In the present work, moisture absorption of an original expanded Epoxy/dicyandiamide solid formulation designed for the automotive industry was studied. The first part of work focuses on the bulk of cured adhesive joints, according to the water absorption under hydrothermal aging. Aging in immersion in distilled water at 40°C, associated to gravimetric, InfraRed, and optical microscope analyses, enables to estimate the coefficient of diffusion of the formulation in the considered conditions and structural modifications induced by the aging. The studied formulation is stable during the aging, as the structural adhesive network does not degrade, even after 1500 h of immersion. The lixiviation of some compounds of the formulation eventually occurs. The water uptake is always reversible and does not strongly impact the integrity of the joint, even in the case of a fully expanded adhesive joint. The hygrothermal aging enables to define three distinct diffusion domains, and to estimate the coefficient of diffusion of the adhesive joint. Results obtained in this study can be used to estimate the durability of a metal/adhesive interface in hygrothermal aging conditions. As the expanded adhesive joint does not seem to be degraded during the aging, the integrity of the joint is supposed to essentially depend on the durability of the interface and the corrosion of the metal substrate.
This study focuses first on the synthesis through an aza-Michael addition reaction of original linear diamine prepolymers and original amine/acrylate thermoset adhesives, and second on their thermal, mechanical and adhesion characterization. The major advantage of the aza-Michael addition reaction is that it takes place at room temperature, without a solvent and without a catalyst. Using the aza-Michael addition reaction, linear secondary diamine prepolymers were first synthesized with a control of the molecular weight, ranging from 867 to 1882 g mol−1. Then, aza-Michael reactions of diamine prepolymers with three different acrylates allowed the synthesis of new amine/acrylate thermoset adhesives. All the thermoset adhesives were characterized by rheology and thermal analysis, leading, once the crosslinking aza-Michael reaction had occurred, to soft thermoset networks with glass transition temperatures ranging from −23 to −8 °C, gel point times ranging from 40 min to 4 h, and a polar component of the surface energy ranging from 3 to 17 mJ m−2. Functionality of the acrylates directly influences the crosslinking rate, and a decreasing master curve is obtained when reporting crosslinking rate versus gel point time. Crosslinking density is controlled by the diamine prepolymer chain length. In a second step, thermoset adhesives were applied as thin films between two galvanized steel plates, and adhesion properties were evaluated through a lap-shear test. Results showed that the adhesive strength increases as the dynamic viscosity and molecular weight of the diamines prepolymer increases. Increasing the diamines prepolymer chain length results in an increase in strain at break, a decrease in the shear modulus, and a decrease in the maximum lap-shear strength. It is also observed that the adhesive strength decreases when the adhesive film thickness increases. Moreover, thermoset adhesives with high polarity and a surface energy similar to the surface energy of the substrate will favor high adhesion and a better adhesive strength of the assembly. Lastly, the nature of the acrylates and diamines prepolymer chain length allow tuning a wide range of adhesive strength and toughness of these original soft thermoset adhesives.
Les matériaux polymères ont connu un essor considérable dans le milieu du bâtiment depuis de nombreuses années, du fait d'un large panel de propriétés. Ces matériaux sont cependant très sensibles à la température et peuvent être facilement inflammables, permettant le développement d'un incendie. Du fait de la mise en place de normes de plus en plus strictes, relatives à la sécurité vis-à-vis d'un feu, il est nécessaire de mettre au point des systèmes retardateurs de flamme de plus en plus performants.Le premier objectif de la thèse est d'étudier les mécanismes retardateurs de flamme de composites EVA/ATH, et en particulier l'effet barrière. La notion de compacité de la couche de particules a pu être mise en évidence via l'essai de compression oedométrique. La mesure de la résistance à la compression d'une poudre, ou d'un mélange, permet d'estimer l'efficacité de l'effet barrière dans le cas de composites EVA/ATH.Le second objectif s'est concentré sur la caractérisation de nouvelles charges pouvant améliorer le comportement au feu de l'EVA. Dans un premier temps, de la diatomite a été introduite, jouant le rôle d'agent de synergie avec l'ATH. Dans un second temps, de la colémanite et des fondants broyés ont été introduits afin d’améliorer la cohésion de la couche barrière et du résidu de combustion par vitrification. La colémanite s’est révélée être un retardateur de flamme efficace, du fait de la libération d’eau de façon endothermique, et d’une vitrification à haute température. Dispersés dans la masse, les fondants perturbent la formation de la couche barrière du fait de la coagulation des particules. En tant que couche supérieure d’un système coeur-peau, le fondant vitrifie lors du refroidissement de l’échantillon, assurant la cohésion du résidu, ainsi qu’un rôle de suppresseur de fumées.Finalement, le dernier objectif de la thèse est de traiter des ATH, afin d’améliorer les propriétés mécaniques et retardatrices de flamme de l’EVA. Des molécules de greffage ont été réalisées à partir de MAPC1. La présence d’un copolymère p(MMA-co-MAPC1(OH)2) à la surface des particules homogénéise la dispersion de l’ATH dans la matrice EVA, améliorant les propriétés d’allongement à la rupture du composite. Un homopolymère p(MAPC1(OH)2) permet également d’améliorer la dispersion et l’allongement à la rupture. De plus, les groupements phosphorés présents le long de la chaîne semblent capables d’agir en phase condensée en tant que promoteur de charbonnement, ainsi qu’en phase gazeuse par le biais de radicaux réactifs.
The present work focuses on a characterization method using optical microscopy to follow the swelling of expanded adhesive formulations. The original aspect of the method consists of incorporating a heating plate into the optical microscope in order to apply a curing process to the adhesive and to directly observe its expansion between two glass plates with a defined gap. Different heating rates and curing temperatures were applied to observe the influence on the expansion process, characterized by the time needed to fill the gap between the glass plates, the homogeneity and quality of the contact on the upper plate and the stability of the adhesion. Bisphenol A diglycidyl ether/dicyandiamide adhesive formulations were particularly considered in this study. Adhesives were also analyzed by DSC to clearly define the curing process in function of the heating rate and curing temperature. The expansion process presented in this work implies the use of a physical expansion agent to validate the analytical method. Their expansion was also studied under an optical microscope to define a blowing profile matching the curing process of the epoxy-amine adhesive. Results showed that the synchronization between the expansion and the curing of the adhesive could be followed and analyzed qualitatively by the proposed method and could be applied to various expanded formulations.