Hou-Guang Chen

Prof. Hou-Guang Chen

I-Shou University, Kaohsiung City, Taiwan
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2007 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
HCHou-Guang Chen
Hou-Guang Chen
TKTsung-Shine Ko
Tsung-Shine Ko
SLShih-Chun Ling
Shih-Chun Ling
Tien-Chang LuTien-Chang Lu
Tien-Chang Lu
HKHao-Chung Kuo
Hao-Chung Kuo
LCLi Chang
Li Chang
Extended defect reduction in GaN can be achieved via direct growth on stripe patterned (11¯02) r -plane sapphire substrates by metal organic chemical vapor deposition. The striped mesa is along [112¯0] with two etched sides in {0001} and {11¯01} faces. GaN grown on both etched facets in epitaxy exhibit different crystallographic relationships with sapphire substrate which are (11¯02)sapphire‖(112¯0)GaN and [112¯0]sapphire‖[1¯100]GaN , and (0001)sapphire‖(0001)GaN and [112¯0]sapphire‖[1¯100]GaN , respectively. The dislocation densities can be significantly reduced through epitaxial growth on the inclined lateral faces of mesas. Dislocation density in the order of ∼107cm−2 can be achieved in the tilted GaN.

10 October 2016 in Metals
Verified
Journal Article
Open access
PDF file
HKHsu Keng-Tu
Hsu Keng-Tu
Huei-Sen WangHuei-Sen Wang
Huei-Sen Wang
HCHou-Guang Chen
Hou-Guang Chen
PCPo-Chun Chen
Po-Chun Chen
This study investigated the effects of the hot isostatic pressing process on the crack healing, microstructure, and mechanical properties of the laser repair-welded CM247LC precipitation-hardened superalloy. To ensure the strength of the repair-welded area, this study used the direct re-melting approach, and simulated the repair welding with the filler addition, which has a chemical composition matching that of the base superalloy. As expected, different types of cracks, including the solidification crack in the weld fusion zone and various types of liquidation cracks in the heat-affected zone, were observed. Through a proper hot isostatic pressing healing process, all cracks in the weld fusion zone and the heat-affected zone of the repair-welded pieces were healed. At the same time, some nano- and micro-sized carbides tended to form discontinuously along the healed crack trace. A micro-hardness test was conducted in the repair-welded area, and the results were similar to that of the as-cast material.

1 July 2008 in Chemical Vapor Deposition
Verified
Journal Article
Closed access
PDF file
HCHou-Guang Chen
Hou-Guang Chen
LCLi Chang
Li Chang
SCShih‐Yin Cho
Shih‐Yin Cho
JYJhih‐Kun Yan
Jhih‐Kun Yan
CLChun‐An Lu
Chun‐An Lu

1 March 2005 in Journal of Materials Research
Verified
Journal Article
Closed access
PDF file
HCHou-Guang Chen
Hou-Guang Chen
LCLi Chang
Li Chang

1 November 2023 in Coatings
Verified
Journal Article
Open access
PDF file
HCHou-Guang Chen
Hou-Guang Chen
Huei-Sen WangHuei-Sen Wang
Huei-Sen Wang
Sheng-Rui JianSheng-Rui Jian
Sheng-Rui Jian
TYTung-Lun Yeh
Tung-Lun Yeh
JFJing-Yi Feng
Jing-Yi Feng
This study demonstrated the epitaxial growth of single-phase (111) CoO and (111) Co3O4 thin films on a-plane sapphire substrates using an atmospheric pressure mist chemical vapor deposition (mist-CVD) process. The phase structure of the grown cobalt oxide films was manipulated by controlling the growth temperature and process ambient, confirmed through X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. Furthermore, the electrical properties of Co3O4 films were significantly improved after thermal annealing in oxygen ambient, exhibiting a stable p-type conductivity with an electrical resistivity of 8.35 Ohm cm and a carrier concentration of 4.19 × 1016 cm−3. While annealing CoO in oxygen atmosphere, the Co3O4 films were found to be most readily formed on the CoO surface due to the oxidation reaction. The orientation of the atomic arrangement of formed Co3O4 was epitaxially constrained by the underlying CoO epitaxial layer. The oxidation of CoO to Co3O4 was largely driven by outward diffusion of cobalt cations, resulting in the formation of pores in the interior of formed Co3O4 films.

3 December 2007 in Journal of Crystal Growth
Verified
Journal Article
Closed access
HCHou-Guang Chen
Hou-Guang Chen
TKTsung-Shine Ko
Tsung-Shine Ko
LCLi Chang
Li Chang
YWYue-Han Wu
Yue-Han Wu
Tien-Chang LuTien-Chang Lu
Tien-Chang Lu
SWShing-Chung Wang
Shing-Chung Wang