German Aerospace Center (DLR), Institute of Communications and Navigation, Department of Nautical Systems, Neustrelitz, Mecklenburg-Western Pomerania, Germany
Mr. Filippo Giacomo Rizzi
German Aerospace Center (DLR), Institute of Communications and Navigation, Department of Nautical Systems, Neustrelitz, Mecklenburg-Western Pomerania, Germany
Advanced driver-assistance system (ADAS) and high levels of autonomy for vehicular applications require reliable and high precision pose information for their functioning. Pose estimation comprises solving the localization and orientation problems for a rigid body in a three-dimensional space. In outdoor scenarios, the fusion of Global Navigation Satellite Systems (GNSS) and inertial data in high-end receivers constitutes the baseline for ground truth localization solutions, such as Real-Time Kinematic (RTK) or Precise Point Positioning (PPP). These techniques present two main disadvantages, namely the inability to provide absolute orientation information and the lack of observations redundancy in urban scenarios. This paper presents Array PPP-RTK, a recursive three-dimensional pose estimation technique which fuses inertial and multi-antenna GNSS measurements to provide centimeters and sub-degree precision for positioning and attitude estimates, respectively. The core filter is based on adapting the well-known Extended Kalman Filter (EKF), such that it deals with parameters belonging to the SO(3) and GNSS integer ambiguity groups. The Array PPP-RTK observational model is also derived, based on the combination of carrier phase measurements over multiple antennas along with State Space Representation (SSR) GNSS corrections. The performance assessment is based on the real data collected on an inland waterway scenario. The results demonstrate that a high precision solution is available 99.5% of the time, with a horizontal precision of around 6 cm and heading precision of 0.9 degrees. Despite the satellite occlusion after bridge passing, it is shown that Array PPP-RTK recovers high accurate estimates in less than ten seconds.
Global Navigation Satellite Systems (GNSS) are the primary source of position, navigation and timing (PNT) information in the maritime domain. Nevertheless, there is a pressing need for alternative absolute position information to serve as a backup when GNSS is not trustworthy or usable. One possible alternative navigation system is the terrestrial Ranging Mode, also known as the R-Mode. It reuses medium frequency (MF) radio beacons and base stations of the very high frequency data exchange system (VDES) for the transmission of synchronised signals in the service areas of those stations. A large-scale R-Mode testbed is available in the southern Baltic Sea with eight MF radio beacons transmitting R-Mode signals. These signals suffer the self-interference generated by the reflection of the radio wave from the ionosphere at night. The reflected signal, known as the sky wave in the literature, is a form of multipath, which decreases the accuracy of the system. In our work, we present the analysis of measurements obtained with the research vessel Deneb. The horizontal accuracy achieved in the optimal condition was 15.1 m (95%), whereas under the sky wave, the accuracy decreased to 55.3 m. The results are a starting point for the further development of the MF R-Mode system.
Time delays caused by ground wave propagation are the primary source of systematic error limiting the performance of the medium-frequency R-Mode radionavigation system. To achieve the desired ranging accuracy and compensate these delays, we have conceived a comprehensive correction scheme based on the prediction and application of the Atmospheric and Ground wave Delay Factor (AGDF). The AGDF was computed and mapped in 2D for a number of MF R-Mode transmitters in the Baltic Sea that were embedded into the receiver and evaluated during a large-scale measurement campaign. Our results show that the proposed AGDF approach is valid for the MF R-Mode system and provides accurate corrections of ground wave propagation delays within the performance requirements.
5 December 2022 in WMU Journal of Maritime Affairs
Nowadays, the maritime sector strongly relies on global navigation satellite systems (GNSS) for the provision of position, navigation, and timing (PNT) information. The standard functionality of several ships’ bridge instruments depends on such information, which becomes critical to have a safe and reliable navigation. Nevertheless, the possibility of GNSS outages combined with unintentional and intentional interference to GNSS signals, which have been increasing over the last years, can severely threaten the nominal activity of the crew onboard of vessels. For these reasons, alternative position, navigation, and timing (APNT) systems become fundamental in order to provide operational continuity. R(anging)-Mode is a terrestrial alternative system to GNSS for the maritime domain. In one of its possible implementation, it exploits synchronized medium frequency (MF) signals transmitted by maritime radio beacons. In the MF band, the radio waves are attenuated and distorted by the change of electrical properties of the ground along the propagation path. Moreover, these signals are affected by terrain elevation changes and large metallic infrastructures which induce an overall loss in the accuracy of the system. In this paper, we propose a mitigation technique based on the estimation of these additional error sources by using in-field range measurements. The theoretical details are explained in depth and the technique is validated with real data gathered on a measurement campaign. A clear and significant performance improvement is achieved on the range accuracy when the proposed approach is applied.
The reliance on global navigation satellite systems (GNSS) for modern vessel poses a critical point of failure. GNSS is vulnerable to jamming, spoofing, and other threats that can increase the risk of accidents. In response, alternative sources of navigational information are being sought. R-Mode offers a promising solution by leveraging terrestrial infrastructure to provide PNT data independently of GNSS. A minimum of three stations in view is needed to obtain a position and timing information. While a single R-Mode station in view cannot provide independent positioning, the received data can still be used to validate a GNSS solutions and detect threats like spoofing or outages. In this study, we introduce a novel approach to validate GNSS positions using R-Mode ranging information from a single station by combining the expected accuracy of the measurements with the geometrical relationship between the GNSS solution and the known R-Mode transmitter location. Our method was tested with real measurements in post-processing, where simulated spoofing events were introduced to mimic real-world scenarios. During these events, the GNSS solution deviated by approximately 100 m from original position. Our technique successfully detected the spoofing instances and raised warnings to increase the awareness of GNSS-based navigation threats.
Assessing the quality of a received signal is of fundamental importance to predict the performance of the receiver. In general, the signal to noise ratio (SNR) or the carrier to noise density ratio is used as an indicator to describe the signal quality of most receivers. For the medium-frequency (MF) R-Mode, a terrestrial positioning navigation and timing (PNT) system, the knowledge of the SNR or is important for monitoring purposes, helping the service operator to assess the healthiness of the transmitted signals, as well as for the users to optimize the receiver algorithms and performance. In this paper, we present how the can be estimated from the output of the discrete Fourier transform (DFT). The DFT is already used in the receiver to perform the phase estimation; hence, the receiver computational load is reduced. Theory is first presented and discussed, followed by the definition of the estimator, which is tested with Monte Carlo simulation as well as with real data to validate the approach. The results show good agreement between theory, simulation, and in-field measurements, which proves that the estimated is a good indicator to measure the received signal quality under optimal propagation condition.