The microstructural changes of nano- have been systematically studied using x-ray diffraction and Raman spectroscopy. The nano- grain assemblage possesses some features of the rutile structure, but has a large amount of defects: vacancies of oxygen, vacancy clusters, and local lattice disorder at the interface and interior surface, which lead to a significant lattice distortion and an evident space-symmetry reduction of and the appearance of a group of new Raman peaks. Two major Raman peaks and in accordance with Matossi's force constant model have been found. When the annealing temperature is close to 673 K, the density of vacant lattice sites and local lattice disorders decreased rapidly in the grains, and the lattice distortion and Raman peaks and almost disappeared at the same time. It suggests that and are closely related to the microstructural change of the nanocluster grains, or in other words, and peaks mark an additional characteristic of space symmetry of the grain assemblage of nano-. The Raman peak may be related to local clusters and vacancy clusters.
Gafchromic EBT (International Specialty Products, NJ, USA), radiochromic film is one of the newest radiation-induced auto-developing x-ray analysis films available for therapeutic radiation dosimetry in radiotherapy applications. Part of any radiochromic film product which undergoes a polymerization reaction for automatic darkening is an associated post-irradiation colouration whereby the film continues to darken after irradiation has ceased. The Gafchromic EBT film has been shown to produce an approximate 6% to 9% increase in post-irradiation optical density within the first 12 h of irradiation within the 1 Gy to 5 Gy dose range. This is compared to approximately 13%, 15% and 19% for MD-55-2, XR type T and HS radiochromic film, respectively. It is also shown that the EBT film's post-irradiation growth stabilizes to within 1% within the first 6 h. Thus EBT provides a reduced post-irradiation growth effect. However, to increase the accuracy of the film analysis, it is recommended that films be left for a significant period (at least 6 h) before the analysis is performed to provide a high level of accuracy. Also, calibration films must be read out with the same post-irradiation time to further enhance the accuracy of dosimetry.