Accurate prediction of fresh concrete slumps is a complex non-linear problem that depends on several parameters including time, temperature, and shear history. It is also affected by the mixture design and various concrete ingredients. This study investigates the efficiency of three novel integrative approaches for predicting this parameter. To this end, the vortex search algorithm (VSA), multi-verse optimizer (MVO), and shuffled complex evolution (SCE) are used to optimize the configuration of multi-layer perceptron (MLP) neural network. The optimal complexity of each model was appraised via sensitivity analysis. Various statistical metrics revealed that the accuracy of the MLP was increased after coupling it with the above metaheuristic algorithms. Based on the obtained results, the prediction error of the MLP was decreased by up to 17%, 10%, and 33% after applying the VSA, MVO, and SCE, respectively. Moreover, the SCE emerged as the fastest optimizer. Accordingly, the novel explicit formulation of the SCE-MLP was introduced as a capable model for the practical estimation of fresh concrete slump, which can assist in project planning and management.
Estimating the mechanical parameters of concrete is significant towards achieving an efficient mixture design. This research deals with concrete slump analysis using novel integrated models. To this end, four wise metaheuristic techniques of biogeography-based optimization (BBO), salp swarm algorithm (SSA), moth-flame optimization (MFO), and wind driven optimization (WDO) are employed to optimize a popular member of the neural computing family, namely multilayer perceptron (MLP). Four predictive ensembles are constructed to analyze the relationship between concrete slump and seven concrete ingredients including cement, water, slag, fly ash, fine aggregate, superplasticizer, and coarse aggregate. After discovering the optimal complexities by sensitivity analysis, the results demonstrated that the combination of metaheuristic algorithms and neural methods can properly handle the early prediction of concrete slump. Moreover, referring to the calculated ranking scores (RSs), the BBO-MLP (RS = 21) came up as the most accurate model, followed by the MFO-MLP (RS = 17), SSA-MLP (RS = 12), and WDO-MLP (RS = 10). Lastly, the suggested models can be promising substitutes to traditional approaches in approximating the concrete slump.
In a year, millions of forms of plastic are produced, and approximately, half of the generated plastics are used once only. Incorrect and insufficient management of these waste materials causes adverse effects on the nature of the soil, water, humans, and animals’ life. One type of waste plastic is metalized plastic waste (MPW), which is used mainly in different types of food packaging productions, and there is no appropriate technology for reusing it all over the world. In this paper, the effect of MPW as a fiber by 0.5% and 1% on compressive, flexural load capacity, and toughness of green concrete containing 7.5% and 15% silica fume or natural zeolite in Oman Sea tidal zone environment at 28, 90, and 180 days was investigated. The results indicate that by adding the MPW fiber, the compressive strength and maximum flexural load capacity of green concrete were decreased 25% and 15%, respectively. Meanwhile, the effect of MPW fiber on concrete containing 15% silica fume was greater than 7.5% silica fume concrete. Flexural toughness of natural zeolite concrete containing 0.5% MPW fiber was up to 510.9% greater than the observed one. Moreover, the toughness of green concrete containing 1% MPW fiber and zeolite was up to 35% greater than 0.5% MPW concrete. Meanwhile, the effect of MPW fiber on flexural toughness of concrete containing 15% natural zeolite was greater than 7.5% natural zeolite concrete.
1 June 2021 in International Journal of coastal and offshore engineering
In recent years, extensive studies have been conducted to ensure the safety and stability of concrete dams. The development of numerical methods in considering more factors affecting the response of dams and also increasing the accuracy of calculation methods has played an important role in ensuring the safety of concrete dams. Therefore, one of the most important points in the design and analysis of concrete dams is to predict the location of cracks, expand it, investigate the phenomenon of hydraulic failure, consider the pressure caused by the infiltration of reservoir water into cracks and joints in static and dynamic states, and find solutions prevention of dam destruction due to this phenomenon. In the study of the effect of tensile strength, with increasing tensile strength, the reservoir water level increases at the beginning of cracking and the final reservoir water level increases, but there is no linear relationship between tensile strength and the two responses. In general, in examining the refractive energy parameter in each of the states with and without taking into account the water pressure inside the crack, the results of the mentioned models are slightly different from each other, but comparing the results shows that in nonlinear analysis considering water pressure inside the crack failure energy change has a greater impact on the results of these models.