One of the big concerns when planning the expansion of power distribution systems (PDS) is reliability. This is defined as the ability to continuously meet the load demand of consumers in terms of quantity and quality. In a scenario in which consumers increasingly demand high supply quality, including few interruptions and continuity, it becomes essential to consider reliability indices in models used to plan PDS. The inclusion of reliability in optimization models is a challenge, given the need to estimate failure rates for the network and devices. Such failure rates depend on the specific characteristics of a feeder. In this context, this paper discusses the main reliability indices, followed by a comprehensive survey of the methods and models used to solve the optimal expansion planning of PDS considering reliability criteria. Emphasis is also placed on comparing the main features and contributions of each article, aiming to provide a handy resource for researchers. The comparison includes the decision variables and reliability indices considered in each reviewed article, which can be used as a guide to applying the most suitable method according to the requisites of the system. In addition, each paper is classified according to the optimization method, objective type (single or multiobjective), and the number of stages. Finally, we discuss future research trends concerning the inclusion of reliability in PDS expansion planning.
This article proposes a framework that uses analytical assessment of reliability to guide the expansion planning of power distribution systems (PDS) considering reliability criteria. The framework allows the estimation of reliability indices with and without the execution of expansion projects, thus supporting the decision-making process on investments in expansion projects. In the analytical assessment of reliability, failure rates of zones and restoration times are calculated from past data of interruptions in the primary distribution network. In addition, the estimated reliability indices are adjusted to historical values through failure rates proportionate to the length of each zone. To test and validate the proposed framework, it was applied to the distribution network at bus 5 of the Roy Billinton Test System (RBTS) and also to a real distribution feeder located in Brazil. The results indicated that the proposed framework can help define the most attractive investments leading to improvements in reliability indices and reduction in unsupplied energy. The estimation of reliability indices and energy not supplied, considered the following expansion alternatives: (i) the installation of normally-closed sectionalizing switches, (ii) the installation of normally-open switches with interconnection to adjacent feeders, (iii) the automation of switches, and (iv) the reconductoring of zones of the primary distribution network. Nevertheless, the proposed framework allows the inclusion of other expansion alternatives. Finally, the proposed framework proved to be handy and useful for real-life applications.
4 February 2026 in Electric Power Systems Research
This article presents a mixed-integer linear programming (MILP) model for assessing the reliability of active distribution networks through the estimation of network operation during normal conditions and contingencies. The adopted approach enables an analysis of the impact of transforming a passive network into an active network, as it considers self-healing mechanisms that implement topology modifications, including power restoration through microgrids and interconnection lines. To validate the optimization model, a 12-node test system was employed. The results demonstrate the significance of active network operation in enhancing reliability.