The adverse effect of the use of fossil fuels on the environment and public health has given rise to a sustained renewable energy research and development. An important component of global renewable energy mix is the use of loose biomass, including agricultural and forestry residues, to produce solid fuels in the form of briquettes. Briquettes play a significant role in bioenergy mix in developing and developed countries. The production of biomass briquettes often entails the collection, transportation, storage, processing, and compaction of loose biomass that meet specific quality parameters. The densification process often involves the addition of binders to improve the cohesive strength of the briquette material. This paper surveys recent literature from 2012 to 2021 to establish the current state of research on the use of binders in briquette production; and reviews current parameters used in assessing the quality of biomass briquettes with focus on mechanical and handling properties. While a number of quality parameters were identified, their assessment methodologies varied widely in the literature, thus necessitating standardization for comparability purposes. The review also includes factors affecting the wide production and adoption of biomass briquettes in most developing economies and proposes ways of overcoming the bottlenecks.

Technology development, in terms of both capability and cost-effective integration, is moving at a fast pace. While advanced robotic systems are already commonplace in controlled workspaces such as factories, the use of remote controlled or autonomous machines in more complex environments, such as for forest operations, is in its infancy. There is little doubt autonomous machinery will play an important role in forest operations in the future. Many machine functions already have the support of automation, and the implementation of remote control of the machine where an operator can operate a piece of equipment, typically in clear line-of sight, at least is commonly available. Teleoperation is where the operator works from a virtual environment with live video and audio feedback from the machine. Since teleoperation provides a similar operator experience to working in the machine, it is relatively easy for an operator to use teleoperation. Autonomous systems are defined by being able to perform certain functions without direct control of a human operator. This paper presents opportunities for remote control, teleoperated machines in forest operations and presents examples of existing developments and ideas from both forestry and other industries. It identified the extraction phase of harvesting as the most logical placement of autonomous machines in the near-term. The authors recognise that, as with all emerging technologies and sectors, there is ample scope for differences in opinions as to what will be commercially successful in the future.

In this study, the energy performance of an improved cookstove (ICS) is evaluated and compared with the performance of a charcoal stove and the three-stone fire using two biomass fuel – rice husk and sawdust briquettes. The performance of the cookstoves is evaluated based on the standard testing protocol of water boiling test in three phases – cold start, hot start and simmering. The energy performance of the cookstoves is compared using analysis of variance (ANOVA). The results of the study show that the ICS performed better in the cold and hot starts as opposed to the simmering phase. ANOVA shows that the thermal efficiency, firepower, specific fuel consumption, time to boil, burning rate and the turndown ratio of the three cookstoves are significantly different (p < 0.05) from one another for each of the fuel types. In the high power phase, the ICS offered superior energy performance over the two conventional cookstoves with the use of rice husk briquette as fuel. However, the performance of the ICS is low compared to that of the two conventional cookstoves in the simmering phase. The ICS offered better thermal efficiency over the traditional cookstoves and some other ICSs in the literatures.

The importance of hand anthropometry as it relates to design of hand tools particularly for farm workers have been established; however, anthropometric data for this group of agricultural workers have continued to remain scarce. A survey of hand anthropometry relevant in design of agricultural hand tools was carried out on 200 male and 100 female adult farm workers in south-eastern Nigeria. Comparison of the male and female data obtained showed that male dimensions were higher than that recorded for the females. The hand anthropometric data of the male and female farm workers were compared with that of other populations but no clear distinction was observed. It was however clear that the following hand dimensions, 2nd Joint to root digit 3 and width at tip digit 3 recorded for Nigerian farm workers were highest and lowest, respectively, compared to other populations. Practitioner Summary: Hand anthropometric data relevant in design of hand tools have continued to remain scarce particularly for farm workers. Hand anthropometry survey of farm workers carried out in south-eastern Nigeria revealed higher dimensions for males than females; however, no clear distinction was observed in comparison with other populations.