The hydraulic performance of a high-speed submersible axial flow pump is investigated to reduce its energy consumption. A more efficient and stable optimization method that combines parametric design, computational fluid dynamics, and a computer algorithm is proposed. The main aim is to broaden the high-efficiency operating zone, so the average efficiency under multiple conditions is optimized while considering rotor–stator matching. The design-of-experiments method and a radial-basis-function neural network are combined to form the optimization platform, and automatic optimization of the pump design is realized through repeated execution of design and simulation. The flow loss mechanism inside the pump is studied in depth via the entropy generation rate, and regression analysis shows that the pump efficiency is influenced mainly by the blade angles. After optimization, the target efficiency is increased by 8.34%, and the flow field distribution shows that the channel vortex and hydraulic loss are controlled effectively. Finally, the results are validated by experiment. The proposed optimization approach has advantages in saving manpower and obtaining globally optimal solutions.
Multi-stage centrifugal pumps are frequently used in high-lift applications and consume considerable energy, but suffer from poor performance and large axial force. The rear shroud of impeller is trimmed for reducing axial thrust, but this degrades performance. This study analyzes performance degradation and optimizes performance and axial force. Experiments and simulations are conducted on different ratios of rear shroud to front shroud (λ). Total pressure losses are calculated, and flow losses are visualized using the entropy generation method. Both measured and simulated performances decrease as the rear shroud is trimmed. Designs with different λ meet the head coefficient requirement of 1.1. However, λ of 0.86 has the best efficiency of 42.7%, λ of 0.83 reaches 42.5%, λ of 0.8 shows the lowest efficiency of 39.9%. Efficiency in the middle channel improves as the rear shroud is trimmed, but this cannot offset increased losses in the impeller and rear side chamber. Entropy production is exacerbated in the axial passage between impeller and rear side chamber due to the collision between impeller-driven flow and pressure-driven backflow. When λ is reduced by 0.03, axial thrust drops by 7%. To compromise between performance and axial thrust, λ should be designed at 0.83.
Multi-stage centrifugal pumps with floating impellers provide a convenient means of adjustment to meet diverse head requirements. These pumps utilize sealing gaskets to minimize leakage losses and restrict impeller axial motion. However, the impact of sealing gasket breakage on hydraulic performance and internal flow remains uncertain. To investigate this, a novel dynamic mesh simulation method is proposed to enable simultaneous axial motion and rotation of the impeller. Validation of numerical simulations with experiments is performed. Transient hydraulic performance is influenced by impeller axial motion, with a lagging flow field response. Head coefficient and efficiency curves exhibit asymmetric triangular functions with higher fluctuations compared to impeller with fixed axial position. At the design condition, with the impeller floating, the head coefficient ranges from 0.7 to 1.9, while the efficiency ranges from 29.7% to 60.1%. Among the various loss ratios, the hydraulic loss ratio exhibits the highest magnitude, followed by the leakage loss ratio, with the shroud friction loss ratio being the smallest. Entropy production reveals the significant influence of impeller oscillation on local flow loss. The axial motion of the impeller causes drastic velocity and pressure fluctuations in both time and space.
To investigate the static characteristics of aerostatic journal bearings with porous bushing, the flow model—in which the compressibility of lubricating gas is considered—is established based on the Reynolds lubrication equation, Darcy equation for porous material, and continuity equation. With the finite difference method, difference schemes for non-uniform grids, relaxation method, and virtual node method, the numerical method for the governing equations of compressible flow in porous journal bearings is proposed. The effects of nominal clearance of bearings and compressibility of gas on the static characteristics are analyzed. Under the same minimum film thickness and the same gas compressibility, as the nominal clearance widens, the load capacity, mass flow rate, and power consumption increase. Under the same minimum film thickness and the same nominal clearance, with the increase in gas polytropic index, the load capacity strengthens, while the mass flow rate and power consumption decline. This study could provide a reference for the design of porous journal bearings.
The hydrostatic journal bearing equipped with a carbon-fiber-reinforced carbon-based porous bushing is employed in the hydraulic turbomachine. The bearing exhibits high load capacity, but may unduly consume pressurized lubricant. This study aims to maximize the load capacity and minimize the feeding power. The journal radius, nominal clearance, porous bushing length, porous bushing thickness, feeding pressure, and material permeability are selected to optimize. A fast optimization method is proposed, integrating an in-house porous journal bearing solver (PBS), sampling method, surrogate model, and genetic algorithm. Behind PBS, a theoretical flow model based on the Reynolds lubrication equation and the Darcy equation is established, and a new numerical method based on the finite difference method is proposed. PBS substitutes ansysfluent by calculating bearing performances accurately and instantly, which is the first novelty to facilitate optimization. Then, artificial neural networks are trained as error-free and time-efficient surrogate models to produce bearing objectives in the evolution, which is the second acceleration highlight. The running time is reduced significantly. The load capacity is improved by 68.1%, whereas the feeding power declines by 50.5%. In the optimized case, a sharp pressure hump leads to greater load capacity, while the radial velocity decreases, resulting in reduced feeding power.