various formations. However, there is no solid and simple theoretical explanation on how wellbore strengthening process can recover the tensile strength and hence the fracturing pressure of the treated naturally fractured formation. In this study, test specimens cored from an artificial (building) sandstone bricks were used to measure the unconfined compressive strength (UCS), Brazilian indirect tensile strength (BTS), and establishing the multi-stage triaxial compression (MS-TCS) test. Core samples from the same sandstone were previously used for wellbore strengthening studies using crushed dates palm seeds. Crushed dates palm seeds succeeded to completely stop mud losses at a pressure equal to 6.9 MPa. Data obtained from unconfined compression, multi-stage triaxial compression, Brazilian indirect tensile, and wellbore strengthening tests were collectively used to develop a clear theoretical understanding of the mechanism of tensile strength recovery caused by wellbore strengthening effect. It was found that wellbore strengthening effect in sealing natural fractures and vugs is similar to the confining pressure effect in closing the induced shear fractures in the test specimen during a multi-stage triaxial compression test. For the tested sandstone, using crushed dates palm seeds as a fracture seal material has improved wellbore strengthening from zero tensile strength (complete loss of mud circulation) to 2.56 MPa tensile strength at which there was a complete fracture seal (zero mud loss). The recovered tensile strength (2.56 MPa) is approaching the intrinsic tensile strength (BTS=2.7 MPa) of the same sandstone in its initial unfractured state.

30 May 2017 in Journal of Petroleum and Gas Engineering
Verified
Journal Article
Open access
PDF file
Musaed N. J. AlAwadMusaed N. J. AlAwad
Musaed N. J. AlAwad
Khaled ElshreefKhaled Elshreef
Khaled Elshreef
The drilling operation cost represents 25% of the total oilfield exploitation cost. Drilling fluids represent 15 to 18% of the total cost of well petroleum drilling operations. The main drilling fluids problem is the loss into fractures and vugs. Mitigation of severe lost circulation is a main challenge while drilling in fractured formations where conventional lost circulation materials (LCM) will not cure these losses. Therefore, specialized fracture seal material (FSM) is required when drilling fractured formations. In this study, a promising FSM made from shredded waste car tyres was tested at laboratory for its ability to seal artificially fractured cores under High Temperature High Pressure (HT-HP) conditions similar to wellbore conditions. For this purpose, the conventional 500 ml HT-HP filtration cell was modified to accommodate a fractured core plug of length and diameter equal to 38.1 mm (1.5 inch) instead of the ceramic disc. Moreover, the cell outlet channel located below the fractured plug was increased from 1.0 mm diameter to 5.0 mm, easily allow the passage of the FSM in none effective fracture seal tests. Using the modified HT-HP filtration cell, shredded waste car tyres proved its ability to perfectly seal the artificially made fracture in the test core samples at overbalance pressures up to 900 psi and temperatures up to 80°C. The optimum mud composition was fresh water, 7% by weight bentonite, 7% shredded waste car tyres (a mixture ranging between 2.3 mm and less than 0.45 mm granule sizes) in weight bases. In addition to its great ability to seal fractured formation, the shredded waste car tyres material is cheap and locally available in commercially quantities. Additionally, the utilization of waste car tyres in drilling operations and other industrial applications can protect the environment from many hazards. Key words: HT-HP filtration, Fracture seal, shredded waste car tyres, drilling fluid, fractured core plug.

29 May 2025 in Eng
Verified
Journal Article
Open access
PDF file
Musaed N. J. AlAwadMusaed N. J. AlAwad
Musaed N. J. AlAwad
Khaled ElshreefKhaled Elshreef
Khaled Elshreef
The aim of this study is to develop a simple and reliable laboratory testing procedure for evaluating the bond strength of cement–formation sheaths that considers cement slurry composition and contamination as well as formation strength and formation surface conditions (roughness and contamination). Additionally, a simple and practical empirical correlation is developed for predicting cement–rock bond strength based on the routine mechanical properties of hard-set cement and formation rock. Cement slurries composed of Yamama cement type 1 and 25% local Saudi sand, in addition to 40% fresh water, are used for all investigations in this study. Oil well cementing is a crucial and essential operation in the drilling and completion of oil and gas wells. Cement is used to protect casing strings, isolate zones for production purposes, and address various hole problems. To effectively perform the cementing process, the cement slurry must be carefully engineered to meet the specific requirements of the reservoir conditions. In oil well cementing, the cement sheath is a crucial component of the wellbore system, responsible for maintaining structural integrity and preventing leakage. Shear bond strength refers to the force required to initiate the movement of cement from the rock formation or movement of the steel casing pipe from the cement sheath. Cement–formation sheath bond strength is a critical issue in the field of petroleum engineering and well cementing. Cement plays a crucial role in sealing the annulus (the space between the casing and the formation) and ensuring the structural integrity of the well. The bond strength between the cement and the surrounding geological formation is key to preventing issues such as fluid migration, gas leaks, and wellbore instability. To achieve the study objectives, sandstone and sandstone–cement composite samples are tested using conventional standard mechanical tests, and the results are used to predict cement–formation sheath bond strength. The utilized tests include uniaxial compression, direct tensile, and indirect tensile (Brazilian) tests. The predicted cement–rock sheath bond strength is compared to the conventional laboratory direct cement–formation sheath strength test outcomes. The results obtained from this study show that the modified uniaxial compression test, when used to evaluate cement–formation shear bond strength using cement–rock composite samples, provides reliable predictions for cement–formation sheath bond strength with an average error of less than 5%. Therefore, modified uniaxial compression testing using cement–rock composite samples can be standardized as a practical laboratory method for evaluating cement–formation sheath bond strength. Alternatively, for a simpler and more reliable prediction of cement–formation sheath bond strength (with an average error of less than 5%), the empirical correlation developed in this study using the standard compressive strength value of hard-set cement and the standard compressive strength value of the formation rock can be employed separately. For the standardization of this methodology, more generalized research should be conducted using other types of oil well cement and formation rocks.

