Grzegorz Węgrzyk

Dr. Grzegorz Węgrzyk

Politechnika Warszawska
+1
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 December 2021 in Materials
Verified
Journal Article
Open access
PDF file
DGDominik Jan Grzęda
Dominik Jan Grzęda
GWGrzegorz Węgrzyk
Grzegorz Węgrzyk
MLMilena Leszczyńska
Milena Leszczyńska
LSLeonard Szczepkowski
Leonard Szczepkowski
MGMichał Gloc
Michał Gloc
Joanna RyszkowskaJoanna Ryszkowska
Joanna Ryszkowska
One of the essential factors in prostheses is their fitting. To assemble a prosthesis with the residual limb, so-called liners are used. Liners used currently are criticized by users for their lack of comfort, causing excessive sweating and skin irritation. The objective of the work was to develop viscoelastic polyurethane foams for use in limb prostheses. As part of the work, foams were produced with different isocyanate indexes (0.6–0.9) and water content (1, 2 and 3 php). The produced foams were characterized by scanning electron microscopy, computer microtomography, infrared spectroscopy, thermogravimetry and differential scanning calorimetry. Measurements also included apparent density, recovery time, rebound elasticity, permanent deformation, compressive stress value and sweat absorption. The results were discussed in the context of modifying the foam recipe. The performance properties of the foams, such as recovery time, hardness, resilience and sweat absorption, indicate that foams that will be suitable for prosthetic applications are foams with a water content of 2 php produced with an isocyanate index of 0.8 and 0.9.

20 June 2023 in Polymers
Verified
Journal Article
Open access
PDF file
DGDominik Jan Grzęda
Dominik Jan Grzęda
GWGrzegorz Węgrzyk
Grzegorz Węgrzyk
ANAdriana Maryla Nowak
Adriana Maryla Nowak
JIJoanna Idaszek
Joanna Idaszek
LSLeonard Szczepkowski
Leonard Szczepkowski
Joanna RyszkowskaJoanna Ryszkowska
Joanna Ryszkowska
Polyurethane foams are widely used in biomedical applications due to their desirable mechanical properties and biocompatibility. However, the cytotoxicity of its raw materials can limit their use in certain applications. In this study, a group of open-cell polyurethane foams were investigated for their cytotoxic properties as a function of the isocyanate index, a critical parameter in the synthesis of polyurethanes. The foams were synthesized using a variety of isocyanate indices and characterized for their chemical structure and cytotoxicity. This study indicates that the isocyanate index highly influences the chemical structure of polyurethane foams, also causing changes in cytotoxicity. These findings have important implications for designing and using polyurethane foams as composite matrices in biomedical applications, as careful consideration of the isocyanate index is necessary to ensure biocompatibility.

16 January 2023 in Materials
Verified
Journal Article
Open access
PDF file
GWGrzegorz Węgrzyk
Grzegorz Węgrzyk
DGDominik Jan Grzęda
Dominik Jan Grzęda
Joanna RyszkowskaJoanna Ryszkowska
Joanna Ryszkowska
This article presents the results of testing foam blocks made with a high-pressure foaming machine under industrial conditions. Foam blocks were made at pressures in the range of 110–170 bar with substrate temperatures allowed by machine suppliers. The foaming process parameters of each block were evaluated. The structure of the foams in the outer and central parts of the blocks was characterized using FTIR spectroscopic analysis and microscopic observations using SEM. The changes in apparent density, strength properties and brittleness of the foams were evaluated. The properties of the blocks made at different mixing pressures varied depending on the pressure at which the substrates were mixed and the location in the block. The biggest differences that were observed were the friability of the foams taken from different locations in the blocks by up to about 30%; the apparent density differed by about 8% and the compressive strength by about 5%.

