Transformer failures have a significant cost impact on the operation of an electrical network. In many utilities, transformers have been operating for many years past their expected usable life. As power demand has surged, transformers in some areas are being loaded beyond their rated capacity to meet the demand. One of the vital components in a transformer is the on-load tap changer (OLTC), which regulates the voltage in the distribution network. This study aims to review several condition-monitoring techniques (online and offline) that can monitor the health of the OLTC and assure the safety of the transformer’s OLTC from irreparable damage by detecting the defect at an earlier stage, which is preceded by the specification of typical faults. This paper also discussed the common faults of the OLTC and the root causes of these faults. The OLTC is prone to mechanical faults due to its frequently changing mechanism in the tap operation. The OLTC are also prone to oil as well as thermal faults. As a result, it is critical to monitor OLTC conditions while they are in use. Proper management of condition monitoring (CM) for the OLTC is useful and necessary to increase availability and achieve optimised operating. Condition monitoring (CM) and diagnostics methods (DM) have been developing since the 1950s. CM and DM have been implemented to diagnose and detect an incipient fault, especially for the OLTC. Many techniques, online and offline, are being used to monitor the condition of the OLTC to prevent failure and minimize outages. These DM and CM will prolong the operational cycle and avoid a major disaster for the OLTC, which is an unfavorable scenario.

Nanofluids offer great potential heat transfer enhancement and provide better thermophysical properties than conventional heat transfer fluids. Application of nanofluids in jet impingement cooling is used for many industrial and scientific purposes as it manages to effectively remove high localized heat. Owing to its tremendous improvement of the heat transfer field, the use of nanofluids in jet impingement cooling has caught the attention of many researchers. This paper reviews previous research and recent advancements of nanofluid jet impingement via both experimental and numerical studies. In experimental approaches, Al₂O₃-water nanofluids are the most used working fluids by researchers, and most experiments were conducted with conventional impinging jets. As for the numerical approach, the single-phase model was the preferred model over the two-phase model in obtaining numerical solutions, due to the lower computational time required. A deep insight is provided into nanofluid preparation and methods for stabilization. Parameters affecting the performance of the jet impinging system are also investigated with comparison to numerous publications. The main parameters for jet impinging include the jet-to-plate distance (H/D), the shape of the impinged plate (curved, flat or concave), nozzle configurations and the twisted tape ratio. Studies on conventional impinging jets (CIJs), as well as swirling impinging jets (SIJs), are presented in this paper.

Nanofluids have become increasingly salient in heat transfer applications due to their promising properties that can be tailored to meet specific needs. The use of nanofluids in jet impingement flows has piqued the interest of numerous researchers owing to the significant heat transfer enhancement, which is vital in the technological dependence era in every aspect of life, particularly in engineering applications and industry. The aim of this current work is to investigate the effect of hybrid nanofluids concentration and swirling flow on jet impingement cooling through experimental approach. The hybrid nanofluids are prepared through a two-step method and the characterization process is carried out to study the stability and morphological structure of the sample prepared. The prepared hybrid nanofluids are then used as a cooling agent to evaluate the heat transfer performance of jet impinging system. The experimental investigation compares the performance of swirling impinging jets (SIJs) with conventional impinging jets (CIJs) under various jet-to-plate distance (H/D) ratios and nanofluid concentrations. The effects of adding surfactant on nanofluids are also examined. The heat transfer performance of ZnO/water and CuO/water mono-nanofluids are used as comparison to ZnO-CuO/water hybrid nanofluid. The results show that the thermal performance of ZnO-CuO/water hybrid nanofluid is better than that of the mono-nanofluids. Furthermore, as the mass fraction increases, the heat transfer rates improve. The effect of heat transmission by swirling impinging jets is better than that of conventional impinging jets under similar operating conditions. At H/D = 4, Re = 20,000 and hybrid nanofluid concentration at 0.1% under SIJ is observed to have the highest overall Nusselt number.

MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry