Hassan Ghanem

Dr. Hassan Ghanem

Beirut Arab University
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2024 in Materials
Verified
Journal Article
Open access
PDF file
HGHassan Ghanem
Hassan Ghanem
RRRawan Ramadan
Rawan Ramadan
Jamal M. KhatibJamal M. Khatib
Jamal M. Khatib
Adel Ahmed ElkordiAdel Ahmed Elkordi
Adel Ahmed Elkordi
Chemical shrinkage (CS) is an intrinsic parameter that may affect the early age cracking of paste, mortar and concrete. It is well known as the driving force of self-desiccation, autogenous shrinkage (AGS) and drying shrinkage. During the first stage of cement hydration (at the initial setting time), the CS and AGS are equal. In the hardened stages, there is a difference in values between the two shrinkage parameters. This paper is a comprehensive review on CS and AGS, measurement techniques, modeling and prediction of different cementitious systems. Based on the various experimental studies, chemical shrinkage depends on the water to binder ratio (w/b) and is proportional to the degree of hydration. A low w/b ratio leads to high CS and AGS. The composition of cement has an effect on both CS and AGS. Also, incorporating supplementary cementitious materials (SCMs) affects both shrinkage parameters. It is concluded that adding fly ash (FA) to concrete contributes to CS and AGS reductions. However, this is not the case when concrete contains slag. More than 170 references were consulted including 35 which were published after 2020. According to the authors knowledge, there is no published work on the effect of fibers, especially bio-fibers, on the chemical shrinkage of cement-based composites. Therefore, in addition to traditional chemical shrinkage of cementitious systems, this review includes a section on recent papers conducted by the authors on the effect of bio-fibers on the chemical shrinkage of cement composites.

19 August 2021 in Buildings
Verified
Journal Article
Open access
PDF file
Jamal M. KhatibJamal M. Khatib
Jamal M. Khatib
RRRAWAN RAMADAN
RAWAN RAMADAN
HGHassan Ghanem
Hassan Ghanem
Adel Ahmed ElkordiAdel Ahmed Elkordi
Adel Ahmed Elkordi
The common cause of cracking in cement paste is shrinkage due to different reasons, such as loss of water and chemical reactions. Incorporating limestone fines (LF) as a cement replacement can affect the shrinkage of the paste. To examine this effect, five paste mixes were prepared with 0, 5, 10, 15 and 20% LF as a cement replacement and with a water-to-binder ratio (w/b) of 0.45. Four volume stability tests were conducted for each paste: chemical, autogenous and drying shrinkage and expansion. Chemical shrinkage was tested each hour for the first 24 h and thereafter every 2 days for a total period of 90 days. The drying shrinkage, autogenous shrinkage and expansion were monitored every 2 days until 90 days. The results showed that replacing 15% LF enhanced the chemical shrinkage of the paste. However, autogenous shrinkage of the paste was found to increase between 0 and 10% LF and decline sharply at 15 and 20% LF. Drying shrinkage was found to increase with the increase in LF content. Expansion exhibited little variation between 0 and 10% LF and an increase for replacement above 15% LF. These results are discussed in terms of the formation of hydration products and self-desiccation due to hydration.

30 January 2024 in Fibers
Verified
Journal Article
Open access
PDF file
Jamal M. KhatibJamal M. Khatib
Jamal M. Khatib
RRRawan Ramadan
Rawan Ramadan
HGHassan Ghanem
Hassan Ghanem
Adel Ahmed ElkordiAdel Ahmed Elkordi
Adel Ahmed Elkordi
In this research, the investigation focuses on the influence of Phragmites-Australis (PA) fibers on the mechanical properties and volume stability of mortar. A total of four mixtures were employed with varying amounts of locally sourced PA fibers ranging from 0.5% to 2% (by volume). Testing includes flexural strength, compressive strength, chemical shrinkage, drying shrinkage, autogenous shrinkage, and expansion. The findings show that the use of PA fibers caused a reduction in compressive and flexural strength. However, beyond 3 days of curing, an increase in flexural strength ranging from 7 to 21% was observed at 1% PA fiber compared to the control sample. Furthermore, the addition of PA fibers up to 2% effectively mitigates the dimensional stability of mortar samples. A gradual decrease in chemical, autogenous, and drying shrinkage as well as expansion occurs in mortar samples when % of PA fibers increases. At 180 days, this reduction was 37, 19, 15 and 20% in chemical shrinkage, autogenous shrinkage, drying shrinkage, and expansion, respectively, for a mix containing 2% PA fiber. Additionally, a hyperbolic model is proposed to predict the variation of length change with time. Also, a strong relationship is observed between chemical shrinkage and other length change parameters. Consequently, the environmentally friendly utilization of PA fibers demonstrates its potential to significantly enhance mortar durability in construction applications.

