Hussein Al-Zubaidi

Dr. Hussein Al-Zubaidi

Assist. Prof. Dr., Department of Environmental Engineering, College of Engineering, University of Babylon, Babylon, Iraq; alzubaidih10@gmail.com; hussein.alzubaidih10@uobabylon.edu.iq

Research Focus & Metrics

Academic Career Length

27Years (2000-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2019 in Journal of Geophysical Research: Oceans
Verified
Journal Article
Open access
PDF file
DRDavid K. Ralston
David K. Ralston
STStefan Talke
Stefan Talke
WGW. Rockwell Geyer
W. Rockwell Geyer
HAHussein Al-Zubaidi
Hussein Al-Zubaidi
CSChristopher K. Sommerfield
Christopher K. Sommerfield
Since the late nineteenth century, channel depths have more than doubled in parts of New York Harbor and the tidal Hudson River, wetlands have been reclaimed and navigational channels widened, and river flow has been regulated. To quantify the effects of these modifications, observations and numerical simulations using historical and modern bathymetry are used to analyze changes in the barotropic dynamics. Model results and water level records for Albany (1868 to present) and New York Harbor (1844 to present) recovered from archives show that the tidal amplitude has more than doubled near the head of tides, whereas increases in the lower estuary have been slight (<10%). Channel deepening has reduced the effective drag in the upper tidal river, shifting the system from hyposynchronous (tide decaying landward) to hypersynchronous (tide amplifying). Similarly, modeling shows that coastal storm effects propagate farther landward, with a 20% increase in amplitude for a major event. In contrast, the decrease in friction with channel deepening has lowered the tidally averaged water level during discharge events, more than compensating for increased surge amplitude. Combined with river regulation that reduced peak discharges, the overall risk of extreme water levels in the upper tidal river decreased after channel construction, reducing the water level for the 10‐year recurrence interval event by almost 3 m. Mean water level decreased sharply with channel modifications around 1930, and subsequent decadal variability has depended both on river discharge and sea level rise. Channel construction has only slightly altered tidal and storm surge amplitudes in the lower estuary.

1 August 2019 in Water Science & Technology
Verified
Journal Article
Closed access
PDF file
ANAhmed Samir Naje
Ahmed Samir Naje
MAMohammed A. Ajeel
Mohammed A. Ajeel
IAIsam Mohamad Ali
Isam Mohamad Ali
HAHussein Al-Zubaidi
Hussein Al-Zubaidi
PAPeter Adeniyi Alaba
Peter Adeniyi Alaba
In this work, landfill leachate treatment by electrocoagulation process with a novel rotating anode reactor was studied. The influence of rotating anode speed on the removal efficiency of chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS) of raw landfill leachate was investigated. The influence of operating parameters like leachate pH, leachate temperature, current, and inter-distance between the cathode rings and anode impellers on the electrocoagulation performance were also investigated. The results revealed the optimum rotating speed is 150 rpm and increasing the rotating speed above this value led to reducing process performance. The leachate electrocoagulation treatment process favors the neutral medium and the treatment performance increases with increasing current intensity. Furthermore, the electrocoagulation treatment performance improves with increasing leachate temperature. However, the performance reduces with increasing inter-electrode distance.

18 March 2019 in Separation Science and Technology
Verified
Journal Article
Closed access
ANahmed naje
ahmed naje
MAMohammed A. Ajeel
Mohammed A. Ajeel
RMRahman Mahdi
Rahman Mahdi
RARaid T. Alkhateeb
Raid T. Alkhateeb
HAHussein Al-Zubaidi
Hussein Al-Zubaidi
In this work, the mass transfer of aluminum ions in the electrocoagulation reactor was investigated using limiting current density technique by employing a novel rotating impeller anode. The effect of different anode rotational speeds of 75, 100, 150, 200, and 250 rpm with various anode diameters of 9.2, 10.2, and 11.2 cm on limited current values, mass transfer coefficient and COD removal efficiency were studied. Results showed the limited current values increase with the increase of the rotational speed and diameter of the impeller anode. Furthermore, the mass transfer coefficient increases with the increase of rotational speed and impeller diameter. Data for the conditions 11,852 < Re < 58,550 and 88 < Sc < 285 were found to fit the equation for the largest diameter of 11.2 cm; Sh = 2.1Re0.93 Sc0.33. Moreover, the maximum COD removal efficiency was at the largest anode diameter of 11.2 cm, validating the enhancement of aluminum mass transfer by increasing anode diameter.

