The increasingly widespread use of smartphones as real cameras on drones has allowed an ever-greater development of several algorithms to improve the image’s refinement. Although the latest generations of drone cameras let the user achieve high resolution images, the large number of pixels to be processed and the acquisitions from multiple lengths for stereo-view often fail to guarantee satisfactory results. In particular, high flight altitudes strongly impact the accuracy, and result in images which are undefined or blurry. This is not acceptable in the field of road pavement monitoring. In that case, the conventional algorithms used for the image resolution conversion, such as the bilinear interpolation algorithm, do not allow high frequency information to be retrieved from an undefined capture. This aspect is felt more strongly when using the recorded images to build a 3D scenario, since its geometric accuracy is greater when the resolution of the photos is higher. Super-Resolution algorithms (SRa) are utilized when registering multiple low-resolution images to interpolate sub-pixel information The aim of this work is to assess, at high flight altitudes, the geometric precision of a 3D model by using the the Morpho Super-Resolution™ algorithm for a road pavement distress monitoring case study.
In line with globally shared environmental sustainability goals, the shift towards citizen-friendly mobility is changing the way people move through cities and road user behaviour. Building a sustainable road transport requires design knowledge to develop increasingly green road infrastructures and monitoring the environmental impacts from mobile crowdsourced data. In this view, the paper presents an empirically based methodology that integrates the vehicle-specific power (VSP) model and microscopic traffic simulation (AIMSUN) to estimate second-by-second vehicle emissions at urban roundabouts. The distributions of time spent in each VSP mode from instantaneous vehicle trajectory data gathered in the field via smartphone were the starting point of the analysis. The versatility of AIMSUN in calibrating the model parameters to better reflect the field-observed speed-time trajectories and to enhance the estimation accuracy was assessed. The conversion of an existing roundabout within the sample into a turbo counterpart was also made as an attempt to confirm the reproducibility of the proposed procedure. The results shed light on new opportunities in the environmental performance evaluation of road units when changes in design or operation should be considered within traffic management strategies and highlighted the potential of the smart approach in collecting big amounts of data through digital communities.
The paper addresses issues related to Passenger Car Equivalents (PCEs) at roundabouts. Compared to other road units, the curvilinear elements of roundabout geometric design may impose greater constraints on vehicular trajectories and have a significant effect on the swept envelope of heavy vehicles. Specifically, the aim of the paper is to present the methodological approach which used traffic microsimulation to estimate PCEs. Focus is made on a case study which considered the conversion of a two-lane roundabout into a basic turbo roundabout with comparable size. Empirical capacity functions for both roundabouts were derived as target values to which simulated capacities by lane were compared. In order to estimate the PCEs a criterion of equivalence based on the amount of capacity used by cars and heavy vehicles is presented. AIMSUN allowed to simulate traffic conditions with different percentages of heavy vehicles at both roundabouts. Thus, variation of traffic conditions where mixed fleets operate was explored. A comparison was made between the PCEs estimated for each entry lane characterized by similar mechanism of entry maneuver. The results indicated there is a need to distinguish the impact of heavy vehicles when operational performance of a two-lane roundabout or a turbo-roundabout should be examined. Especially when circulating flows increase, a higher PCE value is expected than the value that the Highway Capacity Manual proposes for roundabouts.
Resource depletion and climate change, amongst others, are increasingly worrying environmental challenges for which the road engineering sector is a major contributor. Globally, viable solutions that comply with the principles of circular economy (CE) are being investigated that can replace conventional asphalt mixtures in a post-fossil fuel society. The use of reclaimed asphalt (RA) is a widely used and well-established method to reduce the environmental and economic impacts of asphalt mixtures while increasing their circularity. However, RA’s market supply and demand have not yet been systematically analyzed and established. Moreover, the actual circularity potential and the opportunity of re-circulating RA in a closed-loop model have not yet been methodically defined. To address this, a three-layered framework to quantify and assess the circularity potential (Ω) of RA has been developed. To give stakeholders and legislative bodies a simple method to assess the opportunities available to them to become “more circular”, a novel equation has been formulated. This takes the form of a three-level indicator that considers: technical aspects, the effect of the RA market, and the legislative restrictions. A case study in Germany was structured and undertaken to develop and verify the proposed approach. The results indicate that the available RA is insufficient to cover the needs of asphalt mixture production; even though RA production is significantly lower than the actual need of asphalt mixtures, it is not utilized in its entirety. An impactful step forward is the alteration of the regulations to support the higher utilization of RA in asphalt mixtures, and subsequently, the increased circular opportunity and potential of RA. Thus, Circularity potential (Ω) is a composite indicator that can support stakeholders, designers, and asset managers during the process of decision-making, to follow more circular operational, design, and asphalt pavement management patterns.
Asphalt binder is a crucial component of asphalt pavements that undergoes ageing over time, which can result in the reduced performance and deterioration of pavements. Consequently, artificial ageing methods play a significant role in providing valuable insights into the ageing behaviour and long-term performance of asphalt binders. However, a consensus on the most effective method for simulating ageing behaviour remains elusive, leading to disparities in the outcomes across different research studies. To address this issue, the study utilises two thermo-oxidative ageing approaches, one focusing on the binder itself and another on the loose asphalt mixture. The study investigates the effect of these ageing methods on the behaviour of asphalt binder using physical, rheological, and chemical characterisation. For the binder ageing method, a rolling thin film oven (RTFO) and a pressure ageing vessel (PAV) were utilised, whereas the loose asphalt mixture ageing was performed in an oven at 95 °C for various durations. The results indicated that the ageing trend differed between the two oxidative ageing approaches as the ageing duration increased. However, by employing an ageing sensitivity index, comparable rheological properties were observed between the binders aged using the PAV for 20 h and the loose asphalt mixture for 5 days. The Fourier Transform Infrared (FTIR) spectroscopy analysis revealed that the ageing methods influenced the functional groups associated with ageing in distinct ways, even though they exhibited similar rheological behaviour. Overall, this study provides a comprehensive understanding of different thermo-oxidative ageing approaches, their correlation, and their relevance to the studied field-aged binders.
Achieving reliable interoperability between architectural and structural models remains one of the main challenges in BIM-based design workflows. Despite the widespread adoption of Building Information Modeling, the automatic transfer of information between modeling software and FEM analysis tools continues to generate inconsistencies, information loss, and the need for manual interventions. This study examines these issues through the case study of a reinforced-concrete residential building located in Palermo, used to evaluate BIM-to-FEM exchanges between Revit®, Robot Structural Analysis®, PRO_SAP®, and JASP®. The interoperability tests highlight significant limitations in both native and IFC-based workflows. The direct Revit–Robot link ensures good geometric consistency but still requires manual correction of analytical axes, connections, and boundary conditions. Indirect transfers via IFC exhibit greater instability: both IFC2x3 Coordination View 2.0 and IFC4 Reference View show difficulties in correctly interpreting structural elements and do not adequately preserve analytical relationships, resulting in unconnected slabs, disconnected nodes, and missing constraint information. In PRO_SAP®, several elements are also absent after IFC import. To address these issues, the study proposes a workflow based on the integration of Revit® and JASP® aimed at generating a reliable federated model. This model was further validated in Navisworks®, Solibri Anywhere®, BIM Vision®, and Enscape® to assess its correct interpretation across different software environments. This approach enhances interdisciplinary coordination, supports clash detection, facilitates immersive VR-based review, and centralizes architectural, structural, and MEP models into a unified environment. The results show that structured workflows and careful management of native and IFC transfers significantly improve model reliability and reduce design inconsistencies.