Pixel-based (PB) and geographic-object-based (GEOBIA) classification approaches allow the extraction of different objects from multispectral images (MS). The primary goal of this research was the analysis of UAV imagery applicability and accuracy assessment of MLC and SVM classification algorithms within PB and GEOBIA classification approaches. The secondary goal was to use different accuracy assessment metrics to determine which of the two tested classification algorithms (SVM and MLC) most reliably distinguishes olive tree crowns and which approach is more accurate (PB or GEOBIA). The third goal was to add false polygon samples for Correctness (COR), Completeness (COM) and Overall Quality (OQ) metrics and use them to calculate the Total Accuracy (TA). The methodology can be divided into six steps, from data acquisition to selection of the best classification algorithm after accuracy assessment. High-quality DOP (digital orthophoto) and UAV_MS were generated. A new accuracy metric, called Total Accuracy (TA), combined both false and true positive polygon samples, thus providing a more comprehensive insight into the assessed classification accuracy. The SVM (GEOBIA) was the most reliable classification algorithm for extracting olive tree crowns from UAV_MS imagery. The assessment carried out indicated that application of GEOBIA-SVM achieved a TA_COR of 0.527, TA_COM of 0.811, TA_OQ of 0.745, Overall Accuracy (OA) of 0.926 or 0.980 and Area Under Curve (AUC) value of 0.904 or 0.929. The calculated accuracy metrics confirmed that the GEOBIA approach (SVM and MLC) achieved more accurate olive tree crown extraction than the PB approach (SVM and MLC) if applied to classifying VHR UAV_MS imagery. The SVM classification algorithm extracted olive tree crowns more accurately than MLC in both approaches. However, the accuracy assessment has proven that PB classification algorithms can also achieve satisfactory accuracy.

While SoilGrids is an important source of soil property data for a wide range of environmental studies worldwide, there is currently an extreme lack of studies evaluating its accuracy against independent ground truth soil sampling data. This study aimed to provide a comprehensive insight into the accuracy of SoilGrids layers for three physical soil properties representing soil texture components (clay, silt, and sand soil contents) using ground truth data in the heterogeneous landscape of Croatia. These ground truth data consisted of 686 soil samples collected within the national project at a 0–30 cm soil depth, representing the most recent official national data available. The main specificity of this study was that SoilGrids was created based on zero soil samples in the study area, according to the ISRIC WoSIS Soil Profile Database, which is very sparse for the wider surroundings of the study area. The accuracy assessment metrics indicated an overall low accuracy of the SoilGrids data compared with the ground truth data in Croatia, with the average coefficient of determination (R²) ranging from 0.039 for silt and sand to 0.267 for clay, while the normalized root-mean-square error (NRMSE) ranged from 0.362 to 2.553. Despite the great value of SoilGrids in a vast range of environmental studies, this study proved that the accuracy of its products is highly dependent on the presence of ground truth data in the study area.

The accurate extraction of a coastline is necessary for various studies of coastal processes, as well as for the management and protection of coastal areas. Very high-resolution satellite imagery has great potential for coastline extraction; however, noises in spectral data can cause significant errors. Here, we present a newly developed Coastal Extraction Tool (CET) that overcomes such errors and allows accurate and time-efficient automated coastline extraction based on a combination of WorldView-2 (WV-2) multispectral imagery and stereo-pair-derived digital surface model (DSM). Coastline extraction is performed and tested on the Iž-Rava island group, situated within the Northern Dalmatian archipelago (Croatia). Extracted coastlines were compared to (a) coastlines extracted from state topographic map (1:25,000), and (b) coastline extracted by another available tool. The accuracy of the extracted coastline was validated with centimeter accuracy reference data acquired using a UAV system (Matrice 600 Pro + MicaSense RedEdge-MX). Within the study area, two small islets were detected that have not been mapped during the earlier coastline mapping efforts. CET proved to be a highly accurate coastline mapping technique that successfully overcomes spectral-induced errors. In future research, we are planning to integrate data obtained by UAVs infrared thermography (IRT) and in situ sensors, measuring sea and land surface temperatures (SST and LST), into the CET, given that this has shown promising results. Considering its accuracy and ease of use, we suggest that CET can be applied for automated coastline extraction in other large and indented coastal areas. Additionally, we suggest that CET could be applied in longitudinal geomorphological coastal erosion studies for the automated detection of spatio-temporal coastline displacement.

Multibeam echosounders (MBES) have become a valuable tool for underwater floor mapping. However, MBES data are often loaded with different measurement errors. This study presents a new user-friendly and methodological semi-automatic approach of point cloud post-processing error removal. The St. Anthony Channel (Croatia) was selected as the research area because it is regarded as one of the most demanding sea or river passages in the world and it is protected as a significant landscape by the Šibenik-Knin County. The two main objectives of this study, conducted within the Interreg Italy–Croatia PEPSEA project, were to: (a) propose a methodological framework that would enable the easier and user-friendly identification and removal of the errors in MBES data; (b) create a high-resolution integral model (MBES and UAV data) of the St. Anthony Channel for maritime safety and tourism promotion purposes. A hydrographic survey of the channel was carried out using WASSP S3 MBES while UAV photogrammetry was performed using Matrice 210 RTK V2. The proposed semi-automatic post-processing of the MBES acquired point cloud was completed in the Open Source CloudCompare software following five steps in which various point filtering methods were used. The reduction percentage in points after the denoising process was 14.11%. Our results provided: (a) a new user-friendly methodological framework for MBES point filtering; (b) a detailed bathymetric map of the St. Anthony Channel with a spatial resolution of 50 cm; and (c) the first integral (MBES and UAV) high-resolution model of the St. Anthony Channel. The generated models can primarily be used for maritime safety and tourism promotion purposes. In future research, ground-truthing methods (e.g., ROVs) will be used to validate the generated models.

In recent decades, precision agriculture and geospatial technologies have made it possible to ensure sustainability in an olive-growing sector. The main goal of this study is the extraction of olive tree canopies by comparing two approaches, the first of which is related to geographic object-based analysis (GEOBIA), while the second one is based on the use of vegetation indices (VIs). The research area is a micro-location within the Lun olives garden, on the island of Pag. The unmanned aerial vehicle (UAV) with a multispectral (MS) sensor was used for generating a very high-resolution (VHR) UAV_MS model, while another mission was performed to create a VHR digital orthophoto (DOP). When implementing the GEOBIA approach in the extraction of the olive canopy, user-defined parameters and classification algorithms support vector machine (SVM), maximum likelihood classifier (MLC), and random trees classifier (RTC) were evaluated. The RTC algorithm achieved the highest overall accuracy (OA) of 0.7565 and kappa coefficient (KC) of 0.4615. The second approach included five different VIs models (NDVI, NDRE, GNDVI, MCARI2, and RDVI2) which are optimized using the proposed VITO (VI Threshold Optimizer) tool. The NDRE index model was selected as the most accurate one, according to the ROC accuracy measure with a result of 0.888 for the area under curve (AUC).