Ho-Jeong  Kim

Prof. Ho-Jeong Kim


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2019 in Sustainability
Verified
Journal Article
Open access
PDF file
HKHo-Jeong Kim
Ho-Jeong Kim
CYChang-Seok Yang
Chang-Seok Yang
HMHyeun Jun Moon
Hyeun Jun Moon
This study presents a multi-objective parametric design tool for four-axis surround-type movable shading device using solar position tracking in Seoul, South Korea. In order to explore large numbers of possible forms of shades, generic algorithms are utilized with real-time simulation of the performative criteria such as solar radiation, daylight glare probability (DGP), and solar shielding rate on window surface. This study outlines a workflow using a multi-objective engine called Octopus that runs within Grasshopper 3D, a parametric design tool, in addition to environmental performance simulation plug-in Ladybug. The workflow utilizes a performance-based design tool, which allows the designer to explore, sort, and filter solutions, and visually compare alternative solutions in terms of energy saving and indoor daylight quality in order to determine the optimal form of shade changing its shape every one hour. The result of deriving and analyzing the optimal shade shape through the genetic algorithm proposed in this study is as follows: On the one hand, on the summer solstice, shade shapes with shielding areas of almost 100% should be derived to achieve the most effective reduction of the direct solar radiation. The proposed movable shading device reduced direct solar radiation by 52.40% and 57.20% in the south- and east-facing windows, respectively. On the other hand, in winter when solar heat gain is important, the absence of sunshade is optimal in terms of heating load. However, in order to improve the indoor light environment, it is confirmed that it is possible to derive a certain shape of sunshade according to the sun’s trajectory. On the winter solstice, the problem of glare arises from 10:00 to 15:00 in the south and 10:00 in the east. Therefore, the proposed four-axis movable shading device can be configured to have a minimum protrusion length satisfying DGP less than 0.35 in winter.

30 December 2021 in Journal of Asian Architecture and Building Engineering
Verified
Journal Article
Open access
HKHo-Jeong Kim
Ho-Jeong Kim
WCWoo-Seok Choi
Woo-Seok Choi
JKJi-Won Kim
Ji-Won Kim
This study developed a design tool intended to suggest mass forms that can satisfy the standard of two consecutive sunlight hours on the winter solstice and achieve the maximum floor area ratio by identifying the relations between the relevant mass and surrounding buildings within and outside of the urban block, based on the plan created by an architect in line with design concepts at the initial stages. As a basic method to obtain two hours of consecutive sunlight, vector lines were drawn to connect the solar position and the two vertices at the bottom of the elevation. The plane created by the solar vector and the three-dimensional form created by the said plane were used to exclude the mass of adjacent buildings, subsequently preventing the entry of the buildings into the said three-dimensional shape in order to secure sunlight hours. In a bid to verify the design algorithms developed in this study, a variety of simulations were conducted, encompassing from buildings within a single block to nine multiple blocks on the three azimuth angles. The outcomes generated were able to meet the standard of two hours of consecutive sunlight, ensure sunlight hours for the adjacent buildings, and enable high-density development.

4 September 2018 in Sustainability
Verified
Journal Article
Open access
PDF file
HKHo-Jeong Kim
Ho-Jeong Kim
JKJinsoo Kim
Jinsoo Kim
This study presents a design methodology for street-oriented block housing, as a model for gradual small-scale block-unit development, that can secure two hours of continuous access to daylight on the winter solstice at azimuth angles of 0° and 60° in Seoul, South Korea, and, in addition, developed a methodology for wind path planning for existing types of developed housing. The results of this study have confirmed the feasibility of a housing design that can secure two hours of continuous access to daylight along with no less than 200 percent of development density, achieved through the elimination of self-shadows by using distances between residential buildings and shadow characteristics according to azimuth angles. In addition, the study identified an air flow stagnation section by assessing the air flow of the exterior space of street-oriented block housing in consideration of day-lit environments, and examined a planning model that can enhance natural ventilation potential by activating the air flow of the exterior space. Wind path planning was conducted for 24 alternatives that were produced based on the developed design methodology, and the wind velocity ratio of street-oriented block housing ranged from 0.34 to 0.59. In terms of disadvantages of street-oriented block housing in securing wind paths, this study confirmed that air flow could be strengthened by adjusting the form of the lower-part opening, which is open in the direction of incoming wind, designing a staggered mass layout in high-rise masses, and combining building floor heights. The above findings of this study suggest that a performance-based approach is necessary for the improvement of environmental performance in street-oriented block housing, in consideration of azimuth angles and the prevailing wind direction from the initial phase of planning.

