HIZKEAL TSADE

Dr. HIZKEAL TSADE


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2021 in International Journal of Chemical Engineering
Verified
Journal Article
Open access
PDF file
HIZKEAL TSADEHIZKEAL TSADE
HIZKEAL TSADE
SASisay Tadesse Anshebo
Sisay Tadesse Anshebo
Fedlu Kedir SabirFedlu Kedir Sabir
Fedlu Kedir Sabir
GWGetachew Adam Workineh
Getachew Adam Workineh
The study was focused on the preparation and characterizations of sodium periodate-modified nanocellulose (NaIO4-NC) prepared from Eichhornia crassipes for the removal of cationic methylene blue (MB) dye from wastewater (WW). A chemical method was used for the preparation of NaIO4-NC. The prepared NaIO4-NC adsorbent was characterized by using X-ray diffraction (XRD), Fourier transform infrared (FTIR), scanning electron microscope (SEM), energy-dispersive X-ray (EDX), and BrunauerEmmettTeller (BET) instruments. Next, it was tested to the adsorption of MB dye from WW using batch experiments. The adsorption process was performed using Langmuir and Freundlich isotherm models with maximum adsorption efficiency (qmax) of 90.91 mg·g−1 and percent color removal of 78.1 at optimum 30 mg·L−1, 60min., 1g, and 8 values of initial concentration, contact time, adsorbent dose, and solution pH, respectively. Pseudo-second-order (PSO) kinetic model was well fitted for the adsorption of MB dye through the chemisorption process. The adsorption process was spontaneous and feasible from the thermodynamic study because the Gibbs free energy value was negative. After adsorption, the decreased values for physicochemical parameters of WW were observed in addition to the color removal. From the regeneration study, it is possible to conclude that NaIO4-NC adsorbent was recyclable and reused as MB dye adsorption for 13 successive cycles without significant efficient loss.

30 January 2024 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
HMHana Melese
Hana Melese
HIZKEAL TSADEHIZKEAL TSADE
HIZKEAL TSADE
New chemically amended (sodium periodate cellulose nanoparticle (NaIO4-CNP) adsorbent material was synthesized from dried fibers of cotton. The synthesized NaIO4-CNP adsorbent material was characterized for functional groups, crystallite size, surface morphology, morphological structure, and particle size) by using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), Scanning electron microscope (SEM), Transmission electron microscope (TEM) and Brunauer Emmett Teller (BET), instruments, respectively. Then it was investigated to eliminate methylene blue (MB) dye from textile secondary runoff wastewater (SERWW). The physicochemical properties of textile SERWW including organic matter (OM) and inorganic nutrients on the removal capabilities of MB dye was investigated. The adsorption mechanism study was shown that Freundlich isotherm fitted with a maximum removal capability (qmax) of 62.91 mg g−1. The elimination kinetic mechanism fits well to pseudo-second-order and its data recommended the materials (NaIO4-CNP) are effective for wastewater treatment. The MB dye uptake capacities were influenced by the presence of positively charged ions. The NaIO4-CNP adsorbent indicated excellent reproducibility considered as capable adsorption resources to eliminate MB dye from textile SERWW.

17 June 2021 in Journal of Nanotechnology
Verified
Journal Article
Open access
PDF file
HIZKEAL TSADEHIZKEAL TSADE
HIZKEAL TSADE
SASisay Tadesse Anshebo
Sisay Tadesse Anshebo
Fedlu Kedir SabirFedlu Kedir Sabir
Fedlu Kedir Sabir
In this study, both pristine cellulose nanocrystalline (CNC) and maleic anhydride functionalized cellulose nanocrystalline (MA-CNC) were prepared from the stems of Eichhornia crassipes weed by the sulfuric acid hydrolysis method. The as-prepared adsorbents were characterized by using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and BrunauerEmmettTeller (BET) instruments. These materials were applied for the removal of Cd(II) ions from WW. The uptake mechanism was fixed to both Langmuir and Freundlich adsorption isotherms with a maximum Cd(II) ion uptake capability (qmax) of 75.76 and 215.52 mg g−1 by CNC and MA-CNC adsorbents, respectively. Pseudo-second-order (PSO) kinetic model was well fitted to the uptake process. The adsorbent regeneration study was done after desorption of Cd(II) ions from the adsorbent by HCl washing. Results exhibited that the adsorbent was reused for the removal of Cd(II) ions from real WW after successive 13th cycle.

