Grigory Veselov

Mr. Grigory Veselov

Boreskov Institute of Catalysis
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 October 2023 in Materials
Verified
Journal Article
Open access
PDF file
GVGrigory Veselov
Grigory Veselov
Aleksey A. VedyaginAleksey A. Vedyagin
Aleksey A. Vedyagin
Carbon xerogels (CXs) are materials obtained via the pyrolysis of resins prepared via the sol–gel polycondensation of resorcinol and formaldehyde. These materials attract great attention as adsorbents, catalyst supports, and energy storage materials. One of the most interesting features of CXs is the possibility of fine-tuning their structures and textures by changing the synthesis conditions in the sol–gel stage. Thus, the first part of this review is devoted to the processes taking place in the polycondensation stage of organic precursors. The formation of hydroxymethyl derivatives of resorcinol and their polycondensation take place at this stage. Both of these processes are catalyzed by acids or bases. It is revealed that the sol–gel synthesis conditions, such as pH, the formaldehyde/resorcinol ratio, concentration, and the type of basic modifier, all affect the texture of the materials being prepared. The variation in these parameters allows one to obtain CXs with pore sizes ranging from 2–3 nm to 100–200 nm. The possibility of using other precursors for the preparation of organic aerogels is examined as well. For instance, if phenol is used instead of resorcinol, the capabilities of the sol–gel method become rather limited. At the same time, other phenolic compounds can be applied with great efficiency. The methods of gel drying and the pyrolysis conditions are also reviewed. Another important aspect analyzed within this review is the surface modification of CXs by introducing various functional groups and heteroatoms. It is shown that compounds containing nitrogen, sulfur, boron, or phosphorus can be introduced at the polycondensation stage to incorporate these elements into the gel structure. Thus, the highest surface amount of nitrogen (6–11 at%) was achieved in the case of the polycondensation of formaldehyde with melamine and hydroxyaniline. Finally, the methods of preparing metal-doped CXs are overviewed. Special attention is paid to the introduction of a metal precursor in the gelation step. The elements of the iron subgroup (Fe, Ni, Co) were found to catalyze carbon graphitization. Therefore, their introduction can be useful for enhancing the electrochemical properties of CXs. However, since the metal surface is often covered by carbon, such materials are poorly applicable to conventional catalytic processes. In summary, the applications of CXs and metal-doped CXs are briefly mentioned. Among the promising application areas, Li-ion batteries, supercapacitors, fuel cells, and adsorbents are of special interest.

14 March 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
GVGrigory Veselov
Grigory Veselov
TKTimofey M. Karnaukhov
Timofey M. Karnaukhov
VSVladimir Olegovich Stoyanovskii
Vladimir Olegovich Stoyanovskii
Aleksey A. VedyaginAleksey A. Vedyagin
Aleksey A. Vedyagin
In the present work, a series of two-component Ni-Mg-O oxide systems were prepared using a sol–gel technique at varied pH of hydrolysis procedure. The aqueous solutions of nitric acid or ammonia were added to control the pH values. The xerogel samples obtained after drying were analysed using a thermogravimetric approach. The oxide systems were characterized by a set of physicochemical methods (low-temperature nitrogen adsorption, X-ray diffraction analysis, scanning electron microscopy, UV-vis spectroscopy, and temperature-programmed reduction method). The thermal stability of the samples was examined in a testing reaction of CO oxidation in a prompt thermal aging regime. It was revealed that the pH value during the magnesium methoxide hydrolysis stage significantly affects the properties of the intermediate hydroxide and final oxide nanomaterials. The thermal decomposition of nitric acid or ammonia is accompanied by exothermal effects, which noticeably influence the textural characteristics. Moreover, the pH of the hydrolysing solution defines the strength of the nickel interaction with the MgO matrix. An increase in pH facilitates the formation of the NixMg1−xO solid solution with a higher amount of incorporated nickel, which is characterized by the reproducible broad temperature range of the hydrogen uptake and the enhanced thermal stability.

