Mohammed Hamid Siddique

Dr. Mohammed Hamid Siddique

Research Professor
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2021 in Engineering Optimization
Verified
Journal Article
Closed access
AJAshutosh Kumar Jaiswal
Ashutosh Kumar Jaiswal
MSMohammed Hamid Siddique
Mohammed Hamid Siddique
Akshoy Ranjan PaulAkshoy Ranjan Paul
Akshoy Ranjan Paul
ASAbdus Samad
Abdus Samad
The input power to a centrifugal pump is optimized by changing the impeller blade exit angle. In the optimization, blade exit angles of three meridional profile layers are selected as the design variables, while pump shaft power and head developed are the multi-objective optimization functions obtained through a surrogate model. A multi-objective genetic algorithm is used to find the optimum design point. Computational fluid dynamics simulations are performed to solve Reynolds-averaged Navier–Stokes equations using a shear-stress transport turbulence model for the closure term. Manipulation of the impeller blade angle profile affects both shaft power and efficiency without affecting the head at the best efficiency point, corresponding to a mass flow rate of 1.75 kg/s. The optimum design point of the pump impeller shows an enhancement (>10%) in pump efficiency. Improved flow separation near the trailing edge of the impeller blade and uniform blade loading decreases the input power required at the shaft of the pump impeller.

5 August 2021 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
Verified
Journal Article
Closed access
PDF file
MSMohammed Hamid Siddique
Mohammed Hamid Siddique
ASAbdus Samad
Abdus Samad
SHShakhawat Hossain
Shakhawat Hossain
The shape of impeller blades of a centrifugal pump affects the best efficiency point (BEP), and splitter blades improve the pump performance at BEP. In this work, multiple parameters such as number of blades, length of splitter blade, splitter blade angle at hub, and wrap angle were modified to maximize head and minimize input power. The problem was solved by a numerical and experimental approach. Initially, an impeller was designed and tested in a laboratory setup. The same impeller was simulated in a computational fluid dynamics (CFD) solver, checked the accuracy of the CFD results, optimized by an in-house surrogate-based optimization code and finally the optimal designed manufactured and tested again. The mix and match of the splitter blade with the other parameters improved the pump performance i.e. head by 8.2% and overall efficiency by 3%. The improvement was due to the reduction in pressure fluctuations and uniform blade loading throughout the impeller blade span.

6 September 2022 in Machines
Verified
Journal Article
Open access
PDF file
BKBubRyur Kim
BubRyur Kim
MSMohammed Hamid Siddique
Mohammed Hamid Siddique
ASAbdus Samad
Abdus Samad
GHGang Hu
Gang Hu
Dong-Eun LeeDong-Eun Lee
Dong-Eun Lee
Pumping viscous fluids using centrifugal pumps in the subsea industry is very common. The pump performance degrades drastically when the viscosity of fluids increases, which ultimately gives rise to the installation and oil production cost. Their design optimization can lead to a significant improvement in their performance. Therefore, this study presented the effect of impeller geometry on pumping fluid viscosity through impeller design optimization. Here, pump operation is simulated numerically by solving the Reynolds-averaged Navier-Stokes (RANS) equations at different flowrates. Experimental testing is also performed using the same oils, for numerical validation. Artificial neural-network-assisted multiobjective optimization was performed with two independent design parameters; wrap angle and splitter blade length of impeller, with head and input power as objective functions. Wrap angle and splitter blade length, both significantly affect pump performance while pumping viscous oils; as the oil viscosity increases, increasing splitter length and decreasing wrap angle improve the head significantly.

20 January 2016 in Engineering Applications of Computational Fluid Mechanics
Verified
Journal Article
Open access
SBSayed Ahmed Imran Bellary
Sayed Ahmed Imran Bellary
RARohit Adhav
Rohit Adhav
MSMohammed Hamid Siddique
Mohammed Hamid Siddique
BCBo-Hyun Chon
Bo-Hyun Chon
FKFrank Kenyery
Frank Kenyery
ASAbdus Samad
Abdus Samad
To reduce the total design and optimization time, numerical analysis with surrogate-based approaches is being used in turbomachinery optimization. In this work, multiple surrogates are coupled with an evolutionary genetic algorithm to find the Pareto optimal fronts (PoFs) of two centrifugal pumps with different specifications in order to enhance their performance. The two pumps were used a centrifugal pump commonly used in industry (Case I) and an electrical submersible pump used in the petroleum industry (Case II). The objectives are to enhance head and efficiency of the pumps at specific flow rates. Surrogates such as response surface approximation (RSA), Kriging (KRG), neural networks and weighted-average surrogates (WASs) were used to determine the PoFs. To obtain the objective functions’ values and to understand the flow physics, Reynolds-averaged Navier–Stokes equations were solved. It is found that the WAS performs better for both the objectives than any other individual surrogate. The best individual surrogates or the best predicted error sum of squares (PRESS) surrogate (BPS) obtained from cross-validation (CV) error estimations produced better PoFs but was still unable to compete with the WAS. The high CV error-producing surrogate produced the worst PoFs. The performance improvement in this study is due to the change in flow pattern in the passage of the impeller of the pumps.

23 March 2023 in Results in Engineering
Verified
Journal Article
Open access
BKBubryur Kim
Bubryur Kim
MSMohammed Hamid Siddique
Mohammed Hamid Siddique
SBS.A.I. Bellary
S.A.I. Bellary
AAAbdulrahman Aljehani
Abdulrahman Aljehani
SCSe-Woon Choi
Se-Woon Choi
Dong-Eun LeeDong-Eun Lee
Dong-Eun Lee

21 June 2018 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
MSMohammed Hamid Siddique
Mohammed Hamid Siddique
AAArshad Afzal
Arshad Afzal
ASAbdus Samad
Abdus Samad
Low fidelity model assisted design optimization of turbomachines has reduced the total computational and experimental costs. These models are called surrogate models which mimic the actual experiments or simulations. The surrogate models can generate thousands of approximate results from a few samples, making it easy to locate the optimal solution. Ample articles reported surrogate assisted design optimization of centrifugal pumps. In this article, the authors try to give a brief overview of the surrogate based optimization technique along with its historical applications and trend of the recent use. The various key design parameters which affect the performance of the centrifugal pump have also been discussed. The effectiveness of the surrogate based optimization technique and corresponding performance metrics have been discussed.