7 January 2019 in Global Nest Journal
Verified
Journal Article
Closed access
HAHussein Al-Zubaidi
Hussein Al-Zubaidi
This study investigates the effectiveness of fly ash-based geopolymer concrete was conducted to be used as an alternative material to replace the normal concrete. The concrete mixture was prepared by mixing fly ash, fine aggregate, nano-slag, and SP in Na2SiO3/NaOH solution. The mixture was divided into three different groups, with constant water to fly ash ratio of 0.1, and different alkaline content: 0.4, 0.45, and 0.5 of fly ash rather than two curing techniques (moist and autoclave). Several hardeness properties of concrete like compressive strength, density; and splitting tensile strength were examined after 28 d. The microstructural development of geopolymer concrete was monitored using X-Ray Diffractometer. Based on the results of this investigation, it is recommended to cure the geopolymer concrete by autoclaving rather than the traditional moist technique, especially at lower alkaline dosage. However, the partial addition of nano slag by weight of FA had a positive effect on both curing techniques.

1 January 2021 in Cogent Engineering
Verified
Journal Article
Open access
HAHussein Al-Zubaidi
Hussein Al-Zubaidi
ANAhmed S. Naje
Ahmed S. Naje
ZAZaid Abed Al-Ridah
Zaid Abed Al-Ridah
ACAli Chabuck
Ali Chabuck
IAIsam Mohamad Ali
Isam Mohamad Ali
An integrated linear regression technique was developed and validated to model dissolved oxygen in salt lakes by using R software and based on data from Sawa Lake, Iraq. The technique helps understand and evaluate salty aquatic ecosystems in the presence of water quality data gaps. The technique involved selecting the important water quality parameters that have significant statistical relationship with dissolved oxygen. In order to make the regression development simpler, the validation approach was incorporated with the model. Linearity, homogeneity, normality, outliers, and influential data points were verified. The simulation approach was also capable of displaying the interaction between the selected water quality parameters and the other insignificant parameters. The statistical analysis results indicated that dissolved oxygen in salt lakes is a function of total dissolved solids. The developed model represented dissolved oxygen with R-squared of 90.73% and p-value of 1.08E-06. Furthermore, the model results showed that the influence of salty ions on dissolved oxygen/total dissolved solids model is the same. It was found that temperature has a significant impact on the developed dissolved oxygen model. In addition, the model simulation revealed that salt melting surrounding the lake due to temperature variation during the year cycle increased total dissolved solids in the lake water. Consequently, the lake dissolved oxygen levels were impacted.

11 October 2018 in Journal of Hydraulic Research
Verified
Journal Article
Closed access
HAHussein Al-Zubaidi
Hussein Al-Zubaidi
Scott WellsScott Wells
Scott Wells
A new 3D hydrodynamic model was developed to simulate water quality transport in surface waterbodies. The governing equations are the continuity equation, free surface equation, momentum equation and transport equation. The 2D numerical scheme of CE-QUAL-W2 was expanded in three dimensions and modified to solve for the free surface elevation. A time splitting technique was employed to solve the momentum and transport equation. The numerical formulation of the 3D scheme used a novel solution, which resulted in a tri-diagonal matrix form for solving the free surface equation rather than a more computationally intensive penta-diagonal matrix solution. In addition, the hydrodynamic and water quality equations were solved at the same time step in order to allow feedback between water quality and hydrodynamics. The verification of the model hydrodynamics and temperature was performed by comparing the model predictions to known analytical solutions and field data from Lake Chaplain, Washington, USA. There was good agreement of the solution of the hydrodynamic equations to analytical solutions and field data.