In this article, novel 3D printed sensors for temperature measurement are presented. A planar structure of the resistive element is made, utilizing paths of a conductive filament embedded in an elastic base. Both electrically conductive and flexible filaments are used simultaneously during the 3D printing procedure, to form a ready–to–use measuring device. Due to the achieved flexibility, the detectors may be used on curved and irregular surfaces, with no concern for their possible damage. The geometry and properties of the proposed resistance detectors are discussed, along with a printing procedure. Numerical models of considered sensors are characterized, and the calculated current distributions as well as equivalent resistances of the different structures are compared. Then, a nonlinear influence of temperature on the resistance is experimentally determined for the exemplary planar sensors. Based on these results, using first–order and hybrid linear–exponential approximations, the analytical formulae are derived. Additionally, the device to measure an average temperature from several measuring surfaces is considered. Since geometry of the sensor can be designed utilizing presented approach and printed by applying fused deposition modeling, the functional device can be customized to individual needs.

The article presents an analysis of the maximum efficiency and maximum load power, which are available to obtain in periodic wireless power transfer (WPT) systems. The numerical computations of the proposed WPT structures are performed using the finite element method and branch current method. Two theoretical models are discussed, i.e., a numerical model with simplified structure and boundary conditions as well as an equivalent circuit model is proposed to solve WPT systems with many magnetically coupled planar coils. A multivariate analysis is performed, which takes into account the variability of the number of turns, distance between a transmitting and receiving coil, and the frequency of an energy source. The outputs, such as overall efficiency, power of the source and power transferred to a load are discussed. The formulas for the load impedance required to maximize the efficiency or load power, which are taking into account the electrical parameters of the system resulting from its geometry, are presented. The results obtained from proposed models are consistent, which confirm the correctness of the adopted circuit model, which is less complex and faster to compute than numerical one. It is also possible to perform a quick assessment of electrical parameters of the analyzed WPT structure, using presented analytical formulas and numerical model or experimental data. The results allow for a detailed discussion of the dependence of the efficiency and power of the WPT system with respect to geometry of spiral coils.

This article presents a method for analysis of the low-power periodic Wireless Power Transfer (WPT) system, using field and circuit models. A three-dimensional numerical model of multi-segment charging system, with periodic boundary conditions and current sheet approximation was solved by using the finite element method (FEM) and discussed. An equivalent circuit model of periodic WPT system was proposed, and required lumped parameters were obtained, utilizing analytical formulae. Mathematical formulations were complemented by analysis of some geometrical variants, where transmitting and receiving coils with different sizes and numbers of turns were considered. The results indicated that the proposed circuit model was able to achieve similar accuracy as the numerical model. However, the complexity of model and analysis were significantly reduced.

In this paper, we present the method for determination of effective electromagnetic parameters of complex building materials. By application of the proposed algorithm, it is possible to analyze electromagnetic field distribution for large-scale problems with heterogeneous materials. The two-dimensional numerical model of building components (hollow brick) with periodic boundary conditions was solved using the finite-difference time-domain method (FDTD) and discussed. On this basis, the resultant transmission coefficient was found and then the equivalent relative permeability and electric conductivity of heterogeneous dielectric structures, in the developed homogenization algorithm, were identified. The homogenization of material properties was achieved by performing a multi-variant optimization scheme and finally, selecting optimal electric parameters. Despite the analysis of heterogeneous building materials, the presented algorithm is shown as a tool for the homogenization of complex structures when scattering of a high-frequency electromagnetic field is considered.

In the paper the synthesis of an electric cloak is discussed. The nonhomogeneous composite material was proposed as a realization of a stationary electric field metamaterial with anisotropic properties necessary for cloaking objects. The particle swarm optimization (PSO) method was applied for the synthesis of nonhomogeneous material composed of periodically arranged unit cells. Anisotropic properties of metamaterial were achieved by adjusting the internal geometry of a porous unit cell structure. Proposed elements have a wide range of effective electrical conductivities in orthogonal directions of an external static electric field. Optimization scheme was applied to design the required unit cell structure, defined by four geometrical parameters modified and adjusted by the PSO. The numerical models of the conductive background, non-conductive object and several types of cloaks were investigated. The results obtained by The Finite element method (FEM) were characterized with respect to theoretical values of the required conductivities and cloaking effectiveness.

This paper analyses the conceptual application of a wireless power transfer (WPT) system with multiple resonators supplying outdoor sensors using a mobile charger. The solution is based on the idea of using sensors, located in open space, to monitor environmental parameters. Instead of the typical two-coil WPT with a single charger, energy transfer is realized simultaneously, using a group of identical planar coils as transmitters and receivers connected to the independent power supply circuits of each sensor and microcontroller. By isolating these charged circuits, a higher reliability and powering flexibility of the weather station can be achieved. The concept of the proposed system was discussed, and it was proposed to include the main devices in it. A theoretical analysis was performed considering all mutual couplings and the skin effect; hence, the system is characterized by a matrix equation and sufficient formulae are given. The calculations were verified experimentally for different frequencies, two possible distances between the transmitters and receivers, and equivalent loads. Both the efficiency and load power are compared and discussed, showing that this solution can provide power to ultra-low-power devices, yet the efficiency must still be improved. At the small distance between the transmitting and receiving coils (5 mm), the maximum efficiency value was about 40%, with a load resistance of 10 Ω. By doubling the distance between the coils, the efficiency of the WPT system decreased by three times.