A concept of non-linear electromagnetic system with the rotational magnetic pendulum for energy harvesting from mechanical vibrations was presented. The system was stimulated by vertical excitation coming from a shaker. The main assumption of the system was the montage of additional regulated stationary magnets inside coils creating double potential well, and the system was made with a 3D printing technique in order to avoid a magnetic coupling with the housing. In validation process of the system, modelling of electromagnetic effects in different configurations of magnets positions was performed with the application of a finite element method (FEM) obtaining the value of magnetic force acting on the pendulum. A laboratory measurement circuit was built and an experiment was carried out. The voltage and power outputs were measured for different excitations in range of system operational frequencies found experimentally. The experimental results of the physical system with electrical circuit and numerical estimations of the magnetic field of a stationary magnet’s configuration were used to derive a mathematical model. The equation of motion for the rotational pendulum was used to prove the broadband frequency effect.
1 March 2020 in Advances in Science and Technology Research Journal
In hydraulic pump system various states can occur caused by mechanical and physical phenomena. To detect them, the Short Time Fourier Transform (STFT) is applied. This paper will consider an application of STFT to monitor and evaluate hydraulic pump system operation in different states of...
This paper analyzes the energy efficiency of a Micro Fiber Composite (MFC) piezoelectric system. It is based on a smart Lead Zirconate Titanate material that consists of a monolithic PZT (piezoelectric ceramic) wafer, which is a ceramic-based piezoelectric material. An experimental test rig consisting of a wind tunnel and a developed measurement system was used to conduct the experiment. The developed test rig allowed changing the air velocity around the tested bluff body and the frequency of forced vibrations as well as recording the output voltage signal and linear acceleration of the tested object. The mechanical vibrations and the air flow were used to find the optimal performance of the piezoelectric energy harvesting system. The performance of the proposed piezoelectric wind energy harvester was tested for the same design, but of different masses. The geometry of the hybrid bluff body is a combination of cuboid and cylindrical shapes. The results of testing five bluff bodies for a range of wind tunnel air flow velocities from 4 to 15 m/s with additional vibration excitation frequencies from 0 to 10 Hz are presented. The conducted tests revealed the areas of the highest voltage output under specific excitation conditions that enable supplying low-power sensors with harvested energy.
This article classifies the dynamic response of rolling bearings in terms of radial internal clearance values. The value of the radial internal clearance in rolling-element bearings cannot be described in a deterministic manner, which shows the challenge of its detection through the analysis of the bearing’s dynamics. In this article, we show the original approach to its intelligent detection through the analysis of short-time intervals and the calculation of chosen indicators, which can be assigned to the specific clearance class. The tests were carried out on a set of 10 brand new bearings of the same type (double row self-aligning ball bearing NTN 2309SK) with different radial internal clearances corresponding to individual classes of the ISO-1132 standard. The classification was carried out based on the time series of vibrations recorded by the accelerometer and then digitally processed. Window statistical indicators widely used in the diagnosis of rolling bearings, which served as features for the machine learning models, were calculated. The accuracy of the classification turned out to be unsatisfactory; therefore, it was decided to use a more advanced method of time series processing, which allows for the extraction of subsequent dominant frequencies into experimental modes (Variational Mode Decomposition (VMD)). Applying the same statistical indicators to the modes allowed for an increase in classification accuracy to over 90%.
This work experimentally addresses damage calibration of an unmanned aerial vehicle in operational condition. A wide range of damage level and types are simulated and controlled by an electric motor via pulse width modulation in this regard. The measurement is carried out via established protocols of using a piezo-patch on one of the 8 arms, utilising the vibration sensitivity and flexibility of the arms, demonstrating repeatability of such protocol. Subsequently, recurrence analysis on the voltage time series data is performed for detection of damage. Quantifiers of damage extent are then created for the full range of damage conditions, including the extreme case of complete loss of power. Experimental baseline condition for no damage condition is also established in this regard. Both diagonal-line and vertical-line based indicators from recurrence analysis are sensitive to the quantitative estimates of damage levels and a statistical test of significance analysis confirms that it is possible to automate distinguishing the levels of damage. The damage quantifiers proposed in this paper are useful for rapid monitoring of unmanned aerial vehicle operations of connection.
Often the input values used in mathematical models for rolling bearings are in a wide range, i.e., very small values of deformation and damping are confronted with big values of stiffness in the governing equations, which leads to miscalculations. This paper presents a two degrees of freedom (2-DOF) dimensionless mathematical model for ball bearings describing a procedure, which helps to scale the problem and reveal the relationships between dimensionless terms and their influence on the system’s response. The derived mathematical model considers nonlinear features as stiffness, damping, and radial internal clearance referring to the Hertzian contact theory. Further, important features are also taken into account including an external load, the eccentricity of the shaft-bearing system, and shape errors on the raceway investigating variable dynamics of the ball bearing. Analysis of obtained responses with Fast Fourier Transform, phase plots, orbit plots, and recurrences provide a rich source of information about the dynamics of the system and it helped to find the transition between the periodic and chaotic response and how it affects the topology of RPs and recurrence quantificators.