The hot spot effect is an important factor that affects the power generation performance and service life in the power generation process. To solve the problems of low detection efficiency, low accuracy, and difficulty of distributed hot spot detection, a hot spot detection method using a photovoltaic module based on the distributed fiber Bragg grating (FBG) sensor is proposed. The FBG sensor array was pasted on the surface of the photovoltaic panel, and the drift of the FBG reflected wavelength was demodulated by the tunable laser method, wavelength division multiplexing technology, and peak seeking algorithm. The experimental results show that the proposed method can detect the temperature of the photovoltaic panel in real time and can identify and locate the hot spot effect of the photovoltaic cell. Under the condition of no wind or light wind, the wave number and variation rule of photovoltaic module temperature value, environmental temperature value, and solar radiation power value were basically consistent. When the solar radiation power fluctuated, the fluctuation of hot spot cell temperature was greater than that of the normal photovoltaic cell. As the solar radiation power decreased to a certain value, the temperatures of all photovoltaic cells tended to be similar.
Studying the temperature field of photovoltaic modules is important for improving their power generation efficiency. To solve the problem of traditional sensors being unsuitable for measuring the spatial temperature field, we designed a real-time detection scheme of the photovoltaic module temperature field based on a fiber Bragg grating (FBG) sensor array. In this scheme, wavelength division multiplexing and space division multiplexing technologies were applied. The multi-channel FBG sensor strings were arranged on the surface and in the near field of the photovoltaic module. Different FBG strings were selected through optical switches, and the wavelength of the FBG string was addressed and demodulated using the tunable laser method and a peak-seeking algorithm. A measurement experiment of the photovoltaic module temperature field was carried out in an outdoor environment. The experimental results showed that the fluctuation law of the photovoltaic module surface and near-field temperature is basically consistent with that of solar radiation power. The temperature of the photovoltaic module decayed from the surface to space. Within 6 mm of the photovoltaic module surface, the temperature sharply dropped, and then the downward trend became flat. The lower the solar radiation power and the higher the wind speed, the faster the temperature decay. This method provides technical support for measuring the temperature field of a photovoltaic module and other heat source equipment.
To solve the problems of low detection efficiency and inability to adapt to distributed measurement in traditional detection methods, a water temperature field detection system based on a fiber Bragg grating string was designed. In this system, six fiber Bragg gratings with different center wavelengths are connected in series on a single fiber optic cable based on wavelength division multiplexing technology. The fiber Bragg grating string is encapsulated in stainless steel tube and vertically fixed in the measured water body of the fish pond. The space division multiplexing technology is employed to collect information from multiple fiber Bragg grating strings. Water temperature measurement experiments were conducted in the summer pond environment. The experimental results show that the daily variation curve of temperature in each water layer of the fish pond is relatively smooth and approximates a cosine function with a 24-hour period. In summer, the daily average water temperature in the pond is no more than 1°C higher than the average air temperature. The difference between the maximum and the minimum water temperature is approximately 2°C. During the daytime, the temperature gradually decreases from the surface to the deeper water layers, whereas at night, the temperature variation among the water layers is minimal. As depth increases, the amplitude of the water temperature curve oscillations gradually decreases, exhibiting exponential decay. However, the peak time gradually lags behind. There is a correlation between the temperatures of the water layers in the fish pond, and the smaller the distance between the water layers, the stronger the correlation. The experimental results obtained in this study are highly significant for real-time services in aquatic planting and aquaculture. Additionally, this measurement method can provide valuable reference and guidance for measuring temperature fields in other fluids.
Studying the soil temperature field and its variation law is of great significance to the real-time service of agricultural production. To solve the problems of low detection efficiency and difficulty of distributed detection, a distributed detection method of soil temperature field using wavelength division multiplexing and space division multiplexing technologies based on fiber Bragg grating (FBG) sensor is proposed. In this scheme, the stainless steel tube encapsulating the FBG string was vertically buried in the measured soil, and the tunable laser method and the peak-seeking algorithm were used to demodulate the wavelength of each sensor of the FBG string. The soil temperature field measurement experiments were carried out in the farmland environment. The experimental results show that the proposed method can detect the soil temperature field in real time. The internal temperature of soil changes periodically with the periodic change of surface environment temperature. With the increase of depth, the influence of surface temperature on soil temperature gradually decreases, and the amplitude of soil temperature oscillation gradually decreases, but the hysteresis effect of temperature peak becomes more and more obvious. The ambient wind speed can reduce the temperature of soil surface and shallow layer. Soil moisture affects the speed of temperature transfer from the surface layer to the deep layers, and the hysteresis effect of temperature peak is more significant in the soil with higher moisture. Solar radiation has a great influence on the temperature of soil surface and shallow layer.