Ah-Der Lin

Prof. Dr. Ah-Der Lin

Cheng Shiu University
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 June 2018 in Coatings
Verified
Journal Article
Open access
PDF file
Ah-Der LinAh-Der Lin
Ah-Der Lin
CKChi-Liang Kung
Chi-Liang Kung
YCYou-Qing Cao
You-Qing Cao
CHChao-Ming Hsu
Chao-Ming Hsu
CCCheng-Yi Chen
Cheng-Yi Chen
This paper describes the use of a plasma electrolysis technique to apply a nanosilver coating to the surface of stainless steel to achieve hydrophobic properties. We propose an experimental reaction system, which includes stainless steel 316 as the two electrodes and an aqueous solution of potassium nitrate (KNO3), silver nitrate (AgNO3), and ammonium hydroxide (NH4OH) as the electrolyte. Better results with a stainless steel surface coated by nanocrystalline Ag film are obtained using optimal parameters chosen through one-factor-at-a-time experiments. The main parameters consist of electrode distance, KNO3 concentration, and AgNO3 concentration. The experiment focuses on analyzing the impact of the plasma electrolysis technique on processing time. Variations in KNO3 concentration show that 3 wt.% yields the worst result because it causes an uneven surface, whereas 5 wt.% gives excellent results because it creates an even, porous surface and the highest contact angle. An AgNO3 concentration of 0.03 wt.% yields the best contact angle. With the same processing time, silver sediment increases as the KNO3 concentration increases. With respect to variation in electrode distance, we find that when the distance is set at 20 mm, the contact angle exceeds 100° and results in hydrophobic properties on the specimen surface, while other distances yield a contact angle below 80°, resulting in hydrophilic surfaces. The SEM (scanning electron microscope) results show that the surface of the specimen is full of crater-like cavities that directly affect the contact angle. In this experiment, the contact angle yielding optimum hydrophobic properties is 134° ± 10°. Finally, using distribution patterns obtained by elemental analysis, the experimental results lead to an evenly distributed silver coating on the surface of specimens subjected to plasma electrolysis treatment. The study confirms that plasma electrolysis can be used to coat nanosilver onto stainless steel 316.

20 October 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ah-Der LinAh-Der Lin
Ah-Der Lin
THTsung-Pin Hung
Tsung-Pin Hung
JKJao-Hwa Kuang
Jao-Hwa Kuang
HTHsiu-An Tsai
Hsiu-An Tsai
A parallel planetary gear train design is proposed to construct the wind turbine system that has double inputs and one output. The proposed system is flexible for the application, which may use a combination of two rotors, as used for horizontal axis or vertical axis wind turbines. The proposed transmission mechanism merges the dual time varied input wind powers to a synchronous generator. The effect of the gear train parameters on the dynamic power flow variation is modeled and simulated for the proposed wind turbine system. Results indicate the proposed planetary gear train system is a feasible and efficient design for its application to wind turbine systems. The dynamic torque equilibrium equations between meshed gear pairs are employed to analyze the dynamic power flow. The nonlinear behavior of a synchronous generator is also included in the modeling. The dynamic responses of the dual input transmission mechanism are simulated using the 4th order Runge–Kutta method. The study also investigates the effect of system parameters used in this wind turbine system (i.e., the wind speed, the magnetic flux synchronous generator, and the inertia of flywheels) on variations in electrical power output.

29 June 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ah-Der LinAh-Der Lin
Ah-Der Lin
CKChi-Liang Kung
Chi-Liang Kung
WHWei-Chen Hsieh
Wei-Chen Hsieh
CHChao-Ming Hsu
Chao-Ming Hsu
CCCheng-Yi Chen
Cheng-Yi Chen
This research utilizes a plasma electrolysis technique to clean the surface of stainless steel 316. The resulting microstructure enhances the self-cleaning properties of the stainless steel surface. The position of the cathode electrode is varied to enlarge the total surface being processed and achieves a uniform processing surface. We propose a self-made plasma electrolysis reaction system supplemented with a 3-axis platform to control the speed at which the cathode electrode moves. The electrolyte is an aqueous solution of sodium bicarbonate (NaHCO3) and water. We obtain the optimal parameters for applied voltage, moving speed of the specimen at the cathode, and electrode distance using a one-factor-at-a-time experimental approach to achieve uniform distribution of the surface microstructure. We then observe and measure surface micrographs showing the surface roughness of the specimens after experiments, using a scanning electron microscope (SEM) and an atomic force microscope (AFM). The contact angle is experimentally proven to be greater than 100°, indicating that the surface is hydrophobic.

