Gabriel Sales Candido Souza

Prof. Dr. Gabriel Sales Candido Souza

Department of Materials Engineering, University of São Paulo, Lorena, Brazil
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 April 2021 in Journal of Composite Materials
Verified
Journal Article
Closed access
PDF file
NHNícholas Hoffmann
Nícholas Hoffmann
Gabriel Sales Candido SouzaGabriel Sales Candido Souza
Gabriel Sales Candido Souza
ASAndré J Souza
André J Souza
VTVolnei Tita
Volnei Tita
Drilling of carbon fiber-reinforced polymer (CFRP) is widely employed in manufacturing processes in the aeronautical, automobile, and energy industries. The evaluation of the hole region focusing on wall roughness and delamination phenomena is extremely important to predict bolted joints' performance, where at least one of the adherent is a composite material. Thus, this work performed a statistical analysis on the delamination (entrance and exit of the plate) and wall roughness of drilling holes in an 8.6 mm thick CFRP plate carried out by an uncoated carbide drill under compressed air-cooling, varying the cutting speeds and feed rates. Since air-cooling usage combines positive aspects, such as low-cost implementation and shorter process time compared to ultrasonic-assisted drilling, it turns out to be an excellent alternative for aeronautical industry. Thus, the main contribution of the present work consists on analyzing the variation of the delamination in the entrance and exit of the first and tenth holes of a CFRP plate after dry and air-cooled drilling. This variation of the delamination between the cold drill (first hole) and the heated drill due to the drilling holes' sequence (after ten holes) is investigated for 18 different combinations of parameters (runs). For instance, it is shown that if the combination of parameters values is suitable, then it is possible to reduce the mean value of adjusted delamination factor for the entrance of the tenth hole around 11% when comparing cooled-air with dry cutting.

8 January 2020 in The Journal of Adhesion
Verified
Journal Article
Closed access
RMRicardo De Medeiros
Ricardo De Medeiros
Gabriel Sales Candido SouzaGabriel Sales Candido Souza
Gabriel Sales Candido Souza
DMD.E.T. Marques
D.E.T. Marques
FFF.R. Flor
F.R. Flor
VTV. Tita
V. Tita
The present study verifies the applicability of vibration-based Structural Health Monitoring (SHM) to identify debonding in bi-clamped metal-composite bonded joints, which can be applied in aeronautical structures. The method compares the Frequency Response Functions (FRFs) of the case studies with and without debonding damage. This analysis is done mainly through metrics of damage detection based on a comparison between the magnitude and phase angles of FRFs. The same metrics were also used after the application of a data filtering process. The specimens were manufactured from carbon-fiber-reinforced polymers and titanium and were joined by epoxy resin. Half of the specimens have a piezoelectric transducer (PZT) attached to the titanium adherent. The debonding damage was simulated for the damaged specimens by having 50% of the overlap area covered by a layer of Teflon. Three case studies have been reported: first, it verifies the influence of the PZT on FRFs; second, it evaluates the influence of the debonding damage by using accelerometers, and third, it performs the damage detection analysis by using the electrical responses of the PZT. Numerical and experimental analyses are compared, evaluating limitations and potentialities of the computational models. The results support the applicability of the metrics for damage quantification.

4 October 2023 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
Gabriel Sales Candido SouzaGabriel Sales Candido Souza
Gabriel Sales Candido Souza
Marcelo Leite RibeiroMarcelo Leite Ribeiro
Marcelo Leite Ribeiro
VTVolnei Tita
Volnei Tita

19 June 2025 in Composite Structures
Verified
Journal Article
Closed access
Gabriel Sales Candido SouzaGabriel Sales Candido Souza
Gabriel Sales Candido Souza
ASAnderson Lima dos Santos
Anderson Lima dos Santos
MMMaísa Milanez Ávila Dias Maciel
Maísa Milanez Ávila Dias Maciel
Rui Miranda GuedesRui Miranda Guedes
Rui Miranda Guedes
PTPaulo J. Tavares
Paulo J. Tavares
VTVolnei Tita
Volnei Tita


27 May 2024 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Verified
Journal Article
Closed access
Gabriel Sales Candido SouzaGabriel Sales Candido Souza
Gabriel Sales Candido Souza
BFBehzad V Farahani
Behzad V Farahani
RGRui Miranda Guedes
Rui Miranda Guedes
EGEduardo Gerhardt
Eduardo Gerhardt
SASandro Campos Amico
Sandro Campos Amico
VTVolnei Tita
Volnei Tita
This study introduces a novel approach to obtaining and predicting damage evolution laws using quasi-static cyclic testing within the framework of continuum damage mechanics. To achieve this, a comprehensive set of characterization and parameter identification tests was performed. Carbon-epoxy specimens were manufactured using the filament-winding technique, and these laminates were tested using a universal testing machine. Digital image correlation was employed in all experiments to capture strain fields, and an alternative method utilizing the combined loading compression device is presented to obtain mechanical properties. Once the material was characterized, cyclic tests were conducted, including 20 ∘ , 45 ∘ , and 90 ∘ tensile tests, and shear v-notch tests. These aim to determine damage evolution laws for both conditions, pure and coupled stress states. From these tests, values for damage onset and threshold were obtained and used to define four new parameters. These parameters permit the estimation of degradation relationships for any arbitrary orientation without requiring additional tests. This approach was tested as the proof-of-concept within the positive range of transverse tension and in-plane shear stress domain. The obtained results are promising, justifying its extension to other failure mechanisms. While acknowledging its limitations, this new approach holds potential for implementation in the analysis of progressive failure in fiber-reinforced composite materials, possibly in conjunction with established failure criteria and computational tools, mainly in the finite element method domain.