Extraction of alcohols from n-tetradecane using various extraction solvents has been investigated at a range of temperatures from 295 to 393 K under ambient pressure. On the basis of the experimental liquid–liquid equilibrium data, the distribution ratio and selectivity were calculated for the extraction of 1-octanol, 1-decanol, and 1-dodecanol (C8–C12) in 1-ethyl-3-methylimidazolium hydrogensulfate [C2mim][HSO4] and sulfolane. Results showed that moderate selectivities were obtained in sulfolane with very low distribution coefficients. In contrast, [C2mim][HSO4] showed similar selectivity values with higher distribution coefficients. A study of a number of different 1-alcohols (C4–C12) showed that the decrease in hydrogen bonding compared to the increased van der Waals interactions between n-tetradecane and the higher-chain alcohols decreased the extraction selectivity in [C2mim][HSO4]. Increasing the temperature of the ionic liquid extraction medium resulted in increased chemical extraction for 1-butanol and 1-hexanol due to the formation of the corresponding alkylsulfate ionic liquid. In contrast, the selectivity decreased for 1-octanol, 1-decanol and 1-dodecanol due to the partial dissolution of the corresponding alkylsulfate ionic liquid into the n-tetradecane phase.
This study aims to provide insights into the experimental conditions used during the melting/casting process and subsequent thermal treatments of low-alloy steels, particularly regarding recycled scrap metals. As sustainable practices in metallurgy gain importance, optimizing scrap metal recycling is crucial for producing steel grades with desired chemical compositions, microstructures, and physical properties. Understanding these conditions is vital for enhancing the efficiency and quality of steel production from recycled materials. This study emphasizes the critical role of specific experimental conditions in the steelmaking process, especially with recycled scrap metals. It closely examines the atmosphere during melting/casting to identify key parameters that must be rigorously controlled in lab-scale steel production using a vacuum induction furnace. The findings indicate that both the chemical composition and recyclability of low-alloyed steels are significantly influenced by the surrounding atmosphere during melting and casting. Inert environments, such as vacuum or argon, are shown to be ideal for steelmaking with induction technology, particularly when recycling scrap metals. Additionally, this study highlights the importance of precise heat treatments, including homogenization and normalization, by controlling both thermal conditions and the atmosphere to produce high-quality steel from recycled scraps.