7 November 2022 in Metals
Verified
Journal Article
Open access
PDF file
THTsung-Pin Hung
Tsung-Pin Hung
HTHsiu-An Tsai
Hsiu-An Tsai
Ah-Der LinAh-Der Lin
Ah-Der Lin
This study investigated the surface residual stress for AISI 1045 steel quenched by a YAG laser. A coaxial laser spindle was installed on a CNC machine for the experiment. The laser motion was arranged to follow the path of an extended cycloid which widened the quenching area on the steel surface. Both the temperature distribution and the residual stresses were measured by thermocouples and a portable X-ray diffractometer, respectively. When the temperature distribution was cooled down near the value of the room temperature, the residual stresses were then measured after the laser quenching process. The diffractometer used a single exposure of X-ray with a two-dimensional detector to calculate the Debye–Scherrer ring (D-S ring) for the determination of the normal and shear stresses. Different laser powers were exploited for the measurement of residual stresses, including 500, 600, 700, and 900 watts. In addition to the experiment, an analytic model for the investigation of residual stresses was built by the finite element analysis for which MSC Marc was used. The assumption for the FEA was that the laser spot had a circular shape of uniform energy distribution and the thermal–elastic–plastic model was applied to the simulation for the laser quenching process. The analytic and experimental results for the surface residual stresses had excellent consistency with a maximum difference of 10.5% from the normal stresses. The numerical results for the residual stresses also revealed that the normal stresses were compressive for the laser-quenching treatment and the shear stress could be neglected compared to the normal stress.

3 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YLYu-Ting Lyu
Yu-Ting Lyu
THTsung-Pin Hung
Tsung-Pin Hung
HAHerchang Ay
Herchang Ay
HTHsiu-An Tsai
Hsiu-An Tsai
YCYih-Cherng Chiang
Yih-Cherng Chiang
Ah-Der LinAh-Der Lin
Ah-Der Lin
This study analyzes the composite laminated T-beams using the composite beam and laminated composite plate theories. The theoretical formula was derived assuming that the composite T-beam has one- and two-dimensional (1D and 2D) structures. The 1D analysis was performed according to the Kirchhoff-Love hypothesis, thereby considering only the axial strain to derive a relationship between the strain and displacement. The 2D analysis was performed considering the T-beam as a combination of two composite sheets. The effective stiffness of the beam was derived from the stress-strain and moment-curvature relationships. Furthermore, the deflection of the beam and the stress of each laminate were calculated. A simple support beam, made of AS4/3501-6 carbon/epoxy, was used as a composite laminated T-beam. MSC/NASTRAN finite element software was used for analysis. The accuracy of the theoretical formula and limitations of its use was verified using the finite element analysis. Higher accuracy of the theoretical formula was obtained at a composite beam aspect ratio greater than 15. The formula derived in this study is suitable for thin and long beams.

15 April 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Ah-Der LinAh-Der Lin
Ah-Der Lin
WYWen-Kai Yu
Wen-Kai Yu
SPSian Zheng Poon
Sian Zheng Poon
CCCheng-Yi Chen
Cheng-Yi Chen
CHChao-Ming Hsu
Chao-Ming Hsu
This study explored the application of nitrogen-doped graphene (NDG) ink to the coating of light-emitting diode (LED) lamps for the thermal management. Unlike the general solutions of graphene, the NDG ink used in this study was tuned with high electrical resistance and quietly suitable for the application of the LED lamp coating, which prevented the short circuit problem; besides, the NDG ink also provided a high heat dissipation effect to improve the performance of the LED lamp. The investigation of adhesion and resistance for the NDG ink were conducted by the cross-cut test and the four-point probe resistance measurement, respectively. Three types of LED lamps including the original lamp, fin-removed lamp, and NDG-ink coated (NGC) lamp were tested for the actual operating temperature distribution by K-type thermal couples and for the lumens by the integrating sphere. The results showed that the heat dissipation of the NGC lamp was better than that of the original lamp. In addition, the inspections for the properties of NDG powder were also performed by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and Raman spectroscopy. According to the inspectional results, the NDG powder had a percentage of nitrogen of about 3.8% by XPS, a surface roughness Rq of 0.9 nm by AFM, and over ten layers by Raman analysis. It showed that the NDG powder in this study belonged to the type of multi-layer graphene.