This paper presents an analytical solution for the thermomechanical buckling of functionally graded material (FGM) sandwich plates. The solution is obtained using a four-variable equivalent-single-layer (ESL) plate theory. Two types of sandwich plates are included: one with FGM facesheets and homogeneous core, and vice versa for the other. The governing equations are derived based on the principle of minimum total potential energy. For simply supported boundary conditions, these equations are solved via the Navier method. The results on critical buckling load and temperature increment of simply supported FGM sandwich plates are compared with the available solutions in the literature. Several results are presented considering various material and geometrical parameters as well as their effect on the thermomechanical buckling response of FGM sandwich plates. The relationship between the mechanical load and the temperature increment for uniform/linear temperature rise of FGM sandwich plates under combined mechanical and thermal loads is studied.
In this study, the thrust performance of a staggered rotor system in-ground effect (IGE) and out-of-ground effect (OGE) while considering the interaction on wake characteristics were investigated experimentally. A thorough comprehension of their performance holds significant importance for trajectory planning, aircraft design, landing safety, and energy-efficient landings. The complex interactions within staggered rotor systems and the impact of ground effects make rotor distance and ground interactions critical factors influencing near-ground flight performance. The study investigated the influence and enhancements of rotor thrust performance through an examination of rotor speed, lateral distance, and altitude. Experimental tests were conducted on two small-scale rotor models to assess the effects of these parameters. These experiments compared the performance of staggered rotor systems with isolated rotors, analyzing the competition mechanism between the thrust loss caused by interference and the thrust gain of rotors IGE. Furthermore, emphasis was placed on analyzing the thrust gain issues exhibited by staggered rotor systems under the condition of H = 2R. Additionally, the analysis was focused on identifying prominent relative positions for thrust performance and parameters for improving thrust performance in ground effects in staggered rotor systems.
A lack of specificity is restricting the further application of conotoxin from Conus bullatus (BuIA). In this study, an analogue library of BuIA was established and virtual screening was used, which identified high α7 nicotinic acetylcholine receptor (nAChR)-selectivity analogues. The analogues were synthesized and tested for their affinity to functional human α7 nAChR and for the regulation of intracellular calcium ion capacity in neurons. Immunofluorescence, flow cytometry, and patch clamp results showed that the analogues maintained their capacity for calcium regulation. The results of the hot-plate model and paclitaxel-induced peripheral neuropathy model indicated that, when compared with natural BuIA, the analgesia activities of the analogues in different models were maintained. To analyze the adverse effects and toxicity of BuIA and its analogues, the tail suspension test, forced swimming test, and open field test were used. The results showed that the safety and toxicity of the analogues were significantly better than BuIA. The analogues of BuIA with an appropriate and rational mutation showed high selectivity and maintained the regulation of Ca2+ capacity in neurons and activities of analgesia, whereas the analogues demonstrated that the adverse effects of natural α-conotoxins could be reduced.
In recent years, the demand for Urban Air Mobility (UAM) and Micro Aerial Vehicles (MAVs) has driven the emergence of new aircraft designs, with the Staggered Rotor System being widely applied in these vertical take-off and landing aircraft. Due to the complex aerodynamic interference between rotors, the spacing between them has a significant impact on the performance of these new aircraft configurations. A testbed was designed and validated to investigate the effects of parameters such as axial distance and lateral distance between rotors on the thrust performance of the Staggered Rotor System. A series of systematic thrust tests was conducted on two co-rotating small-scale rotor models, with particular focus on thrust testing of individual rotors in isolation and their comparison to the conditions of the Staggered Rotor System. During the experimental process, as both the axial and lateral distance varied, an orthogonal experimental design was employed to assess the influence of aerodynamic interactions caused by different rotor diameters on rotor performance. This study conducts an analysis of experimental data to investigate the influence of these factors on the performance of rotor systems’ thrust, while also examining the aerodynamic interference and aerodynamic force evolution patterns of rotor systems under varying parameters. Furthermore, rotor speed also plays a crucial role in the performance of the system. Therefore, when designing vertical take-off and landing aircraft with multiple rotors, it is essential to consider the influence of these factors during the optimization process.