In this paper, we introduce our vision for the future non-terrestrial networks beyond 5G and discuss the possible implementation scenarios for free-space optical communication technology in it, especially regarding the satellite communications segment. We show and discuss some of the latest system developments globally in the field of optical communications for small satellites. Together with the latest projects in the National Institute of Information and Communications Technology (NICT) of Japan for payloads for small moving platforms, a specific trend in the field is clearly defined. We further show our newly developed ground station for the experiments with our High-speed Communication with Advanced Laser Instrument (HICALI) payload and discuss the main challenges in a satellite to ground optical link and our specific solution providing preliminary test results of the performance.
Line-of-sight laser communication application scenarios are numerous including land, mobile, maritime, airborne and space platforms for conventional and tactical utilization. However, beam pointing and stabilization are complicated in dynamic systems such as orbiting satellite to ground receiver, drones, aircrafts and metropolitan free-space optical links vulnerable to natural and artificial disturbances. Small Satellite platforms such as CubeSats are even more challenging due to their limited size and on-board resources. This paper presents an experimental study on a feedback photodiode array sensor assisted control of a one-axis micro-electromechanical (MEMS) fine steering mirror stabilizing a laser communication link on an optical bench in the laboratory. Disturbance profiles similar to vibrations on dynamic platforms are induced into the setup using an electrodynamic vibration machine to test the efficacy of the MEMS fine steering control mechanism. The Photodiode Array (PDA) sensor collocated with an Avalanche Photodiode at the receiving section provides sustained information about the transmitter’s movements and beam displacements while the received optical signal strength is continuously monitored. The feedback signals are transmitted to the FSM controller via a radio link. We demonstrate the capacity to stabilize a laser beam transmission in the presence of external disturbances and platform movements using a PDA sensor assisted control.
The Japanese National Institute of Information and Communications Technology (NICT) is currently developing a high-performance laser-communication terminal for CubeSats aimed at providing a high-datarate communication solution for LEO satellites requiring transmission of large volumes of data from orbit. A key aspect of the communication system is a high-power optical amplifier capable of providing enough gain to the transmitted signals to be able to close the link on its counterpart’s receiver with the smallest impact in terms of energy and power on the CubeSat’s platform. This manuscript describes the development of a miniaturized 2-W space-grade 2-stage erbium-doped fiber amplifier (EDFA) compatible with the CubeSat form factor, showing the best power-to-size ratio for a space-qualified EDFA to the best of the authors’ knowledge. Performance results under realistic conditions as well as full space qualification and test are presented, proving that this module can support short-duration LEO-ground downlinks as well as long-duration intersatellite links.
Adaption of laser communication terminals to airborne and lean-satellite platforms is now a vogue, made possible due to the progressing advancements in lightweight components and compactness of onboard electro-optical transceivers and control systems. This enables highly secured and superior data-transmission rates beyond multiple Gigabit/second on CubeSats and drones compared to Megabit/second rates offered by similar radio-transceivers form factors. However, laser-transmission links require a very stringent beam-pointing stability because they are easily perturbed by attitude variations and micro-vibrations generated by the host platform’s propulsion system or other mechanically active subsystems in proximity with the transmitter’s optical head. Severe line-of-sight jitter causes the downlink laser beam to drift from the targeted receiving system’s field-of-view, inducing pointing errors, increasing signal outage probability and information loss. We experimentally examine the platform jitter generated by the propellers of an hexacopter drone during ground operation and the attitude-control unit’s reaction wheels in a 6U CubeSat structure. We determined the vibration spectrum unique to these platforms and accordingly prescribe requirements for applicable optical fine pointing and disturbance isolation or suppression systems needed to achieve a high-fidelity laser-communication link.
We present concept design of an innovative, compact, non-mechanical optical beam steering antenna with a liquid crystal beam shaper optimized for lean platforms. Laser communication terminals in air and space-borne platforms must fulfil the low-SWaP (size, weight, and power) design philosophy which is often a challenging task when utilizing mechanical steerers like prisms, MEMS fast steering mirrors, lenslet arrays, gimbal movers etc. We introduce the approach of a compact photonics integrated circuit consisting of power division network, optical phase array antennas and liquid crystal on silicon structure to form a laser transmitting module for a CubeSat. An Erbium Doped Fiber Amplifier provide adequate optical power output that can facilitate a baseline free-space communication link margin at 1550nm. The design parameters were tuned to achieve to minimal divergence and adequate beam steering angle, higher EIRP, high beam switching speed and tolerance of space environmental conditions. Applications are numerous and not limited to optical communication terminals on drones, aircrafts, and satellites; automotive LiDAR systems, medical and scientific instrumentation devices are also promising areas of rapid adoption and integration.