A TiO2 nanotubes array film with nanowires directly formed on top (denoted as TiO2 NTWs) was prepared by an anodization method (potentiostatic anodization growth). Bi2S3 QDs were sensitized on the CdS/TiO2 NTWs array by a simple successive ionic layer adsorption and reaction (S-SILAR). A short-circuit photocurrent density of 2.16 mA cm−2 was obtained under an illumination of AM 1.5 G. The data of the photoelectrochemical performance test show that Bi2S3/CdS co-modification can boost the photocurrent density of the bare TiO2 NTWs by up to 308%. The photocatalytic activity was tested by treating rhodamine B (RhB) and methyl orange (MO) solutions, which were degraded completely after 240 min and 210 min, respectively. The present study shows the Bi2S3/CdS/TiO2 NTWs array can be applied in photocatalytic devices, and the greatest advantages are low-cost, easy reuse and recyclability.
1 December 2011 in Electrochemistry Communications
A PbS counter electrode (CE) has been fabricated by a chemical bath deposition method, and can function as a counter electrode with high catalytic activity for quantum dots-sensitized solar cells (QDSSCs). The PbS nanoparticles can act as an excellent electrical tunnel for fast electron transport from an external circuit to the CE. Electrochemical impedance spectroscopy reveals a low charge transfer resistance (Rct1) between polysulfide and PbS, the optimized PbS CE shows an Rct1 as low as 15.42 Ω cm2. The current density–voltage curves of the QDSSCs were investigated under AM 1.5 light at 100 mW cm−2. CdS quantum dots-sensitized solar cells with the PbS CE achieved a power energy conversion efficiency of 2.91% and showed no obvious degradation of current density over 72 h under ambient conditions.