18 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
GWGrzegorz Węgrzyk
Grzegorz Węgrzyk
DGDominik Jan Grzęda
Dominik Jan Grzęda
MLMilena Leszczyńska
Milena Leszczyńska
LVLaima Vevere
Laima Vevere
Ugis CabulisUgis Cabulis
Ugis Cabulis
Joanna RyszkowskaJoanna Ryszkowska
Joanna Ryszkowska
The influence of both mixing pressure and substrate temperature on the structure and properties of spray polyurethane foams produced with a high content (80%) of tall oil-based polyol was investigated. The use of a renewable feedstock such as tall oil polyol aligns with the principles of sustainable development by reducing the carbon footprint and minimizing the environmental impact of the production process. The research focused on identifying the relationships between process parameters and the resulting materials’ thermal insulation properties, physico-mechanical performance, thermal behavior, cellular structure, and chemical composition. The results demonstrated that increasing the mixing pressure (from 12.5 to 17.5 MPa) and substrate temperature (from 40 to 55 °C) led to a reduction in average pore diameter, an increase in closed-cell content up to 94.5% and improved structural homogeneity. The thermal conductivity coefficient (λ) ranged from 18.55 to 22.30 mW·m−1·K−1 while apparent density varied between 44.0 and 45.5 kg·m−3. Higher mixing pressure positively affected compressive strength, whereas elevated substrate temperature reduced this parameter. Brittleness, water uptake, and dimensional stability remained at favorable levels and showed no significant correlation with processing conditions. These findings confirm the high quality of the materials and highlight their potential as sustainable, environmentally friendly insulation foams.

11 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
DGDominik Jan Grzęda
Dominik Jan Grzęda
GWGrzegorz Węgrzyk
Grzegorz Węgrzyk
ANAdriana Maryla Nowak
Adriana Maryla Nowak
GKGabriela Komorowska
Gabriela Komorowska
LSLeonard Szczepkowski
Leonard Szczepkowski
Joanna RyszkowskaJoanna Ryszkowska
Joanna Ryszkowska
Components for manufacturing polyurethane foams can adversely affect the human body, particularly if they are in contact with it for long periods. In applications where the foam is not placed directly into the body, the study of the product’s effects is often neglected. In the case of human skin, distinguishing the increasingly frequent problems of skin atopy, more attention should be paid to this. This paper presents the influence of the different catalytic systems on cytotoxic and thermomechanical properties in polyurethane foams. Among others, foams were produced with the most popular catalysts on the market, DABCO and a metal-organic tin catalyst. The foams were characterized by thermomechanical properties and were subjected to a cytotoxicity test against human keratinocytes. In biocompatibility tests with skin cells, the results were highly variable. VAB 2 with a catalytic system consisting of commercial Diethanolamine and Addocat®105 performed the best. However, with such a catalytic system, the mechanical properties have worsened.

16 November 2024 in Polymers
Verified
Journal Article
Open access
PDF file
GWGrzegorz Węgrzyk
Grzegorz Węgrzyk
DGDominik Jan Grzęda
Dominik Jan Grzęda
MLMilena Leszczyńska
Milena Leszczyńska
BNBartosz Nędza
Bartosz Nędza
KBKatarzyna Bulanda
Katarzyna Bulanda
Ugis CabulisUgis Cabulis
Ugis Cabulis
The growing demand for viscoelastic polyurethane foams creates a need for new sustainable raw materials that support cost-effective production while maintaining the desired material performance and fire safety standards. In this regard, our study aimed to develop viscoelastic polyurethane foam composites with reduced flammability and a high proportion of renewable raw materials. To achieve this, blackcurrant pomace, expandable graphite and a third-generation blowing agent were introduced to a viscoelastic polyurethane foam composition containing a reactive flame retardant in the formulation. The effects of the incorporated additives on the foaming process, flammability, chemical structure, cellular structure, thermal properties and physico-mechanical properties of the composites were determined. The results showed that the viscoelastic foam composite containing 30 php of blackcurrant pomace and 15 php of expandable graphite had a pHRRmax 52% lower than that of the reference material. The additional use of a blowing agent enhanced the flame-retardant effect of the materials, resulting in a 67% reduction in pHRRmax of the composite compared to the reference material. Moreover, the developed biocomposites exhibited promising limiting oxygen index values of 26–28%, compared to the 21% shown for the reference sample. Consequently, the best-performing biocomposites achieved the V-0 flammability rating according to the UL-94 standard. This study’s results indicate the composites’ high application potential due to their reduced flammability and the materials’ desirable physical and mechanical properties.