31 July 2010 in Construction and Building Materials
Verified
Journal Article
Closed access
HGHassan Ghanem
Hassan Ghanem
DZDan Zollinger
Dan Zollinger
RLRobert Lytton
Robert Lytton

26 March 2024 in International Journal of Building Pathology and Adaptation
Verified
Journal Article
Closed access
RRRawan Ramadan
Rawan Ramadan
HGHassan Ghanem
Hassan Ghanem
Jamal M. KhatibJamal M. Khatib
Jamal M. Khatib
AEAdel M. ElKordi
Adel M. ElKordi
Purpose: The purpose of this paper is to check the feasibility of using biomaterial such as of Phragmites-Australis (PA) in cement paste to achieve sustainable building materials.Design/methodology/approach: In this study, cement pastes were prepared by adding locally produced PA fibers in four different volumes: 0%, 0.5%, 1% and 2% for a duration of 180 days. Bottles and prisms were subjected to chemical shrinkage (CS), drying shrinkage (DS), autogenous shrinkage (AS) and expansion tests. Besides, prism specimens were tested for flexural strength and compressive strength. Furthermore, a mathematical model was proposed to determine the variation length change as function of time.Findings: The experimental findings showed that the mechanical properties of cement paste were significantly improved by the addition of 1% PA fiber compared to other PA mixes. The effect of increasing the % of PA fibers reduces the CS, AS, DS and expansion of cement paste. For example, the addition of 2% PA fibers reduces the CS, expansion, AS and DS at 180 days by 36%, 20%, 13% and 10%, respectively compared to the control mix. The proposed nonlinear model fit to the experimental data is appropriate with R2 values above 0.92. There seems to be a strong positive linear correlation between CS and AS/DS with R2 above 0.95. However, there exists a negative linear correlation between CS and expansion.Research limitations/implications: The PA used in this study was obtained from one specific location. This can exhibit a limitation as soil type may affect PA properties. Also, one method was used to treat the PA fibers.Practical implications: The utilization of PA fibers in paste may well reduce the formation of cracks and limit its propagation, thus using a biomaterial such as PA in cementitious systems can be an environmentally friendly option as it will make good use of the waste generated and enhance local employment, thereby contributing toward sustainable development.Originality/value: To the authors best knowledge, there is hardly any research on the effect of PA on the volume stability of cement paste. Therefore, the research outputs are considered to be original.

28 November 2022 in Buildings
Verified
Journal Article
Open access
PDF file
HGHassan Ghanem
Hassan Ghanem
SCSafwan Abdul Kader Chahal
Safwan Abdul Kader Chahal
Jamal M. KhatibJamal M. Khatib
Jamal M. Khatib
Adel Ahmed ElkordiAdel Ahmed Elkordi
Adel Ahmed Elkordi
The production of plastic material continues to increase around the world. Consequently, large amount of waste plastic is generated. This will lead to environmental concern due to its disposal. In order to reduce the environment effects and cost, waste plastic can be recycled and utilized in other applications including construction. This paper investigated the flexural behavior of non-structural concrete beams containing waste plastic meshes as a replacement of traditional steel reinforcement. To achieve this objective, beams with steel reinforcing bars and waste plastic sheets with different effective widths and patterns were prepared. After 28 days of curing, the beams were subjected to an increasing load until failure and the central deflection was measured at each load increment. Furthermore, a numerical analysis was performed on the specimens using ABAQUS software. This will allow the comparison between the experimental and numerical results. The experimental data indicated that using plastic sheets improved the flexural toughness and ductility of concrete beams. Additionally, correlations were carried out between the ultimate capacity of the beams, the flexural toughness and the effective width of the plastic meshes. As the effective mesh width increased, the flexural toughness and ultimate capacity of the concrete beams increased. The results of this investigation will allow greater utilization of waste plastic in construction activities.