1 January 2001 in Journal of King Saud University – Engineering Sciences
Verified
Journal Article
Open access
PDF file
Musaed N. J. AlAwadMusaed N. J. AlAwad
Musaed N. J. AlAwad
The significance of permeability sensitivity to changes in pore pressure (i.e., to change in effective overburden stress) has been examined by modifying Darcy law for radial single-phase steady state flow. The elaborate model accounts for pore pressure drop and permeability reduction due to reservoir compaction. Three Saudi oil reservoir rock samples as well as Berea sandstone were tested for their physical properties. All of these cores were free of microfractures. Furthermore, using 1% NaCl aqueous solution, relationship between the overburden pressure and absolute permeability of these samples were determined at several levels of confining pressure at which the permeability was calculated. These tests were performed to establish the effect of reservoir depressurization on reservoir rock permeability. The experimental work performed in this study showed that reservoir rocks of high initial porosity and permeability are highly affected by reservoir (pore) pressure drop and resulting increase in the effective stress. For example, the production rate from sandstone sample N3 decreased 25% of its initial value when the pore pressure decreased by 25% of its initial value, whereas the production rate from carbonate sample N4 decreased 8% for the same pore pressure decrease. Moreover, it was observed that the reservoir rock permeability under in-situ conditions strongly depends on its initial porosity and permeability values. This study suggests that a severe error in productivity predictions can result on assuming that the formation permeability at depth is independent of the effective stress. Because the increase in the effective stress decreases porosity which, in turn, changes permeability.

19 May 2026 in Processes
Verified
Journal Article
Open access
PDF file
AAAhmed Sabbar Alhalboosi
Ahmed Sabbar Alhalboosi
Musaed N. J. AlAwadMusaed N. J. AlAwad
Musaed N. J. AlAwad
FAFAISAL ALTAWATI
FAISAL ALTAWATI
MKMohammad A. Khamis
Mohammad A. Khamis
MAMohammad A. Almobarky
Mohammad A. Almobarky
Accurate prediction of Rate of Penetration (ROP) in carbonate formations remains constrained by the arbitrary selection of geomechanical input parameters in empirical drilling models. This study presents the first systematic field-based evaluation of sixteen geomechanical properties—grouped into three categories: strength parameters (uniaxial compressive strength (UCS), confined compressive strength (CCS), shear strength, thick-walled cylinder strength (TWC), friction angle, and cohesion), elastic moduli (Young’s modulus, shear modulus, bulk modulus, bulk compressibility, dynamic combined modulus (DCM), Poisson’s ratio, brittleness index), and in situ stress parameters (overburden pressure, minimum, and maximum horizontal stresses)—to identify optimal predictors for ROP modeling across PDC bit sizes of 12.25″ and 8.5″. Continuous wireline log data from two vertical carbonate wells in the Middle East (Well A: 1000–3370 m; Well B: 1945 to 3128 m; total intervals of 2370 m and 1183 m, respectively) penetrating formations comprising limestone, dolomite, sandstone, shale, anhydrite, and marly limestone were used. All sixteen geomechanical properties were computed using Interactive Petrophysics (IP) software with lithology-specific empirical correlations and validated against laboratory core measurements (R2 = 0.79–0.95). Pearson and Spearman correlation analyses quantified parameter–ROP relationships, and the Al-Abduljabbar empirical model, recalibrated via multiple nonlinear regression, served as the evaluation framework. DCM consistently exhibited the strongest negative correlation with ROP across both bit sizes and achieved the highest model accuracy (R2 = 0.54, AAPE = 25.33%), significantly outperforming the Bourgoyne and Young model (R2 = 0.26, AAPE = 36.55%). A statistically validated scale-dependent effect was identified: Fisher’s Z-transformation tests confirmed that the correlation reversal between CCS and UCS across bit sizes is statistically significant (CCS: Z = −16.84, p < 0.001; UCS: Z = −6.75, p < 0.001), establishing CCS as the superior predictor at 12.25″ and UCS as the superior predictor at 8.5″—a finding not previously reported in the ROP literature. This reversal is attributed to the larger contact area of the 12.25″ bit, which promotes confinement-dominated rock failure better described by CCS, whereas the smaller bit produces localized stress concentration better represented by UCS. These results establish that (1) optimal geomechanical input selection is bit-size dependent, (2) nonlinear modeling outperforms linear frameworks for strength–ROP relationships, and (3) parameter relevance outweighs coefficient tuning in model robustness. DCM is recommended as the most operationally practical universal input, requiring only conventional compressional sonic and density logs. This study provides a systematic framework for geomechanical parameter selection with direct implications for drilling optimization in heterogeneous carbonate reservoirs.