Emulsion formation by homogenization is commonly used in food production and research to increase product stability and to design colloidal structures. High-energy methods such as high-pressure homogenizers and rotor–stator mixers are the two most common techniques. However, to what extent does the research community understand the emulsion formation taking place in these devices? This contribution attempts to answer this question through critically reviewing the scientific literature, starting with the hydrodynamics of homogenizers and continuing by reviewing drop breakup and coalescence. It is concluded that although research in this field has been ongoing for a century and has provided a substantial amount of empirical correlations and scaling laws, the fundamental understanding is still limited, especially in the case of emulsions with a high-volume fraction of the disperse phase, as seen in many food applications. These limitations in the current understanding are also used to provide future perspectives and suggest directions for further investigation.
Although continuous production processes are often desired, many processing industries still work in batch mode due to technical limitations. Transitioning to continuous production requires an in-depth understanding of how each unit operation is affected by the shift. This contribution reviews the scientific understanding of similarities and differences between emulsification in turbulent rotor-stator mixers (also known as high-speed mixers) operated in batch and continuous mode. Rotor-stator mixers are found in many chemical processing industries, and are considered the standard tool for mixing and emulsification of high viscosity products. Since the same rotor-stator heads are often used in both modes of operation, it is sometimes assumed that transitioning from batch to continuous rotor-stator mixers is straight-forward. However, this is not always the case, as has been shown in comparative experimental studies. This review summarizes and critically compares the current understanding of differences between these two operating modes, focusing on shaft power draw, pumping power, efficiency in producing a narrow region of high intensity turbulence, and implications for product quality differences when transitioning from batch to continuous rotor-stator mixers.
Varying processing conditions can strongly affect the microstructure of mayonnaise, opening up new applications for the creation of products tailored to meet different consumer preferences. The aim of the study was to evaluate the effect of emulsification intensity on sensory and instrumental characteristics of full-fat mayonnaise. Mayonnaise, based on a standard recipe, was processed at low and high emulsification intensities, with selected sensory and instrumental properties then evaluated using an analytical panel and a back extrusion method. The evaluation also included a commercial reference mayonnaise. The overall effects of a higher emulsification intensity on the sensory and instrumental characteristics of full-fat mayonnaise were limited. However, texture was affected, with a more intense emulsification resulting in a firmer mayonnaise according to both back extrusion data and the analytical sensory panel. Appearance, taste and flavor attributes were not affected by processing.
1 May 2017 in Chemical Engineering Research and Design