23 April 2021 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
HIZKEAL TSADEHIZKEAL TSADE
HIZKEAL TSADE
SASisay Tadesse Anshebo
Sisay Tadesse Anshebo
Fedlu Kedir SabirFedlu Kedir Sabir
Fedlu Kedir Sabir
Due to their remarkable properties, cellulose nanomaterials are emerging materials for wastewater (WW) treatment. In this study, both pristine cellulose nanomaterial (CNM) and sodium periodate modified cellulose nanomaterial (NaIO4-CNM) were prepared from the stem of the Erythrina brucei plant for the removal of Pb(II) ions from WW. As-prepared CNMs were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscope (SEM), and thermogravimetric analysis with differential thermogravimetry (TGA-DTG) analysis. The as-prepared and characterized CNMs were tested for the removal of Pb(II) ions from secondary run-off wastewater (SERWW). Langmuir and Freundlich adsorption isotherms were certainly fixed to a maximum Pb(II) ions uptake capability (Qmax) of 91.74 and 384.62mgg−1by CNM and NaIO4-CNM adsorbents, respectively. The pseudo-second-order (PSO) kinetics model was well fitted to the uptake process. Results revealed that the percentage removal (R) of Pb(II) ions was decreased by the presence of nitrogen and organic matter, but not affected by the presence of phosphorous in SERWW. Due to its high efficiency, NaIO4-CNM was selected for the regeneration study. The regeneration study was conducted after desorption of Pb(II) ions from the adsorbent by the addition of HCl, and the regenerated sorbent was reused as an adsorbent for at least 13 successive cycles. The results indicated excellent recycling capabilities, and the adsorbent was used as adsorbing material for the removal of Pb(II) ions from SERWW after 13 successive cycles without significant efficient loss.

15 May 2019 in Materials Research Express
Verified
Journal Article
Open access
PDF file
HIZKEAL TSADEHIZKEAL TSADE
HIZKEAL TSADE
BABuzuayehu Abebe
Buzuayehu Abebe
HMH C Ananda Murthy
H C Ananda Murthy
The present work involves the synthesis, characterization and sorption behavior of Fe–Al–MC nanocomposite for the removal of Pb (II) ions from industrial waste water. The sorbent was synthesized by impregnation method. X-ray diffraction (XRD), Energy-dispersive x-ray (EDX) and scanning electron microscopy (SEM) techniques were applied to study the surface structure, compositions and morphology of the materials. Fourier transform infrared technique was used to analyze the effect of surface properties on the adsorption behavior of Pb(II) ions. The optimum effects of the parameters on the adsorption of Pb (II) ions were determined to be, pH = 6, dose = 2 g, contact time = 24 h h and agitation speed = 150 rpm and initial Pb (II) ions 10 ppm. Experimentally, the adsorbed amounts of lead ion tend to decrease with increase in pH. Both Langmuir and Freundlich isotherm models fit the equilibrium data well on the adsorbent. Kinetic data correlated well with the pseudo second order kinetic model. Thermodynamic studies resulted in negative ΔG value indicating the spontaneity of the sorption process. The Fe–Al–MC nanocomposite sorbent showed a sorption capacity of 40.00 mg g−1 at pH 6. Therefore, this adsorbent with large sorption capacity and efficiency is a promising adsorbent for the removal of Pb(II) ions from the wastewater.

1 November 2020 in Materials Research Express
Verified
Journal Article
Open access
PDF file
HIZKEAL TSADEHIZKEAL TSADE
HIZKEAL TSADE
SASisay Tadesse Anshebo
Sisay Tadesse Anshebo
Fedlu Kedir SabirFedlu Kedir Sabir
Fedlu Kedir Sabir
Wastewater (WW) remediation technologies were the most crucial issues all over the world at present time. Thus, the remediation of Cr (VI) ions from real WW was conducted using green biocompatible and biodegradable pristine (CNM) and succinic anhydride functionalized cellulose nanomaterial (S-CNM) adsorbents. Both CNM and S-CNM adsorbents were prepared by using sulfuric acid hydrolysis method and characterized for particle sizes, functional groups, and surface morphologies by using XRD, FT-IR, and SEM instruments, respectively. The physicochemical properties of the collected WW were investigated. Next, both the prepared adsorbents were applied for the remediation of Cr (VI) ions from WW. The remediation processes is spontaneous and have higher remediation efficiencies of Cr (VI) ions from WW. The Cr (VI) ions remediation mechanism was evaluated from both the Cr (VI) ions adsorption isotherms and kinetic concepts. Both Langmuir and Freundlich Cr (VI) ions adsorption isotherm models were certainly fixed to a maximum Cr (VI) ions uptake capability (qmax) of 60.24 and 156.25 mg g−1 by CNM and S-CNM sorbents, respectively, and it follows pseudo-second-order (PSO) kinetics model through chemisorption processes. The Cr (VI) ions uptake capabilities were hindered by the presence of organic matter and any other competing pollutants in the WW. The S-CNM sorbent was selected for the regeneration study due to its higher efficiencies of remediation relative to CNM sorbent and the study was conducted through desorption of Cr (VI) ions by using HCl. Findings have shown that the sorbent was easily recyclable and applicable for the remediation of pollutants from real WW after consecutive 13th cycles.