Buildings with a high window-to-wall ratio tend to suffer from excessive solar gains/losses that usually result in high energy demand and discomfort for occupants. Solar control films (SCFs) are a passive solution with the potential to increase the performance of new or refurbished glazing they are applied to. This paper presents a comprehensive literature review of the performance of SCFs applied to glazing systems of buildings. Research studies with experimental, analytical and computer simulation approaches were gathered and analyzed, identifying glass and film systems, climatic conditions, energy savings and comfort performance. The research approaches and main findings of existing research studies were compared and discussed. The presence of SCFs significantly reduced indoor solar radiation and illuminance levels, particularly with reflective films applied to south-oriented glazing (northern hemisphere). Glazing systems with SCFs were reported to promote cooling energy savings compared with clear glazing in hot climates. Few studies have explored the visual and thermal comfort performance of SCFs, concluding that these films promote thermal comfort, and reduce excessive illuminance and potential glare. Furthermore, this paper helps to highlight areas of guidance for future studies on the topic.

Electrochromic glazing alters its optical properties in the absence/presence of an electrical charge, varying from clear to dark to control daylighting and solar heat gains. This study aims to evaluate the impact of an electrochromic glazing, with indoor glare or temperature control, on the energy performance and thermal and visual comfort of an office room under three European climates, using a calibrated simulation model. The novelty of the paper lies in its combined performance assessment, using different standards and metrics. The results showed reduced climatization energy requirements with temperature control, but significantly increased artificial lighting energy use. Glare control achieved useful illuminance levels during 74–80% of working hours. Concerning temperature control, working hours within thermal comfort increased (21–43%) under a free-float regime. Moreover, the performance of this glazing was compared to that of a clear glazing with/without a reflective film and a thermochromic glazing for different solar orientations. The electrochromic glazing with glare control showed the highest energy savings (14–36%) for a western orientation, and the lowest negative impact on daylighting for a northern orientation. The best glare reduction was achieved with the reflective film. Considering the free-float regime, the electrochromic glazing, with temperature control, showed the highest increase in working hours within thermal comfort (6–9%) for a western orientation.