Verified
Journal Article
Open access
PDF file
SASofya Dmitrievna Afonnikova
Sofya Dmitrievna Afonnikova
GVGrigory Veselov
Grigory Veselov
YBYury I. Bauman
Yury I. Bauman
Evgeny GerasimovEvgeny Gerasimov
Evgeny Gerasimov
YSYury V. Shubin
Yury V. Shubin
Aleksey A. VedyaginAleksey A. Vedyagin
Aleksey A. Vedyagin
The unique physical and chemical properties of composite materials based on carbon nanofibers (CNFs) makes them attractive to scientists and manufacturers. One promising method to produce CNFs is catalytic chemical vapor deposition (CCVD). In the present work, a method based on carbon erosion (CE) of bulk microdispersed Ni-Cu alloys has been proposed to prepare efficient catalysts for the synthesis of CNF-based composites. The initial Ni-Cu alloys were obtained by mechanochemical alloying (MCA) of metallic powders in a planetary mill. The effect of MCA duration on the phase composition of Ni-Cu samples was studied by X-ray diffraction analysis and temperature-programmed reduction in hydrogen. It has been also revealed that, during such stages as heating, reduction, and short-term exposure to the reaction mixture (C2H4/H2/Ar) at 550 °C, the formation of a Ni-based solid solution from the initial Ni-Cu alloys takes place. The early stages of the CE process were monitored by transmission electron microscopy combined with energy-dispersive X-Ray analysis. It was found that the composition of the catalytic particles is identical to that of the initial alloy. The morphological and structural features of the prepared Ni-Cu-CNF composites were studied by scanning and transmission electron microscopies. The textural characteristics of the composites were found to be dependent on the reaction time.

2 October 2020 in Materials
Verified
Journal Article
Open access
PDF file
GVGrigory Veselov
Grigory Veselov
TKTimofey M. Karnaukhov
Timofey M. Karnaukhov
YBYury I. Bauman
Yury I. Bauman
Ilya MishakovIlya Mishakov
Ilya Mishakov
Aleksey A. VedyaginAleksey A. Vedyagin
Aleksey A. Vedyagin
The present work aimed to prepare Ni-Mo particles distributed within the MgO matrix. With this purpose in mind, a ternary Ni-Mo-Mg oxide system was synthesized by a sol-gel approach. The samples were studied by low-temperature nitrogen adsorption, X-ray diffraction analysis, and transmission electron microscopy equipped with energy dispersive X-ray analysis. Both the nickel and molybdenum species in the prepared samples were characterized by a fine and uniform distribution. The diffraction pattern of the ternary system was predominantly represented by the MgO reflections. The catalytic activity of the samples was tested in the decomposition of 1,2-dichloroethane used as a representative of the chlorinated organic wastes. The nanostructured carbon filaments resulting from the decomposition of the halogenated substrate were found to be characterized by a narrow diameter distribution, according to the transmission electron microscopy data, thus confirming the fine distribution of the active Ni-Mo particles. The results obviously show the advantages of the sol-gel technique for obtaining efficient catalysts.

9 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
TKTimofey M. Karnaukhov
Timofey M. Karnaukhov
GVGrigory Veselov
Grigory Veselov
Svetlana CherepanovaSvetlana Cherepanova
Svetlana Cherepanova
Aleksey A. VedyaginAleksey A. Vedyagin
Aleksey A. Vedyagin
A sol-gel technique was applied to prepare the two-component oxide system Cu-Mg-O, where MgO plays the role of oxide matrix, and CuO is an active chemical looping component. The prepared samples were characterized by scanning electron microscopy, low-temperature nitrogen adsorption, and X-ray diffraction analysis. The reduction behavior of the Cu-Mg-O system was examined in nine consecutive reduction/oxidation cycles. The presence of the MgO matrix was shown to affect the ability of CuO towards reduction and re-oxidation significantly. During the first reduction/oxidation cycle, the main characteristics of the oxide system (particle size, crystallization degree, etc.) undergo noticeable changes. Starting from the third cycle, the system exhibits a stable operation, providing the uptake of similar hydrogen amounts within the same temperature range. Based on the obtained results, the two-component Cu-Mg-O system can be considered as a prospective chemical looping agent.

18 December 2022 in Reaction Kinetics, Mechanisms and Catalysis
Verified
Journal Article
Closed access
PDF file
GVGrigory Veselov
Grigory Veselov
VSVladimir O. Stoyanovskii
Vladimir O. Stoyanovskii
SCSvetlana V. Cherepanova
Svetlana V. Cherepanova
Aleksey A. VedyaginAleksey A. Vedyagin
Aleksey A. Vedyagin