Mahmoud Mohammed Khodeir

Dr. Mahmoud Mohammed Khodeir

School of Electronic and Information Engineering, Beihang University, Beijing, China
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2024 in Sensors
Verified
Journal Article
Open access
PDF file
Mahmoud Mohammed KhodeirMahmoud Mohammed Khodeir
Mahmoud Mohammed Khodeir
ZYZhaowen Yan
Zhaowen Yan
FZFu Yu Zhao
Fu Yu Zhao
A sensitive, miniaturized, ultrawideband probe is proposed for near-field measurements. The proposed probe is based on a new V-shaped tip design and a slope structure resulting in better field distribution and impedance matching with a span bandwidth from 10 kHz up to 52 GHz, which is compatible with ultrawideband applications. The proposed E-probe fabrication process utilizes a four-layer printed circuit board (PCB) using Rogers RO4003 (tm) and RO4450 high-performance dielectrics, with εr = 3.55 and 3.3, respectively. The probe length is 40 mm with a minimum width of 4 mm, which is suitable for narrow, complex, and integrated PCBs. The passive E-probe sensitivity is −106.29 dBm and −87.48 dBm at 2 GHz and 40 GHz, respectively. It has a very small spatial resolution of 0.5 mm at 20, 25, 30, and 35 GHz. The probe is small and cheap and can diagnose electromagnetic interference (EMI) in electronic systems such as telemetry, UAVs, and avionics.

20 September 2020
Verified
Conference Paper
Closed access
Mahmoud Mohammed KhodeirMahmoud Mohammed Khodeir
Mahmoud Mohammed Khodeir
ZYZhaowen Yan
Zhaowen Yan
ZMZheng Min
Zheng Min

22 August 2023
Verified
Conference Paper
Closed access
Mahmoud Mohammed KhodeirMahmoud Mohammed Khodeir
Mahmoud Mohammed Khodeir
ZYZhaowen Yan
Zhaowen Yan
FZFuyu Zhao
Fuyu Zhao
A dual-stage, wideband, and active electric field probe is being introduced in this paper. Due to the rapid change in the electric and electronic field industry, Electromagnetic Compatibility EMC and the problem of Electromagnetic Interference EMI became a must for study, and to overcome the main source for the unwanted electrical effects. The probe design is divided into two stages, the first stage is the passive part of the probe, which is an ultrawideband probe that works from 10KHz to 20GHz. It is a PCB with four layers with high-performance dielectric (dielectric constant is 3.55 and 3.3). The second part is the active part, which is broadband and can enhance the probe sensitivity, which works from 10KHz to 500MHz. The two stages will be connected via a coaxial cable and SMA connector. The dual-stage probe can work with a wideband Data Acquisition System DAQ up to 500MHz with a gain of up to 41dB and a low NF. It is a two-layer PCB. The dual-stage probe can enhance the sensitivity by filtering and amplifying the signal to meet the DAQ system requirements. The first and second stages both can work separately, the passive probe can work from up to 20GHz and the second active part can work as a front-end PCB from up to 500MHz with 41dB gain.

30 October 2023
Verified
Conference Paper
Closed access
Mahmoud Mohammed KhodeirMahmoud Mohammed Khodeir
Mahmoud Mohammed Khodeir
ZYZhaowen Yan
Zhaowen Yan
FZFuyu Zhao
Fuyu Zhao
TGTengfei Gao
Tengfei Gao
Based on a quad V-shaped tip design, this paper introduces a novel high-performance, low-cost, wideband, and high spatial resolution electric field probe that operates from 10 kHz to 12 GHz for identifying and locating the EMI problem of the electric and electronic systems for near-field measurement. The sensitivity increased to -19 dB which is 8 dB higher than commercial and other introduced probes. The spatial resolution increased to 0.75 mm at 10 GHz. This probe is fabricated in a four-layer printed circuit board (PCB) with high-performance dielectric (RO4450 and RO4003) with a tip width of 4 mm which is very suitable for the narrow and complex PCBs.

20 October 2023
Verified
Conference Paper
Closed access
Mahmoud Mohammed KhodeirMahmoud Mohammed Khodeir
Mahmoud Mohammed Khodeir
ZYZhaowen Yan
Zhaowen Yan
YJYunxiang Jia
Yunxiang Jia
ZMZhangqiang Ma
Zhangqiang Ma
Based on a new Horn-Tip structure, this paper introduces a new design for an ultrawideband electric field probe working from 10 kHz up to 50 GHz for better Electromagnetic Compatibility EMC and diagnosis of Electromagnetic Interference EMI. The tip design is based on a Horn shape to enhance and improve the probe efficiency and sensitivity. The probe has been designed on a 4-layer PCB. The probe is divided into 3-parts, the induction part which has the horn-tip structure, the transmission part which is designed by a stripline structure using high-performance dielectrics “Rogers RO4003 (tm)” and “RO4450” with relative permittivity ε r 3.55 and 3.3 respectively, and the output part. The probe length is 60 mm with a minimum tip width of 4 mm which is suitable for the narrow and complex PCBs. The stripline transmission part is designed with a slope structure to achieve a good field distribution and enhance impedance matching, resulting in ultra-wide bandwidth scanning. The transfer gain sensitivity is −20 dB at 9 GHz which is about 6 dB higher than some referenced and introduced probes. The spatial resolution is a very narrow result of 0.58 mm when the probe is 0.3 mm above the DUT.

1 May 2014 in The International Conference on Electrical Engineering
Verified
Journal Article
Closed access
PDF file
Mahmoud Mohammed KhodeirMahmoud Mohammed Khodeir
Mahmoud Mohammed Khodeir
KMK. Morsi
K. Morsi
AMA. Metkees
A. Metkees
: Frequency Hopping Spread Spectrum (FHSS) is a technique that wireless devicescommunicate such that the transmission frequencies are alternated in a pre-determined orderedhopping pattern. In tradition, the hopping sequence is controlled by using a pseudo-random codesequence (PN code) known only to both transmitter and receiver.In this paper, the carrier frequency of a frequency shift keying FSK system is interfered by thesurrounding environment. Thus, FHSS will be used instead to switch between multiple carrierswithin the available bandwidth to minimize the interference. Such a system requires that thegenerated PN code ensures that all carrier frequencies within the hopping pattern should be semiequallyused during transmission. Several simulation scenarios were carried out to comparebetween a single long PN code and an accumulated short one. Finally, the developed FH systemis implemented using an AD9910 Direct Digital Synthesizer (DDS) and an ALTERA Cyclone-IIIFPGA chip.Results proved that, according to the system requirements, an accumulated short PN code offersnoticeable residual correlations and provides a higher level of autocorrelation compared to asingle long PN code. Results, also, verified that the developed FH system provides lower BitError Rate (BER) than the FSK one.