Ferrofluid is a kind of magnetic fluid, the flow of which is controlled by an external magnetic field. Owing to this property, ferrofluid, as a new function material, has raised extensive concern in the oil industry. In this paper, the issue of ferrofluid flow in complex porous media has been studied by numerical simulation, and the validity and accuracy of the numerical algorithm are demonstrated through a 1-D horizontal tube example. Later, the effects of the magnetic force on ferrofluid flow in complex porous media, such as heterogeneous and fractured porous media, are investigated. The results show that there is basically no flow in low permeability or secondary fracture without a magnetic field, due to the characteristics of porous media and displacement pressure distribution. However, the ferrofluid flow velocity and domain can be changed by applying an external magnetic field. This novel phenomenon may provide a new idea to enhance oil recovery based on controllable flooding technology or meet other industrial needs by using ferrofluid.
Water flooding is crucial means to improve oil recovery after primary production. However, the utilization ratio of injected water is often seriously affected by heterogeneities in the reservoir. Identification of the location of the displacement fronts and the associated reservoir heterogeneity is important for the management and improvement of water flooding. In recent years, ferrofluids have generated much interest from the oil industry owning to its unique properties. First, saturation of ferrofluids alters the magnetic permeability of the porous medium, which means that the presence of ferrofluids should produce magnetic anomalies in an externally imposed magnetic field or the local geomagnetic field. Second, with a strong external magnetic field, ferrofluids can be guided into regions that were bypassed and with high residual oil saturation. In view of these properties, a potential dual-application of ferrofluid as both a tracer to locate the displacement front and a displacing fluid to improve recovery in a heterogeneous reservoir is examined in this paper. Throughout the injection process, the magnetic field generated by electromagnets and altered by the distribution of ferrofluids was calculated dynamically by applying a finite element method, and a finite volume method was used to solve the multiphase flow. Numerical simulation results indicate that the displacement fronts in reservoirs can indeed be detected, through which the major features of reservoir heterogeneity can be inferred. After the locations of the displacement fronts and reservoir heterogeneities are identified, strong magnetic fields were applied to direct ferrofluids into poorly swept regions and the efficiency of the flooding was significantly improved.
Aimed at the development of shale gas reservoirs with large reservoir thickness and multiple layers, this paper carried out a numerical simulation study on the optimization of three different well types: horizontal well, deviated well, and vertical well. To make the model more in line with the characteristics of shale gas reservoirs, a two-phase gas–water seepage mathematical model of shale gas reservoirs was established, considering the adsorption and desorption of shale gas, Knudsen diffusion effect, and stress sensitivity effect. The embedded discrete fracture model was used to describe hydraulic fracture and natural fracture. Based on Fortran language, a numerical simulator for multi-layer development of shale gas reservoirs was compiled, and the calculation results were compared with the actual production data of Barnett shale gas reservoirs to verify the reliability of the numerical simulator. The spread range of hydraulic fractures in the reservoir with different natural fracture densities is calculated by the simulation to determine well spacing and fracture spacing. The orthogonal experimental design method is then used to optimize the best combination of well spacing and fracture spacing for different well types. The results show that the well productivity of the high-density (0.012 m/m2) natural fractures reservoir > the well productivity of the medium-density (0.006 m/m2) natural fractures reservoir > the well productivity of the low-density (0.001 m/m2) natural fractures reservoir. According to the design of the orthogonal test, it can be seen that the most significant factor affecting the productivity of horizontal wells is the fracture spacing in the Y direction. For deviated wells and vertical wells, the X-direction well spacing has the greatest impact on its productivity.