Multi-material structures have great potential in high-end fields such as aerospace and energy. Which integrate the advantages of various metals and meet the demands of complex working conditions. Among additive manufacturing technologies for multi-material structures, wire-based processes have become a research hotspot due to their high material utilization, low cost, and high efficiency. This article systematically reviews the progress of research on this technology. The working principles and characteristics of common heat sources (WAAM, LWAM, EBAM) are introduced. Furthermore, the advantages and limitations of these heat sources for manufacturing multi-material structures are critically analyzed. Moreover, various metal wire combination systems (such as steel/Ni, Al/steel, Ti/Al, and Cu/Ti, etc.) were reviewed, and the differences and influences of different wire feeding methods and directions were discussed. The review highlights research findings on microstructure regulation, interfacial bonding mechanisms, and the mechanical property optimization of polymetallic structures. The influence laws of critical process parameters on structural properties are also elucidated. The existing problems in the current research were pointed out, and the future development trends were prospected. Unlike previous articles, this review establishes a more comprehensive process–structure–performance framework through the discussion of integrated heat source characteristics, wire feeding systems, and interface adjustment strategies. It aims to provide references for promoting the development and engineering application of additive manufacturing technology for wire-based multi-metal structures.

Bimetals have broad application prospects in many fields due to the combination of the performance characteristics of the two materials, but weak interface bonding limits their promotion and application. Therefore, studying the interfacial behavior to achieve bimetallic strengthening is the focus of this field. However, it is often difficult or costly to visually observe the interfacial behavior using traditional experimental methods. Molecular dynamics (MD) is an advanced microscopic simulation method that can conveniently, rapidly, accurately and intuitively study the diffusion and mechanical behavior at the bimetallic interfaces, providing a powerful tool and theoretical guidance to reveal the nature of interfacial bonding and the strengthening mechanism. This paper summarizes the research progress on molecular dynamics in the bimetallic formation process and mechanical behavior, including Al/Cu, Al/Mg, Al/Ni, Al/Ti, Al/Fe, Cu/Ni, and Fe/Cu. In addition, the future development direction is outlined to provide theoretical basis and experimental guidance for further exploring the formation process and performance enhancement of the bimetallic interfaces.

To enhance the interfacial performance of Al/Mg bimetal, this study introduced a novel Mo coating and employed an ultrasonic field (UF) to regulate the interfacial microstructure. In the absence of both a Mo coating and ultrasonic treatment (referred to as the untreated specimen), the interfacial region was primarily composed of Al-Mg intermetallic compounds (Al-Mg IMCs), Al-Mg eutectic structures (ES), and Mg₂Si phases, with an average interfacial layer thickness of approximately 1623 μm. Upon application of the Mo coating, the formation of both Al-Mg phases and Mg₂Si phases was completely inhibited. The interfacial zone was predominantly characterized by the Mo solid solution (Mo SS) and oxide, with the average thickness significantly reduced to about 28 μm. Upon applying the UF to the Mo-coated specimen, the interfacial composition remained similar to that of the untreated specimen, except for Mo SS, with the interfacial thickness increasing to 561 μm. Shear strength tests indicated that the application of the Mo coating alone resulted in a decrease in bonding strength compared to the untreated specimen. However, subsequent ultrasonic treatment significantly improved the interfacial shear strength to 54.7 MPa, representing a 60.9% increase relative to the untreated specimen. This improvement is primarily attributed to the Mo coating and UF synergistically suppressing the formation of brittle Al-Mg IMCs and reducing oxide inclusions at the interface. Thus, the simultaneous application of Mo coatings and ultrasonic fields is required to enhance the properties of Al/Mg bimetals.

Al/Mg bimetallic composites have drawn considerable attention for their promising lightweight applications in sectors such as the aerospace and automotive industries. In these systems, the interfacial behavior critically governs the overall performance and reliability. In this research, the molecular dynamics (MD) simulation was employed to systematically study the effects of pouring temperatures (923 K, 973 K, and 1023 K) and preheating temperatures (373 K, 473 K, and 573 K) on the interfacial diffusion behavior and fracture mechanism of the polycrystalline Al/Mg bimetallic system. The results indicate that the influencing rule of pouring temperatures and preheating temperatures on the interfacial diffusion behavior is consistent. Specifically, the diffusion coefficient of Mg atoms is higher than that of Al atoms, while the diffusion distance of Al atoms is significantly greater than that of Mg atoms. As the temperature increases, the thickness of the interfacial transition layer correspondingly rises. However, the effects of these two parameters on tensile fracture behavior demonstrate notable discrepancies. Specifically, the fracture mode evolves with pouring temperature, transitioning from being mediated solely by dislocations to being co-mediated by twins and dislocations. In contrast, the fracture mechanism remains solely dislocation-controlled, regardless of the preheating temperature. In addition, all the models fractured at the interface between the diffusion layer and the Mg matrix. The optimal tensile strength of 1.850 GPa was achieved at a pouring temperature of 923 K and a preheating temperature of 473 K, representing an improvement of approximately 52% compared to the lowest value recorded in the study. This research offers significant theoretical insights for the rational optimization of preparation parameters and an in-depth understanding of fracture mechanisms in Al/Mg bimetallic systems.

In this work, the Al/Mg bimetals were prepared by traveling magnetic field (TMF)-assisted compound casting, and the effects of current intensity on the interfacial microstructure and mechanical properties of the Al/Mg bimetals were investigated. The results revealed that the Al/Mg bimetallic interface without the TMF consisted of an Al-Mg intermetallic compounds (IMCs) area (Al₃Mg₂ + Al₁₂Mg₁₇ + Mg₂Si particles) and Al-Mg eutectic area (Al₁₂Mg₁₇ + δ-Mg). There was no change in the interfacial phase compositions with the TMF, but the interface thickness initially decreased and then increased with the increase in the TMF current, and the distribution of Mg₂Si became more uniform, dendrites become smaller, and dendritic arms fragment. The shear strength improves from 17 MPa without the TMF to 27 MPa with the TMFed-60 A, which was increased by 58.8%. This enhancement occurs because cracks are deflected by uniformly distributed Mg₂Si particles and do not coalesce into main cracks, ultimately fracturing in the eutectic region, which increases the length of the crack propagation path and thereby improves the shear strength of the Al/Mg bimetals.