In the hybrid energy storage system of electric vehicles, the main objective is to guarantee the DC bus voltage tracks the desired set point quickly and accurately. However, it is typically difficult for existing methods to provide both short settling time and small overshoot, which results in significant DC bus voltage fluctuations. To address this issue, in this paper, we propose a predictive set point modulation based energy management control strategy. A lead compensator based predictive set point modulation method is designed and integrated in the voltage control loop to improve the response speed. Theoretical analysis is carried out for the energy management system, and an explicit expression of the control parameters are derived. Moreover, an adaptive cut-off frequency based power allocation approach is proposed to guarantee that the SCs can provide sustainable power supply in the long term. A laboratory testbed is built to verify the effectiveness of the proposed method. Experiment results show that the proposed method provides a lower DC bus voltage fluctuation, higher SC capacity utilization and a better protection for batteries, when compared with the conventional method.
22 July 2019 in IEEE Transactions on Industry Applications
It is expected the growing demand for supercapacitor energy storage system (ESS) in which thousands of supercapacitor cells are connected as a stack for meeting the desired load power. The lifetime of ESS dramatically depends on the operating thermal effects of individual cells. In this paper, a temperature-suppression charging strategy is proposed for supercapacitor ESS to maximize its lifetime. First, the charging current and equivalent series resistance (ESR) construct the supercapacitor thermal model, and the ESR represents the degradation degree of the supercapacitor. Second, the maximization of system lifetime and equalization of unit degradation degree jointly form a convex optimization problem with the charging time constraint. The optimization problem is solved to obtain the equivalent charging current, which is realized through PWM digital control. Simulation and experimental results show that the proposed method has the advantages of reducing ESS operating temperature and maximizing its lifetime.