HongZhen Hu

Mr. HongZhen Hu

JINGSU UNIVERSITY OF TECHNOLOGY
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
JTJing Tian
Jing Tian
SBShaoyi Bei
Shaoyi Bei
Bo LiBo Li
Bo Li
HHHongZhen Hu
HongZhen Hu
ZQZhenqiang Quan
Zhenqiang Quan
HTHaoran Tang
Haoran Tang
In the study of autonomous obstacle avoidance of intelligent vehicles, the traditional artificial potential field method has the problem that the vehicle may fall into the local minima and lead to obstacle avoidance failure. Therefore, this paper improves the traditional potential field function. Based on the vehicle dynamics model, a strategy of jumping out of local minima based on smaller steering angles is proposed. By finding a smaller steering angle and setting a suitable jump out step length, the intelligent vehicle is enabled to jump out of the local minima. Simulation experiments by MATLAB show that the improved method can jump out of the local minima. By comparing the planned trajectories of the traditional method and the improved method in static and dynamic obstacles situations, the trajectory planned by the improved method is smooth and the curvature is smaller. The planned trajectory is tracked by the Carsim platform, and the test results show that the improved method reduces the front steering wheel angle while the intelligent vehicle satisfies the vehicle dynamics constraints during active obstacle avoidance, which verifies the stability and rationality of the improved method.

13 March 2023 in Actuators
Verified
Journal Article
Open access
PDF file
浩汤浩然 汤
浩然 汤
SBShaoyi Bei
Shaoyi Bei
Bo LiBo Li
Bo Li
XSXiaoqiang Sun
Xiaoqiang Sun
CHChen Huang
Chen Huang
HHHongZhen Hu
HongZhen Hu
The current vehicle stability judgment methods in the stability control of distributed drive electric vehicles focuses on using the phase plane method, but the existing phase plane stability boundary delineation methods ignore the influence of the front wheel rotation angle. Therefore, a new phase plane partitioning method (NPPPM) is proposed in this paper, and a new phase plane stability domain library is established. Based on this, the direct yaw moment control of distributed drive electric vehicle through phase plane analysis is established. Firstly, the influence of the front wheel turning angle on the phase plane is considered in the design of the phase plane stability boundary, and a new stability boundary function is fitted by the least squares method. This approach avoids the lateral instability caused by too large a front-wheel turning angle and improves the accuracy of vehicle stability judgment. Next, a hierarchical direct transverse moment controller is constructed using Matlab/Simulink. Among them, the upper layer controller adopts sliding mode control with the sideslip angle error of the center of mass as the tracking target. The lower controller adopts the optimal configuration algorithm with the optimal road adhesion utilization as the objective function. Finally, the effectiveness and superiority of the proposed phase plane partitioning method (NPPPM) for distributed drive electric vehicles with sinusoidal and angular order inputs for the front wheel rotation angle are verified by simulation.

24 January 2022 in Actuators
Verified
Journal Article
Open access
PDF file
HHHongZhen Hu
HongZhen Hu
SBShaoyi Bei
Shaoyi Bei
QZQixian Zhao
Qixian Zhao
XHXiao Han
Xiao Han
DZDan Zhou
Dan Zhou
Bo LiBo Li
Bo Li
The preview model is one of the common methods used in trajectory tracking. The traditional fixed preview time is not adaptable to most speeds and road conditions, which not only reduces the tracking accuracy but also reduces the vehicle stability. Therefore, a controller can be designed to determine the adaptive preview time based on an optimization function of the lateral deviation, the road boundary, and the road boundary of the whole vehicle motion response characteristics. Traditional optimal preview control theory predicts the next state of the vehicle by the assumption of constant transverse pendulum angular velocity. In this paper, an expectation-based approach is used to find the ideal steering wheel turning angle based on the adaptive preview time, and a single-point preview model is established. Based on the two-degree-of-freedom dynamics model, a sliding mode controller is designed for control, and the low-pass filters are designed to suppress jitter in the sliding mode controller. Simulation results with different preview times, different speeds and different road adhesion coefficients prove that the controller has a good control effect and has good effectiveness and adaptability to speed and adhesion coefficient.

Verified
Journal Article
Open access
PDF file
SBShaoyi Bei
Shaoyi Bei
HHHongZhen Hu
HongZhen Hu
Bo LiBo Li
Bo Li
JTJing Tian
Jing Tian
HTHaoran Tang
Haoran Tang
YZYunhai Zhu
Yunhai Zhu
This article focuses on the trajectory tracking problem in the actuation control section of autonomous vehicles. Based on a two-degrees-of-freedom dynamics model, this paper combines adaptive preview control with a second-order sliding mode control method to develop a new control method. By designing an objective function based on lateral deviations, road boundaries, and the corresponding characteristics of the overall vehicle motion, the method adaptively adjusts the preview time to obtain the ideal yaw rate and then uses a second-order sliding mode control algorithm named Super-Twisting to calculate the steering wheel angle. Combining the low-pass filter with this controller can effectively suppress the chattering caused by the switching of the sliding mode plane while proposing a concept of smoothing based on gradient derivative, the smoothness after filtering is one-seventeenth of that before filtering, whereas the phase plane is used to prove its effectiveness and stability, it can be seen from the phase diagrams that all the state points are in the stable region. A joint simulation model of Matlab/Simulink and Carsim was built to verify the control effectiveness of the controller under the double-shift road, and the simulation results show that the designed controller has good control effect and high tracking accuracy. Meanwhile, the simulation model is also used for other simulations, firstly, simulation comparison tests were carried out with the Model Predictive Control algorithm at speeds of 36 and 54 km/h, compared to the MPC controller, the tacking accuracy of the ST controller has improved to 64.42% and 51.02% at 36 and 54 km/h; secondly, taking simulation of the designed controller against a conventional sliding mode controller based on isokinetic law of convergence, compared to the CSMC controller, the tracking accuracy of the ST controller has improved 41.78% at 54 km/h, and the smoothness of the ST controller is one-nineteenth of that of the CSMC controller; thirdly, carrying out simulations on parameter uncertainties, and replacing parameter uncertainty with Gaussian white noise, the maximum tracking error at 36 and 54 km/h did not exceed 0.3 m, and tracking remains good. Small fluctuations in the steering wheel angle do not affect the normal actuation of the actuator.

14 September 2022 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
CWcheng wu
cheng wu
Bo LiBo Li
Bo Li
SBShaoyi Bei
Shaoyi Bei
YZYunhai Zhu
Yunhai Zhu
JTJing Tian
Jing Tian
HTHaoran Tang
Haoran Tang
The current commercial intelligent driving systems still take the optimal strategy judged by the machine to be the only goal. Therefore, in order to improve the driving experience of the intelligent driving following scene, based on the assumption that environmental factors remain unchanged for a short time, five important parameters affecting the following scene are selected through correlation analysis, and vehicle-following research is carried out. This paper adopts a driver-following model based on a Genetic Algorithm (GA)-optimized Back Propagation (BP) neural network. Based on the data of next-generation simulation (ngsim), this paper selects vehicle 32 (32 represents the ID of the vehicle in the ngsim project) as the main vehicle in order to study short-term driving habits. A BP neural network is built using MATLAB; 60% of the data of vehicles 32 and 29 is used for the training set, 20% is used for the verification set, and 20% for the test set. Because short-term prediction requires high timeliness, the genetic algorithm is used to optimize the initial weights of the neural network, which not only accelerates the convergence speed but also plays a role in avoiding the local optimal solution. The experimental results show that compared with the traditional stimulus-response vehicle-following model, this model has a following ability that is more in line with the driver’s driving habits in terms of ensuring following safety.