Collaborative robots (Cobots) are compact machines programmable for a wide variety of tasks and able to ease operators’ working conditions. They can be therefore adopted in small and medium enterprises, characterized by small production batches and a multitude of different and complex tasks. To develop an actual collaborative application, a suitable task design and a suitable interaction strategy between human and cobot are required. The achievement of an effective and efficient communication strategy between human and cobot is one of the milestones of collaborative approaches, which can be based on several communication technologies, possibly in a multimodal way. In this work, we focus on a cooperative assembly task. A brain–computer interface (BCI) is exploited to supply commands to the cobot, to allow the operator the possibility to switch, with the desired timing, between independent and cooperative modality of assistance. The two kinds of control can be activated based on the brain commands gathered when the operator looks at two blinking screens corresponding to different commands, so that the operator does not need to have his hands free to give command messages to the cobot, and the assembly process can be sped up. The feasibility of the proposed approach is validated by developing and testing the interaction in an assembly application. Cycle times for the same assembling task, carried out with and without the cobot support, are compared in terms of average times, variability and learning trends. The usability and effectiveness of the proposed interaction strategy are therefore evaluated, to assess the advantages of the proposed solution in an actual industrial environment.
1
14 December 2023 in Journal of Intelligent Manufacturing
In the recent years, the industry has seen the introduction of the collaborative robots (or “cobots”), designed to interact with human workers in a shared environment. However, the involvement of the cobots in industrial applications is still strongly influenced by the strategies for non-collaborative robotic cells. The researchers are working frantically to find solutions to improve the interactions between the cobot and the operator, simplifying the communication and the programming work. This paper proposes a task-based algorithm which allows a fluid interaction, via biosignals of a Brain Compute Interface (BCI), as an enabling strategy of the collaborative workstations. The goal is to provide an implementation method of the BCI devices for industrial applications in order to make the cobots easy to use and interact with. The proposed solution is tested on an experimental setup which uses the Steady-State Visual Evoked Potential (SSVEP) response signal to drive machine commands to a collaborative robotic arm.
Additive Manufacturing (AM) is a class of processes with a remarkable growth and evolution during the last years. Those allow to fabricate components deposing a great variety of raw materials with a layer by layer approach. Conventional material deposition strategy is identified by the slicing process layering the 3D component with planes. Although convention slicing enables common Cartesian 3D-printers, is constraining the fabrication of near-net shape components featuring overhangs and particularly to free-form geometries without the use of dedicated supports. Conventional slicing is also limiting industrial 6-axis robots which are more flexible, providing larger working area and introducing more degrees of freedom than Cartesian 3D-printers. Non-planar slicing unlocks such features changing deposition direction according to multi-directional surface. On the other hand, non-planar slicing generalization is a challenging problem due to its own intrinsic complexity. Hence, the goal to achieve a flexible non-planar slicer software is still not reached. This work considers a quarter of torus as representative of a free-form part which only the external surface is known analytically. The aim of this work is to provide a new method to define a non-planar infill to fabricate filled-solid parts starting from the data on the contour. It is a first and preparatory step of problem generalization. An experimental activity is pursued showing the non-planar infill strategy introduced. The printed results are discussed and evaluated, underlining the capabilities of the proposed solution.
Purpose: This study aims to investigate and compare three nonplanar (NP) slicing algorithms. The algorithms aim to control the layer thickness variation (LTV), which is a common issue in supportless fabrication of free-form parts. The comparison underlines the differences between theoretical and real scenarios, resulting in guidelines for toolpath generation of complex objects. Design/methodology/approach: The algorithm comparison uses a representative complex geometry, i.e. the quarter of torus. It presents an increasing overhang and constant curvature. It is represented using a parametric definition in the first two algorithms and by triangular meshes as the real scenario. The algorithms work on the contouring stage, whereas a B-spline approach is used to build the inner side of layers. Constant layer thickness (LT) is imposed, and an adaptive approach is adopted to avoid over-extrusion. Three algorithms are validated with a robotized fused deposition modeling system. LTs are measured on cross-sectioned samples and compared with the theoretical cases. Findings: The results show that two algorithms can provide an LTV of about 0% on the contour. Nevertheless, the theoretical results on the inner side are divergent from the previous evidence, moving on to higher LTV (approximately 90%). The need for an adaptive approach is demonstrated, resulting in an LTV reduction (approximately 30%). Printed parts present the same trends of theoretical results confirming the algorithms’ capabilities. Originality/value: The work shows, for the first time, a comparison between NP slicing techniques. The LTV problem in hollow and filled components is analyzed through theoretical and experimental evidence. The results are promising for supportless fabrication of free-form parts.
Additive manufacturing (AM) is a family of manufacturing processes suitable for rapid prototyping and building near-net-shape components. AM mainly relies on the 2D-slicing process, which does not perform well for free-form shapes, causing the need for support structures, staircase defects, and anisotropy. To address these challenges, several works have been done on Non-planar (NP) slicing techniques to improve flexibility and fabrication performances. While existing work primarily focuses on thin-walled geometries and conformal printing, the issue of filled fabrication with inner cavities remains partially unaddressed. In this context, this work specifically tackles NP-slicing for overhanging components with internal features (such as inner cavities). Our method uses a volumetric mesh (based on tetrahedral elements) and leverages the geodesic field to minimize layer thickness variations, aiming to reduce anisotropy. Although this work is exploratory, it shows the method’s feasibility through the robotic toolpaths’ simulations.