Helitha Hiranya Nilmalgoda

Mr. Helitha Hiranya Nilmalgoda

Biosystems Technology, Sabaragamuwa University of Sri Lanka, Ratnapura, Sabaragamuwa, Sri Lanka
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2025 in Energies
Verified
Journal Article
Open access
PDF file
AIAshan Induranga
Ashan Induranga
CGchanaka pradeep galpaya
chanaka pradeep galpaya
VVVimukthi Vithanage
Vimukthi Vithanage
ASAmalka Indupama Samarathunga
Amalka Indupama Samarathunga
Kaveendra MaduwanthaKaveendra Maduwantha
Kaveendra Maduwantha
KKKaveenga Koswattage
Kaveenga Koswattage
Nanofluids, fluids with different suspended nanoparticles, have shown improved thermo-physical properties in recent research outputs, and they have emerged as promising alternatives for the industrial fluids used in numerous heat exchange applications. Much research has been conducted around the world to develop heat transfer fluids with optimum thermo-physical properties with the help of nanotechnology, especially in the 21st century. Following the latest research outcomes, nanofluids with base fluids of industrially used coolants, such as water, engine oil, transformer oil, electronic coolants, etc., have shown imposing thermo-physical properties compared to their base fluid. Identifying the nanofluids with high performances and lesser practical obstacles to be used as heat transfer fluids is vital. This paper reviews the thermo-physical property improvements of nanofluid properties, such as thermal conductivity, viscosity, density, specific heat capacity, and flash point, along with their theoretical models. Recent studies on using surfactants to improve the stability of nanofluids are also included in this review. The next part of the study reviews the latest research outputs on the thermo-physical properties of nanofluids in applications in engineering disciplines. Later, research on molecular dynamics simulations of nanofluids are discussed. As the final section, this paper presents Nanofluid research related to neural network modeling. Cumulatively, this paper presents a comprehensive review of recent nanofluids research, along with theoretical developments. This review is a cumulative study of the recent studies of nanofluid research in different disciplines. Most of the recent reviews focused on specific applications of nanofluids and do not cover the field from the basics of the nanofluids to their applications. However, this review covers all the aspects of the nanofluid field, along with several important engineering applications.

5 May 2025 in Agriengineering
Verified
Journal Article
Open access
PDF file
Lasitha MadhusankaLasitha Madhusanka
Lasitha Madhusanka
Helitha Hiranya NilmalgodaHelitha Hiranya Nilmalgoda
Helitha Hiranya Nilmalgoda
Isuru Bandara WijethungaIsuru Bandara Wijethunga
Isuru Bandara Wijethunga
Asanga D. AmpitiyawattaAsanga D. Ampitiyawatta
Asanga D. Ampitiyawatta
KKKaveenga Koswattage
Kaveenga Koswattage
This study investigates the production of biomass briquettes using waste coconut shell charcoal and cinnamon sawdust, bound by eco-friendly, non-edible binders: cassava peel starch, giant taro starch, and pine resin. The production process involved carbonization of coconut shells, followed by crushing, blending with sawdust, pressing, and a 12-day sun-drying period. The briquettes were tested for calorific value, density, compressive strength, and shatter resistance. The calorific values ranged from 26.07–31.60 MJ/kg, meeting the industrial standards, while densities varied between 0.83 g/cm3 and 1.14 g/cm3, ensuring compactness and efficient combustion. Among the binders, cassava peel starch provided the best bonding strength, resulting in high-density briquettes with superior durability and energy release, showing a calorific value and compressive strength of 2.11 MPa. Giant taro starch also improved durability, though with slightly lower calorific values but better bonding than pine resin. Pine resin, while contributing to high calorific values, reduced compressive strength with increased resin content, making it less suitable for high mechanical strength applications. Proximate analysis revealed that cassava peel starch-based briquettes had moisture content from 6.5% to 8.6%, volatile matter from 15.2% to 23.5%, ash content from 2.1% to 3.2%, and fixed carbon between 69% and 76.2%. Giant taro starch-based briquettes exhibited 63.2% to 75% fixed carbon, while pine resin-based briquettes had the highest fixed carbon content (66.4% to 78.3%), demonstrating the potential of non-edible adhesives for sustainable, high-performance fuel production.

21 January 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
KPKasun Pathiraja
Kasun Pathiraja
Helitha Hiranya NilmalgodaHelitha Hiranya Nilmalgoda
Helitha Hiranya Nilmalgoda
Isuru Bandara WijethungaIsuru Bandara Wijethunga
Isuru Bandara Wijethunga
KKKaveenga Koswattage
Kaveenga Koswattage
Many industries use synthetic rubber for various industrial purposes; thus, disposal of synthetic waste rubber into the environment causes huge environmental problems. A feasibility study to convert synthetic Nitrile Butadiene Rubber (NBR) waste into valuable products using batch-type slow pyrolysis will benefit small- to medium-scale industries in their waste handling. The main objective of this research was to find sustainable waste management and energy solutions for synthetic NBR waste using pyrolysis technology. This study employed a two-phase experimental approach where the first five preliminary experiments were conducted to assess the thermal decomposition behavior of NBR waste. In the second phase, three experiments were conducted to quantify the yields of pyrolysis products: pyrolysis oil, solid char, and syngas. The results reveal that the weight distribution of pyrolysis oil, solid char, and syngas was 39.00%, 42.91%, and 18.09%, respectively. Moreover, density, heating value, flash point, and viscosity were analyzed to investigate the quality of the pyrolysis oil, where it was found to be 972.50 kg/m3, 42.50 MJ/kg, 36.50 °C, and 25.44 cP, respectively. Analysis of the syngas composition revealed that carbon monoxide, carbon dioxide, methane, hydrogen, oxygen, and CnHm were 14.14%, 5.04%, 18.69%, 11.08%, 0.02%, and 10.00%, respectively. The heating value of syngas was 3873.70 Kcal/m3. The carbon footprint analysis indicated that a significant reduction is possible in greenhouse gas emissions compared to conventional incineration. Additionally, a cost benefit analysis highlighted the superior cost effectiveness of pyrolysis over incineration of NBR waste. These findings underscore the potential of pyrolysis as an effective tool for sustainable waste management and energy recovery solutions.

