Prakash C

Dr. Prakash C

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 October 2026 in PLOS ONE
Verified
Journal Article
Open access
PDF file
PCPrakash C
Prakash C
PAPalanisamy Angappan
Palanisamy Angappan
PDPalanisamy Duraisamy
Palanisamy Duraisamy
AAA. Agarwal
A. Agarwal
KDKarma Dorji
Karma Dorji
Hybrid aluminium matrix composites (HAMMCs) are of interest for lightweight components requiring improved resistance to wear and friction. The present study investigates the effects of solution treatment temperature, holding time and cooling method on the tribological behaviour of stir-cast LM26/graphite/fly ash hybrid aluminium matrix composites. A Taguchi L27 orthogonal array was used to evaluate solution treatment temperatures of 450, 500 and 550 °C, holding times of 2, 4 and 6 h, and furnace cooling, air cooling and water quenching. Hardness, wear rate and coefficient of friction (COF) were considered as response characteristics. TOPSIS was used for multi-response evaluation, and analysis of variance (ANOVA) was used to assess the contribution of the heat treatment parameters. Scanning electron microscopy (SEM) was used to examine reinforcement distribution in the matrix. The measured hardness ranged from 42.3 to 51.2 BHN, while the wear rate and COF ranged from 0.000667 to 0.000750 mm 3 /min and 0.4002 to 0.4501, respectively. The experimental results showed that hardness increased from 42.3 to 51.2 BHN, while wear rate and coefficient of friction decreased from 0.000750 to 0.000667 mm 3 /min and from 0.4501 to 0.4002, respectively, across the investigated conditions. Experiment 18, corresponding to 500 °C, 6 h and water quenching, gave the highest TOPSIS relative closeness value (0.8933). Factor-level analysis identified 550 °C, 6 h and water quenching (A3B3C3) as the optimum combination within the investigated design space. Temperature had the greatest influence on wear rate, coefficient of friction and the TOPSIS grade, whereas cooling method had the greatest influence on hardness. These results show that the selected heat treatment conditions substantially affected the combined hardness–wear–friction response of the hybrid composite under the investigated dry-sliding conditions.

3 August 2026 in Processes
Verified
Journal Article
Open access
PDF file
PAPalanisamy Angappan
Palanisamy Angappan
DPD. Palanisamy
D. Palanisamy
AAA. Agarwal
A. Agarwal
PCPrakash C
Prakash C
SMSembian Manoharan
Sembian Manoharan
NMNatarajan Manikandan
Natarajan Manikandan
Incoloy 800H (Fe–Ni–Cr) is an iron-based superalloy that is difficult to machine because of its rapid work-hardening behaviour. Although Taguchi-based grey relational analysis has previously been applied to machining optimisation problems, studies employing an integrated grey-fuzzy framework for the dry turning of Incoloy 800H remain limited. Therefore, the present investigation aims to develop and validate a grey-fuzzy optimisation approach for determining the optimal dry turning parameters of Incoloy 800H by simultaneously minimising machining forces, surface roughness, and specific cutting pressure. Cutting speed (35, 45, and 55 m/min), feed rate (0.02, 0.04, and 0.06 mm/rev), and depth of cut (0.5, 0.75, and 1 mm) were selected as input factors, whereas feed force, thrust force, cutting force, surface roughness, and specific cutting pressure were considered output responses. Experiments were conducted using a Taguchi L27 orthogonal array (OA). The proposed methodology integrates grey relational analysis (GRA) with fuzzy logic (FL) to obtain a grey-fuzzy reasoning grade (GFRG) for multi-response optimisation. Analysis of variance (ANOVA) was employed to identify the most influential machining parameter. The results demonstrated that the grey-fuzzy approach provided a more discriminative optimisation index than conventional grey relational analysis by reducing uncertainty in multi-response decision-making. The confirmation experiments revealed an increase in GFRG from 0.550 to 0.900, corresponding to a relative improvement of 63.64% at the optimal parameter setting. The proposed methodology demonstrates that integrating grey relational analysis with fuzzy inference provides a reliable and statistically supported approach for multi-response optimisation of dry turning parameters for Incoloy 800H.