11 November 2024 in Sustainability
Verified
Journal Article
Open access
PDF file
HHHee Jung Ham
Hee Jung Ham
Sungsu LeeSungsu Lee
Sungsu Lee
HKHo-Jeong Kim
Ho-Jeong Kim
This study investigates the impact of building insulation standards on indoor thermal environments and the risk of heat-related illnesses during heatwaves in South Korea. Indoor temperatures were measured in residential buildings located in Chuncheon and Gwangju during the 2022 heatwave, with outdoor temperature data sourced from the Korea Meteorological Administration. Probability distribution fitting was used to estimate the likelihood of indoor temperatures exceeding the critical threshold of 27 °C. Additionally, a linear regression analysis was conducted to examine the relationship between the probability of exceeding the threshold and heat-related illness data from 2017 to 2023 provided by the Korea Disease Control and Prevention Agency. The findings reveal significant variations in indoor thermal conditions during heatwaves, influenced by factors such as building type, year of construction, and climate region, which affect the thermal insulation performance. Buildings with a lower thermal insulation performance were associated with higher indoor temperatures, increasing the likelihood of exceeding the critical threshold and contributing to a higher incidence of heat-related illnesses, particularly in provincial non-metropolitan areas. These results underscore the need for region-specific building insulation standards that address both winter energy efficiency and summer heatwave resilience. Enhancing thermal insulation in vulnerable regions could significantly reduce the risk of heat-related illnesses and improve public health resilience to extreme heat events.

1 September 2016 in Journal of Asian Architecture and Building Engineering
Verified
Journal Article
Open access
PDF file
HKHo-Jeong Kim
Ho-Jeong Kim
Perimeter block housing was introduced from the 2000s as an alternative means of urban construction that has been polarized between the large-scale development of high-density high-rise buildings and the development of small plots of land. The results of this paper allow the possibility of forming building types that satisfy the standard of two consecutive daylight hours for all households by using the properties and principles of shadows in perimeter block housing. It also provides the possibility of the combination of building forms without daylight interference from the south mass by manipulating the distances between adjacent buildings at different azimuth angles. Furthermore, comparing the energy load of residential buildings as suggested from the results of the study, it was possible to confirm whether residential buildings optimized for the day-lit environment have an effect in terms of energy usage performance, and further suggested planning directions through the analysis of daylight, sunray, and energy load. The study suggests a rational methodology for the layout of residential buildings that is optimized for the day-lit environment and also considers the issue of energy performance.

21 December 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HHHee Jung Ham
Hee Jung Ham
Sungsu LeeSungsu Lee
Sungsu Lee
SCSeung Hun Choi
Seung Hun Choi
HKHo-Jeong Kim
Ho-Jeong Kim
Investigating flow separation regions on the surfaces of three-dimensional bluff bodies in turbulent flows is important because these regions can induce significant aerodynamic loads. Separation bubbles can generate extreme pressures, making the roof components of low-rise buildings vulnerable. In this study, proper orthogonal decomposition (POD) was applied to wind-induced roof pressures to elucidate the physical significance of the dominant modes. Based on the interpretation of the first mode from the POD, the mean reattachment length of the roof separation bubbles on a low-rise building model in turbulent flow was determined. The mean reattachment length derived from the POD was then compared with the length obtained from an aerodynamic database. For the centerline of the roof, the mean reattachment length based on the POD aligned well with that from the aerodynamic database, showing a difference of less than 5%. This study highlights the efficacy of POD as a powerful tool for estimating the reattachment length of separation bubbles on bluff bodies.