26 May 2023 in Agriengineering
Verified
Journal Article
Open access
PDF file
SDSusanthika Dhanapala
Susanthika Dhanapala
Helitha Hiranya NilmalgodaHelitha Hiranya Nilmalgoda
Helitha Hiranya Nilmalgoda
MGMiyuru Gunathilake
Miyuru Gunathilake
Upaka RathnayakeUpaka Rathnayake
Upaka Rathnayake
Eranga M. WimalasiriEranga M. Wimalasiri
Eranga M. Wimalasiri
The energy in agricultural systems is two-fold: transformation and utilization. The assessment and proper use of energy in agricultural systems is important to achieve economic benefits and overall sustainability. Therefore, this study was conducted to evaluate the energy balance of crop and livestock production, net energy ratio (NER), and water use efficiency (WUE) of crops of a selected farm in Sri Lanka using the life cycle assessment (LCA) approach. In order to assess the diversification, 18 crops and 5 livestock types were used. The data were obtained from farm records, personal contacts, and previously published literature. Accordingly, the energy balance in crop production and livestock production was −316.87 GJ ha−1 Year−1 and 758.73 GJ Year−1, respectively. The energy related WUE of crop production was 31.35 MJ m−3. The total energy balance of the farm was 736.2 GJ Year−1. The results show a negative energy balance in crop production indicating an efficient production system, while a comparatively higher energy loss was shown from the livestock sector. The procedure followed in this study can be used to assess the energy balance of diversified agricultural systems, which is important for agricultural sustainability. This can be further developed to assess the carbon footprint in agricultural systems.

12 June 2025 in Challenges
Verified
Journal Article
Open access
PDF file
ICIndunil Chamara
Indunil Chamara
Helitha Hiranya NilmalgodaHelitha Hiranya Nilmalgoda
Helitha Hiranya Nilmalgoda
Eranga M. WimalasiriEranga M. Wimalasiri
Eranga M. Wimalasiri
The increasing demand for fossil fuels has led the oil industry to explore biodiesel as a renewable alternative, which is crucial for advancing planetary health. Biodiesel offers environmental benefits and shares similar properties with petroleum diesel, making it a promising substitute. However, Palm Oil Mill Effluent (POME), containing sludge palm oil (SPO), presents challenges due to its high free fatty acid (FFA) content. This study proposes novel optimization strategies to reduce FFAs in SPO and improve biodiesel yield. A combination of base neutralization, esterification, and transesterification processes was employed. Neutralization with sodium hydroxide (NaOH) at concentrations ranging from 0.1% to 0.5% w/w was followed by esterification using sulfuric acid (H2SO4) with varying methanol-to-oil ratios. The optimal FFA reduction of 2.26% was achieved at a 6:1 methanol ratio. Transesterification with a 7:1 methanol-to-oil ratio yielded the highest biodiesel output of 71.25%. The biodiesel met ASTM standards, with a calorific value of 40.01 MJ/kg, a flash point of 180.5 °C, and a density of 0.86 g/cm3. Economic analysis estimates an annual net profit of USD 244,901,600, demonstrating that this approach provides a financially viable solution while advancing planetary health by reducing dependency on fossil fuels, mitigating climate change, and supporting sustainable fuel production.

1 July 2025 in Biomass
Verified
Journal Article
Open access
PDF file
Helitha Hiranya NilmalgodaHelitha Hiranya Nilmalgoda
Helitha Hiranya Nilmalgoda
KBK.M.J.K.Bandara Jayashan Bandara
K.M.J.K.Bandara Jayashan Bandara
Isuru Bandara WijethungaIsuru Bandara Wijethunga
Isuru Bandara Wijethunga
Asanga D. AmpitiyawattaAsanga D. Ampitiyawatta
Asanga D. Ampitiyawatta
KKKaveenga Koswattage
Kaveenga Koswattage
This study investigates biochar-enriched organic fertilizers made from bagasse, ash, spent wash, and cane tops, assessing their impact on corn growth over 45 days. A randomized complete block design with three replicates was used, testing six formulations with biochar levels at 0%, 10%, and 20%, along with soil-only and commercial fertilizer controls. Treatments T5 (bagasse + ash + spent wash + cane tops), T11 (T5 + 10% biochar), and T17 (T5 + 20% biochar) showed the best results for plant height, leaf development, and biomass production, with T17 performing the best for growth, biomass, and girth. The biochar in T17 had a pH of 9.37 ± 0.16, 18.00 ± 1.25% ash content, and a surface area of 144.58 m2/g. Nutrient analysis of the compost showed 2.85% potassium, 1.12% phosphorus, 1.85% nitrogen, 4.1% calcium, 0.23% magnesium, and 130 mg/kg zinc. The elemental composition was 68.50% carbon, 4.50% hydrogen, 6.00% nitrogen, and 25.30% oxygen, with 85.00% total organic carbon (TOC). This study concludes that T17 is the most effective formulation, offering both environmental and financial benefits, with composting potentially generating $11.16 million in profit, compared to the $19.32 million spent annually on waste management in Sri Lanka’s sugar industry.