Christophe Bastien

Dr. Christophe Bastien

Coventry University
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2017 in Case Studies in Thermal Engineering
Verified
Journal Article
Open access
AEAhmed Elsayed
Ahmed Elsayed
Christophe BastienChristophe Bastien
Christophe Bastien
SJSteve Jones
Steve Jones
JCJesper Christensen
Jesper Christensen
HMHumberto Medina
Humberto Medina
HKHassan Kassem
Hassan Kassem
Using baffles in exhaust mufflers is known to improve their transmission loss. The baffle cut ratio should affect the muffler performance analogous to a shell-and-tube heat exchanger. To the authors’ knowledge, there is no previous assessment reported in literature of the effects that the baffle cut ratio configuration has on acoustic response and back pressure. This investigation presents a parametric study on the effect of baffle configuration on transmission loss and pressure drop predicted. The effect of (i) the baffle cut ratio and baffle spacing, (ii) the number of baffle holes, and (iii) the hole distribution for their effect on transmission loss was investigated. Results show that decreasing the baffle cut ratio tends to increase the transmission loss at intermediate frequencies by up to 45%. Decreasing the spacing between muffler plates was shown to enhance the muffler transmission loss by 40%. To assess the baffle effect on flow, the OpenFoam CFD libraries were utilized using the thermal baffle approach model. Baffles were found to cause sudden drop in fluid temperature in axial flow direction. The outlet exhaust gases temperature was found to decrease by 15% as the baffle cut ratio changed from 75% to 25%

1 January 2014 in Materials & Design (1980-2015)
Verified
Journal Article
Closed access
HGHua Guo
Hua Guo
Christophe BastienChristophe Bastien
Christophe Bastien
MBM. Blundell
M. Blundell
GWG. Wood
G. Wood

1 February 2012 in International Journal of Crashworthiness
Verified
Journal Article
Closed access
JCJ. Christensen
J. Christensen
Christophe BastienChristophe Bastien
Christophe Bastien
MBM. V. Blundell
M. V. Blundell
This paper investigates the effects of variations in modelling of roof crush loading scenarios upon topology and mass of a body in white (BIW) for a hybrid electric vehicle (HEV). These variations incorporated the proposed changes to the Federal Motor Vehicle Safety Standards (FMVSS) 216 standard. The base model used for the investigation in this paper was based upon a series of optimisation studies. The overall purpose was to minimise the BIW mass of an HEV subjected to multiple crash scenarios including high-speed front impact, offset deformable barrier (ODB), side impact, pole impact, high-speed rear impact and low-speed rear impact in addition to a roof crush scenario. For the purpose of achieving this goal, finite element (FE) topology optimisation was employed. Owing to the limitations of present-day FE optimisation software, all models utilised linear static load cases. In addition, all models made use of inertia relief (IR) boundary conditions. With the above approach, the BIW topology was investigated.

2 January 2018 in Structural and Multidisciplinary Optimization
Verified
Journal Article
Closed access
PDF file
MSManinder Sehmi
Maninder Sehmi
JCJesper Christensen
Jesper Christensen
Christophe BastienChristophe Bastien
Christophe Bastien
SKStratis Kanarachos
Stratis Kanarachos

26 September 2021 in International Journal of Automotive Technology
Verified
Journal Article
Closed access
PDF file
XLXi Liu
Xi Liu
RLRui Liang
Rui Liang
YHYuanzhi Hu
Yuanzhi Hu
XTXuebang Tang
Xuebang Tang
Christophe BastienChristophe Bastien
Christophe Bastien
RZRuibin Zhang
Ruibin Zhang

15 April 2011 in International Journal of Vehicle Structures & Systems
Verified
Journal Article
Open access
JCJesper Christensen
Jesper Christensen
Christophe BastienChristophe Bastien
Christophe Bastien
MBMike Blundell
Mike Blundell
AGAndrew Gittens
Andrew Gittens
OTOliver Tomlin
Oliver Tomlin
As focus on the world climate rises, so does the demand for ever more environmentally friendly technologies. The response from the automotive industry includes vehicles whose primary propulsion systems are not based upon fossil fuels. On this basis a Low Carbon Vehicle Technology Project, partly funded by the European Regional Development Fund, is currently under way; part of this project involves designing a lightweight Body In White (BIW). This has been specifically tailored to suit the drive train and general packaging requirements associated with a Hybrid Electric Vehicle (HEV). The future opportunities for new lightweight vehicle architecture have been investigated using a technique entitled topology optimisation, which extracts the idealised load paths for a given loading. The topology optimisation includes equivalent NCAP dynamic impact loading conditions, as well as torsional rigidity performance. Initially a total of 7 loading scenarios are applied on a structure comprising of various battery and range extender layouts. Two different optimisation modelling techniques have been undertaken comparing conventional boundary conditions against inertia relief, as well as studying the sensitivity of the BIW topology against the influence of load case direction and battery box stiffness. Optimal locations for the two components having the highest mass, i.e. a single battery pack and a combined range extender and fuel tank have been studied focusing upon the effects of the location of their Centre of Mass. It has been assumed that advances in battery technology will reduce the external dimensions of the battery package, thereby enabling an increased number of possible locations within the BIW.