Urban parks play an important role in preserving and promoting the health of citizens who are often exposed to noise pollution and the stress of daily life. The present study describes the main results obtained from a survey performed in five urban parks in Milan. Measurements of the acoustic environment were carried out in 29 sites together with interviews with 231 users on certain aspects of the parks not limited to merely sound. Acoustic data show that the surveyed parks mostly do not comply with the noise limit issued by the Italian legislation on protected areas. The unweighted 1/3-octave spectrum centre of gravity G and LA50 perform satisfactorily in discriminating among the acoustic environments. Such clear distinction was not observed in the subjective ratings on the perceived quality of the soundscape, likely due to the influence by non-acoustic factors that act as mediators in the assessment. This hypothesis is supported by the collected data on the perceived quality of quietness, which was rated worse than that of the soundscape. Comparing acoustic data with ratings, the perceived quality of the total environment was found to be less dependent on LAeq than soundscape and quietness.
Dynamap, a co-financed project by the European Commission through the Life+ 2013 program, aims at developing a dynamic approach for noise mapping that is capable of updating environmental noise levels through a direct link with a limited number of noise monitoring terminals. Dynamap is based on the idea of finding a suitable set of roads that display similar traffic noise behavior (temporal noise profile over an entire day) so that one can group them together into a single noise map. Each map thus represents a group of road stretches whose traffic noise will be updated periodically, typically every five minutes during daily hours and every hour during night. The information regarding traffic noise will be taken continuously from a small number of monitoring stations (typically 24) appropriately distributed over the urban zone of interest. To achieve this goal, we have performed a detailed analysis of traffic noise data, recorded every second from 93 monitoring stations randomly distributed over the entire urban area of the City of Milan. Our results are presented for a restricted area, the urban Zone 9 of Milan. We have separated the entire set of (about 2000) stretches into six groups, each one represented by a noise map, and gave a prescription for the locations of the future 24 monitoring stations. From our analysis, it is estimated that the mean overall error for each group of stretches (noise map), averaged over the 24 h, is about 2 dB.
The characterization of environmental quality and the detection of the first sign of environmental stress, with reference to human intrusion, is currently a very important goal to prevent further environmental degradation, and consequently habitat destruction, in order to take appropriate preservation measures. Besides the traditional field observation and satellite remote sensing, geophonic and/or biophonic sounds have been proposed as potential indicators of terrestrial and aquatic settings’ status. In this work, we analyze a series of short audio-recordings taken in urban parks and bushes characterized by the presence of different human-generated-noise and species abundance. This study aims to propose a tool devoted to the investigation of urban and natural environments in a context with different soundscape qualities, such as, for example, those that can be found in urban parks. The analysis shows the ways in which it is possible to distinguish among different habitats by the use of a combination of different acoustic and sound ecology indices.
A “real-time” noise mapping project, named DYNAMAP, has been developed in the framework of a Life+ 2013 program and cofunded by the European Commission. The project aims at giving a real picture of the noise generated by vehicular traffic. To this purpose, a dedicated platform has been developed to elaborate the information from distributed noise monitoring stations. The methodology has been implemented along the ring road encircling the city of Rome (Italy). A detailed description of the system is given together with a report on the testing campaign that allowed evaluation of the accuracy and reliability of the system. From the monitoring campaign satisfactory results have been achieved, showing an average overall prediction error of ~1.5 dB.
12 December 2015 in Environmental Monitoring and Assessment
Road traffic in urban areas is recognized to be associated with urban mobility and public health, and it is often the main source of noise pollution. Lately, noise maps have been considered a powerful tool to estimate the population exposure to environmental noise, but they need to be validated by measured noise data. The project Dynamic Acoustic Mapping (DYNAMAP), co-funded in the framework of the LIFE 2013 program, is aimed to develop a statistically based method to optimize the choice and the number of monitoring sites and to automate the noise mapping update using the data retrieved from a low-cost monitoring network. Indeed, the first objective should improve the spatial sampling based on the legislative road classification, as this classification is mainly based on the geometrical characteristics of the road, rather than its noise emission. The present paper describes the statistical approach of the methodology under development and the results of its preliminary application to a limited sample of roads in the city of Milan. The resulting categorization of roads, based on clustering the 24-h hourly LAeqh, looks promising to optimize the spatial sampling of noise monitoring toward a description of the noise pollution due to complex urban road networks more efficient than that based on the legislative road classification.