A novel concept for integrating visible light communications (VLC) with three‐dimensional indoor positioning is presented. A VLC link based on transmitter and receiver characteristics using experimental measurements was modelled. Proposed is a three‐dimensional positioning algorithm using received signal strength indication, which changes based on the angle and distance of the location based service. To reduce inter‐cell interference, the transmitter's location code was sent using different subcarriers. A demonstration shows that the proposed algorithm can obtain a user's position, including height, accurately and without inter‐cell interference.

We propose a self-reverse-biased solar panel optical receiver for energy harvesting and visible light communication. Since the solar panel converts an optical component into an electrical component, it provides both energy harvesting and communication. The signal component can be separated from the direct current component, and these components are used for communication and energy harvesting. We employed a self-reverse-biased receiver circuit to improve the communication and energy harvesting performance. The reverse bias on the solar panel improves the responsivity and response time. The proposed system achieved 17.05 mbps discrete multitone transmission with a bit error rate of 1.1 x 10^-3 and enhanced solar energy conversion efficiency.

In a positioning system based on visible light communication, significant error occurs in localisation when the receiver has a tilt angle. The performance of the positioning system, which uses received signal strength and trilateration when Rx is tilted, has been researched and it is demonstrated that the estimated location changes in the same direction that the Rx is tilted and the shape of the estimated position is bent, theoretically and experimentally. The bent shape and error in an estimated position were compensated for by the multiplying weighting factor and by shifting the estimated position, respectively.

The authors propose a new high‐resolution indoor positioning method based on visible light communication using two light emitting diode (LED) lightings and an image sensor of camera as a receiver. Through the proposed method, the authors can determine position of receiver using the real coordinate of two LED lightings and a captured image. In order to demonstrate the applicability of positioning method, they evaluated the positioning accuracy as changing receiver position. From the experimental results, positioning resolution of maximum 3 cm distance error is demonstrated under the square space with 96 cm height and maximum 6.5 cm distance error under the square space with 245 cm height.

We proposed and experimentally demonstrated the reflective semiconductor optical amplifier (RSOA)-based wavelength-division-multiplexed passive optical network (WDM-PON) scheme where not only up/downlink data services but also broadcasting service could be provided using a single optical source. In the proposed scheme, the digital signal and subcarrier multiplexing (SCM) signal for downstream were simultaneously modulated by a single distributed feedback laser diode and RSOA in optical network unit remodulated downstream source as an upstream. Without performance deterioration of digital signals both in up- and downstream, the proposed WDM-PON scheme can stably offer the SCM signal for broadcasting service. In the experiment, 1-Gb/s digital signals both for up- and downstream and 20-Mb/s SCM signal at 2.2 GHz for broadcasting were demonstrated in 10-km bidirectional link

A flexible full-color micro-LED display with high mechanical robustness was fabricated by printing quantum dots (QDs) on a blue micro-LED array using standard photolithography. The red and green colors yielded from QDs exhibit a better color gamut than conventional color filters. The light conversion efficiency was enhanced by adding TiO₂ nanoparticles to the QD-photoresist composite. This full-color micro-LED display was successfully mounted on various unusual substrates such as curved glass, fabrics, and human skin, enabling diverse optoelectronic applications. In addition, wireless multi-channel visible light communication (VLC) based on the wavelength-division-multiplexing orthogonal-frequency-division-multiplexing (WDM-OFDM) technique was demonstrated using a QD-based color micro-LED panel. A high data transmission rate of 1.9 Gbps was successfully obtained owing to the high electrical–optical modulation bandwidth of the QD-based micro-LED panel.