An oscillator is a key component of a satellite communication measurement and control system, performing symmetry precisely as a time frequency reference. At the same time, the phase noise index has a close coupling relationship with the overall performance of the entire system, while persistently breaking the symmetry property of the oscillator during work. It is very important to study and reasonably allocate the phase noise index. According to the theoretical formula of phase noise, this paper analyzes the power law spectral model in the frequency domain and the noise jitter characteristics in the time domain. Using the carrier tracking loop in the measurement system, the frequency domain transfer model of phase noise is established, and typical analysis results are given. A discrete fractional integration algorithm is proposed, which can generate the phase noise time domain sequence under the given power law spectral model coefficients. The proposed algorithm is more realistic compared with the previous numerical calculation method, and has sufficient accuracy compared with the results of the instrument. After frequency domain conversion, the RMS deviation between the simulated noise sequence in the frequency domain and the measured single sideband power spectral density is less than 2.5 dB, indicating that the phase noise sequence can reflect the frequency domain characteristics more completely. A communication measurement simulation system is built, and a discrete sequence simulation analysis method combining frequency domain and time domain is provided, and the coupling relationship of key indicators such as phase noise, thermal noise, communication data rate, modulation method and bit error rate is synthesized. The results show that the BER of the QPSK/BPSK communication system will not be significantly reduced if the phase jitter RMS caused by the phase noise is less than 5 degrees, so 5 degrees can be used as a reference for the decomposition of the carrier SSB phase noise index. The simulation results have been successfully applied to a satellite inter-satellite link system, which has universal practical application value.
Spacecraft formation flying (SFF) in highly elliptical orbit (HEO) has attracted a great deal of attention in many space exploration applications, while precise guidance, navigation, and control (GNC) technology—especially precise ranging—are the basis of success for such SFF missions. In this paper, we introduce a novel K-band microwave ranging (MWR) equipment for the on-orbit verification of submillimeter-level precise ranging technology in future HEO SFF missions. The ranging technique is a synchronous dual one-way ranging (DOWR) microwave phase accumulation system, which achieved a ranging accuracy of tens of microns in the laboratory environment. The detailed design and development process of the MWR equipment are provided, ranging error sources are analyzed, and relative orbit dynamic models for HEO formation scenes are given with real perturbations considered. Moreover, an adaptive Kalman filter algorithm is introduced for SFF relative navigation design, incorporating process noise uncertainty. The performance of SFF relative navigation while using MWR is tested in a hardware-in-the-loop (HIL) simulation system within a high-precision six degrees of freedom (6-DOF) moving platform. The final range estimation errors from MWR using the adaptive filter were less than 35 m and 8.5 m/s for range rate, demonstrating the promising accuracy for future HEO formation mission applications.
In this study, submillimeter level accuracy K-band microwave ranging (MWR) equipment is demonstrated, aiming to verify the detection of the Earth’s gravity field (EGF) and digital elevation models (DEM), through spacecraft formation flying (SFF) in low Earth orbit (LEO). In particular, this paper introduces in detail an integrated BeiDou III B1C/B2a dual frequency receiver we designed and developed, including signal processing scheme, gain allocation, and frequency planning. The receiver matched the 0.1 ns precise synchronize time-frequency benchmark for the MWR system, verified by a static and dynamic test, compared with a time interval counter synchronization solution. Moreover, MWR equipment ranging accuracy is explored in-depth by using different ranging techniques. The test results show that MWR achieved 40 m and 1.6 m/s accuracy for ranging and range rate during tests, using synchronous dual one-way ranging (DOWR) microwave phase accumulation frame, and 6 m/s range rate accuracy obtained through a one-way ranging experiment. The ranging error sources of the whole MWR system in-orbit are analyzed, while the relative orbit dynamic models, for formation scenes, and adaptive Kalman filter algorithms, for SFF relative navigation designs, are introduced. The performance of SFF relative navigation using MWR are tested in a hardware in loop (HIL) simulation system within a high precision six degree of freedom (6-DOF) moving platform. The final estimation error from adaptive relative navigation system using MWR are about 0.42 mm (range/RMS) and 0.87 m/s (range rate/RMS), which demonstrated the promising accuracy for future applications of EGF and DEM formation missions in space.