DC-DC boost converters are necessary to extract power from solar panels. The output voltage from these panels is far lower than the utility voltage levels. One of the main functions of the boost converter is to provide a considerable step-up gain to interface the panel to the utility lines. There are several techniques used to boost the low panel voltage. Some of the issues faced by these topologies are a high duty ratio operation, complex design with multiple active switches and discontinuous input current that affects the power drawn from the panel. This paper presents a boost converter topology that combines the advantages of an interleaved structure, a voltage lift capacitor and a passive voltage multiplier network. A mathematical analysis of the proposed converter during its various modes of operation is presented. A 100 W prototype of the proposed converter is designed and tested. The prototype is controlled by a PIC16F18455 microcontroller. The converter is capable of achieving a gain of 10 without operating at extremely high duty ratios. The voltage stress of the switch is far lower than the maximum output voltage.
The increase in global energy demand has led to increased research in harvesting solar energy. Solar energy is widely used in homes, electric vehicles and is a great solution to power remote areas. DC–DC converters are essential in extracting power from solar panels. One of the main problems in designing converters for solar energy applications is boosting the low output voltage of the solar panel to meaningful levels. While there are several topologies to achieve high gain, some of the problems faced by them are the extreme duty ratio, complex design and discontinuous input current. This paper presents a novel topology that uses an interleaved input, a voltage lift capacitor and a hybrid switched capacitor network to achieve high gain without an extreme duty ratio or bulky magnetics. The proposed converter is controlled using a microcontroller which regulates the output voltage. The voltage lift capacitor and the switched capacitor network enhances the voltage gain over a conventional boost converter without an extreme duty ratio. The analysis and design of the proposed converter are presented and verified with a 100 W prototype. The results show that the converter provides a gain of 10, at a duty ratio of 30%, while delivering the designed output power with considerably high efficiency.