Vehicular Ad Hoc Network (VANET) is a collection of vehicles and associated road side infrastructure, which is able to provide mobile wireless communication services. This highly dynamic topology structure is still open to many routing and message forwarding challenges. This paper addresses the issue of message delivery from vehicle to a fixed destination, by hopping over neighboring vehicles. We propose a reinforcement learning based hierarchical protocol called QGrid to improve the message deliver ratio with minimum possible delay and hops. The protocol works at two levels. Firstly, it divides the geographic area into smaller grids and finds the next optimal grid towards the destination. Secondly, it discovers a vehicle inside or moving towards the next optimal grid for message relaying. There is no need of routing tables as the protocol builds a Q-value table based on traffic flow in neighbor grids, which is then used for grid selection. The vehicle selection process can employ different strategies, like, greedy selection of nearest neighbor, or solution based on two-order Markov chain prediction of neighbor movement. This combination makes QGrid an offline and online solution. QGrid is further improved giving higher priority to vehicles with fixed routes and better communication capabilities, like buses, when making the vehicle selection. We have carried out extensive simulation evaluation by using real-world vehicular traces to measure the performance of our proposed schemes. The simulation comparisons among QGrid with/without bus-aid, and existing position based routing protocols, show the great improvement in delivery percentage by our proposed routing protocol.

This paper explores the limits of acoustic ranging on smart phone in the scenario of device-free hand tracking. Tracking the hand is challenging since it requires continuously locating the moving hand in the air with fine resolution. Existing work on hand tracking relies on special hardware or requires users hold the mobile device. This paper presents EchoTrack, which continuously locates the hand by leveraging mobile audio hardware advances without special infrastructure supported. EchoTrack measures the distance from the hand to the speaker array embedded in smart phone via the chirp's Time of Flight (TOF). The speaker array and hand yield a unique triangle. The hand can be located with this triangular geometry. The trajectory accuracy can be improved with the method of Doppler shift compensation and trajectory correction (i.e., roughness penalty smoothing method). We implement a prototype on smart phone and the evaluation shows that EchoTrack can achieve tracking accuracy within about three centimeters of 76% and two centimeters of 48%.

Arterial blood pressure (ABP) monitoring using wearables has emerged as a promising approach to empower users with self-monitoring for effective diagnosis and control of hypertension. However, existing schemes mainly monitor ABP at discrete time intervals, involve some form of user effort, have insufficient accuracy, and require collecting sufficient training data for model development. To tackle these problems, we propose Crisp-BP, a novel ABP monitoring system leveraging the PPG sensor available in commercial wrist-worn devices (e.g., smartwatches or fitness trackers). It enables continuous, accurate, user-independent ABP monitoring and requires no behavior changes during collecting PPG data. The basic idea is to illuminate a skin/tissue, measure the light absorption, and characterize ABP-related blood volume change in the artery. To obtain accurate measurements and relieve the pain of training data collection, we use an arterial pulse extraction method that removes interference caused by capillary pulses. Moreover, we design a contact pressure estimation method to combat the deficiency of PPG waveform being sensitive to the contact pressure between the sensor and the skin. In addition, we leverage the great power of Bidirectional Long Short Term Memory and design a hybrid neural network model to enable user-independent ABP monitoring, so that users do not have to provide training data for model development. Furthermore, we propose a transfer learning method that first extracts general knowledge from online PPG data, then use it to improve the learning of a new model on our target problem. Extensive experiments with 35 participants demonstrate that Crisp-BP obtains the average estimation error of 0.86 mmHg and 1.67 mmHg and the standard deviation error of 6.55 mmHg and 7.31 mmHg for diastolic pressure and systolic pressure, respectively. These errors are within the acceptable range regulated by the FDA's AAMI protocol, which allows average errors of up to 5 mmHg and a standard deviation of up to 8 mmHg. Our results demonstrate that Crisp-BP is promising for improving the diagnosis and control of hypertension as it provides continuousness, comfort, convenience, and accuracy.

The rapid advancement of mobile edge computing (MEC) networks has enabled the augmentation of the computational power of mobile devices (MDs) by offloading computationally intensive tasks to resource-rich edge nodes. This paper discusses the decision-making process for task offloading and resource allocation among multiple mobile devices connected to a base station. The primary objective is to minimize the time taken to complete tasks while simultaneously reducing energy consumption on the device under a time-varying wireless fading channel. This objective is formulated as an energy-efficiency cost (EEC) minimization problem, which cannot be solved by conventional methods. To address this challenge, we propose a dynamic offloading decision algorithm of dependent tasks (DODA-DT) that adjusts local task execution based on edge node status. The proposed algorithm facilitates fair competition among all devices for edge resources. Additionally, we use a deep reinforcement learning (DRL) algorithm based on an actor-critic learning structure to train the system to quickly identify near-optimal solutions. Numerical simulations demonstrate that the proposed algorithm effectively reduces the total cost of the task in comparison to previous algorithms.

With the rapid development of mobile devices and the fast increase of sensitive data, secure and convenient mobile authentication technologies are desired. Except for traditional passwords, many mobile devices have biometric-based authentication methods (e.g., fingerprint, voiceprint, and face recognition), but they are vulnerable to spoofing attacks. To solve this problem, we study new biometric features which are based on the dental occlusion and find that the bone-conducted sound of dental occlusion collected in binaural canals contains unique features of individual bones and teeth. Motivated by this, we propose a novel authentication system, TeethPass, which uses earbuds to collect occlusal sounds in binaural canals to achieve authentication. We design an event detection method based on spectrum variance and double thresholds to detect bone-conducted sounds. Then, we analyze the time-frequency domain of the sounds to filter out motion noises and extract unique features of users from three aspects: bone structure, occlusal location, and occlusal sound. Finally, we design an incremental learning-based Siamese network to construct the classifier. Through extensive experiments including 22 participants, the performance of TeethPass in different environments is verified. TeethPass achieves an accuracy of 96.8% and resists nearly 99% of spoofing attacks.

Inputting a pattern or PIN code on the touch screen is a popular method to prevent unauthorized access to mobile devices. However, these sensitive tokens are highly susceptible to being inferred by various types of side-channel attacks, which can compromise the security of the private data stored in the device. This paper presents a second-factor authentication method, TouchPrint, which relies on the user's hand posture shape traits (dependent on the individual different posture type and unique hand geometry biometrics) when the user inputs PIN or pattern. It is robust against the behavioral variability of inputting a passcode and places no restrictions on input manner (e.g., number of the finger touching the screen, moving speed, or pressure). To capture the spatial characteristic of the user's hand posture shape when input the PIN or pattern, TouchPrint performs active acoustic sensing to scan the user's hand posture when his/her finger remains static at some reference positions on the screen (e.g., turning points for the pattern and the number buttons for the PIN code), and extracts the multipath effect feature from the echo signals reflected by the hand. Then, TouchPrint fuses with the spatial multipath feature-based identification results generated from the multiple reference positions to facilitate a reliable and secure MFA system. We build a prototype on smartphone and then evaluate the performance of TouchPrint comprehensively in a variety of scenarios. The experiment results demonstrate that TouchPrint can effectively defend against the replay attacks and imitate attacks. Moreover, TouchPrint can achieve an authentication accuracy of about 92% with only ten training samples.