Andrea Nobili

Prof. Andrea Nobili

University of Modena and Reggio Emilia
orcid

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2013 in Construction and Building Materials
Verified
Journal Article
Open access
Andrea NobiliAndrea Nobili
Andrea Nobili
DLDIEF-Dipartimento di Ingegneria Lanzoni
DIEF-Dipartimento di Ingegneria Lanzoni
ATAngelo Marcello Tarantino
Angelo Marcello Tarantino
In this work, basic guidelines are provided for the design of a polypropylene-based fiber reinforced concrete (PFRC) road pavement, as applied in an actual testing section resting inside a tunnel of the “Quadrilatero Marche-Umbria” road empowerment project, Italy. Results of a six-month monitoring carried out on actual traffic loads are also presented, as a feedback to the designing stage. Monitoring encompasses direct measurement of the strain level inside the cast as well as acoustic measurement. It is shown that the fiber reinforced concrete technology provides an efficient, safe as well as cost-effective design solution for roadways, especially inside tunnels

1 February 2016 in Construction and Building Materials
Verified
Journal Article
Open access
Andrea NobiliAndrea Nobili
Andrea Nobili
In this paper, the effect of the alkaline and of the saline environments on prismatic specimens of impregnated alkali-resistant Glass Fabric Reinforced Cementitious Matrix (GFRCM) coupons is investigated. Two types of mortar are considered as representative of a mid-high performance or fine-texture matrix. Coupons are manufactured, cured for 28 days and then submerged in the alkaline or saline solution at constant temperature in a climatic chamber for 1000 h (aging). Specimens in the control group are retained in the laboratory environment. Mechanical performance of the aged coupons is assessed through tensile testing. A Digital Image Correlation (DIC) system is used to measure the actual specimen deformation. Ultimate strength and elongation, uncracked and cracked matrix elastic moduli, turning point location and failure mechanisms are determined and compared with the control group's through a variance analysis. Statistical support is found for an important reduction in the ultimate strength and elongation, owing to mortar degradation. This result is confirmed by a similar analysis carried out on the single components (mortars and glass fabric) of the composite. Mortar degradation affects failure through favoring a less desirable fabric slip mechanism, as opposed to fabric rupture. © 2015 Elsevier Ltd. All rights reserved

1 May 2018 in Composites Part B: Engineering
Verified
Journal Article
Open access
Cesare SignoriniCesare Signorini
Cesare Signorini
Andrea NobiliAndrea Nobili
Andrea Nobili
Erika Iveth Cedillo-GonzálezErika Iveth Cedillo-González
Erika Iveth Cedillo-González
Cristina SiligardiCristina Siligardi
Cristina Siligardi

1 March 2012 in Construction and Building Materials
Verified
Journal Article
Closed access
DLDIEF-Dipartimento di Ingegneria Lanzoni
DIEF-Dipartimento di Ingegneria Lanzoni
Andrea NobiliAndrea Nobili
Andrea Nobili
ATAngelo Marcello Tarantino
Angelo Marcello Tarantino

1 March 2017 in Composites Part B: Engineering
Verified
Journal Article
Open access
Andrea NobiliAndrea Nobili
Andrea Nobili
Cesare SignoriniCesare Signorini
Cesare Signorini
This paper investigates the effect of curing time and aggressive environmental exposure on the mechanical performance of impregnated Carbon Fabric Reinforced Cementitious Matrix (CFRCM) composite. Following the recently published IIC-ES AC434 guidelines, saltwater, distilled water, alkali and acid resistance are investigated together with freeze-thaw cycles. Mechanical characterization is based on tensile uni-axial tests under deformation control of rectangular-base prismatic specimens. 28- and 60-day curing times are considered for the control environment as well as for saltwater and alkali resistance. Deformation is monitored via digital acquisition. Besides uni-axial tests, experimental results comprise optical and scanning electron microscopy, crack pattern analysis and failure mechanism assessment. Focus is set on the determination of the design limits for the composite system at failure for the tested environments and curing times. In particular, a comparison is drawn with established design criteria already coded for FRP systems, which introduce the concept of safety (or partial) factors. Environmental conversion factors are also defined and calculated on a statistical basis in a twofold manner, as a mean to determine the design strain and strength limits of exposed specimens from the control (unexposed) data. It is found that they provide a convenient method for assessing the composite vulnerability to the aggressive environments at different curing times

1 September 2018 in Composites Part B: Engineering
Verified
Journal Article
Open access
Massimo MessoriMassimo Messori
Massimo Messori
Andrea NobiliAndrea Nobili
Andrea Nobili
Cesare SignoriniCesare Signorini
Cesare Signorini
Antonella SolaAntonella Sola
Antonella Sola